HobbyKing
TURNIGY AE-65A BRUSHLESS ESC
| Output | Continuous 65A, burst 70A up to 10 seconds. |
| Input Voltage | 2-6 cells lithium battery or 5-18 cells NIMH battery. |
| BEC | Linear 4A @ 5V |
| Control Signal Transmission | Optically coupled system. |
| Max Speed | 2 Pole |
| 6 Pole | 70,000rpm |
| 12 Pole | 35,000rpm |
| Size | 70mm (L) * 34mm (W) * 17mm (H). |
| Weight | 73g. |
| Multiple protection features | Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection |
| Factory default settings | Brake |
| Battery type | Li-xx (Li-ion or Li-Po) |
| Low voltage cutoff threshold | Soft cut-off (2.6V) |
| Timing setup | Low |
| Soft Acceleration Start Up | Normal |
| Low voltage cutoff type | Medium |
Specification:, Features:, High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency., Programming features:, Brake setting (we recommend using brake for only folding props applications),
The Turnigy AE series are based on new powerful microprocessor. ...5 Reviews
HobbyKing
TURNIGY OLEO LEGS WITH INTEGRAL BRAKING SYSTEM FOR LARGE SCALE 90MM/1.20 CLASS MODELS TRICYCLE
| Pin size | 5mm |
| Weight | 240g |
| Max Model Weight | 7500g |
| Operating Voltage | 4.8v~6v |
Wheels:, 72mm (Mains) 64mm (Nosewheel),
Turnigy Oleo Legs with Integral Braking System ( 90mm~120mm Scale ...HobbyKing
TURNIGY FULL METAL SERVOLESS RETRACT WITH OLEO LEGS AND BRAKING SYSTEM F-16 STYLE LARGE SCALE
| Pin size | 5mm |
| Weight | 426g |
| Max Model Weight | 7500g |
| Operating Voltage | 4.8v~6v |
High quality servoless retract system specifically designed for larger EDF models with angled fuselage mounted under-carriage (eg: F-16/F-18). The retracts feature an all metal construction for precision, reliability and durability as well as auto cut off for protection against excessive current draw., Wheels:, 64mm (Mains) 64mm (Nosewheel),
Turnigy Full Metal Servoless Retract with Oleo Legs and Braking ...HobbyKing
TURNIGY FULL METAL SERVOLESS RETRACT WITH OLEO LEGS AND BRAKING SYSTEM (SUITS 90MM HAWK AND L-59)
| Pin size | 5mm |
| Weight | 307g |
| Max Model Weight | 7500g |
| Operating Voltage | 4.8v~6v |
Wheels:, 45mm (Mains) 45mm (Nosewheel),
Full Metal Servoless Retract with Oleo Legs (Tricycle - 90 ...5 Reviews
HobbyKing
TURNIGY FULL METAL SERVOLESS RETRACT WITH OLEO LEGS AND BRAKING SYSTEM (SUITS 90MM T-45 AND L-59)
| Pin size | 5mm |
| Weight | 313g |
| Max Model Weight | 7500g |
| Operating Voltage | 4.8v~6v |
Wheels:, 45mm (Mains) 38mm (Nosewheel),
Full Metal Servoless Retract with Oleo Legs (Tricycle - 90 ...HobbyKing
TURNIGY FULL METAL SERVOLESS RETRACT W/OLEO LEGS AND BRAKING SYSTEM (90MM T-33)
| Pin size | 5mm |
| Weight | 382g |
| Max Model Weight | 7500g |
| Operating Voltage | 4.8v~6v |
Wheels:, 70mm (Mains) 50mm (Nosewheel),
Full Metal Servoless Retract with Oleo Legs (Tricycle - 90 ...HobbyKing
FULL METAL SERVOLESS RETRACT WITH OLEO LEGS (TRICYCLE, MIG 17 TYPE) 90-1.20 CLASS
| Pin size | 4mm |
| Wheels | 54mm (Mains) 45mm (Nosewheel) |
| Weight | 195g |
| Max Model Weight | 6500g |
| Operating Voltage | 4.8v~6v |
5 Reviews
HobbyKing
HOBBYKING PARALLEL CHARGING BOARD FOR 6 PACKS 2~6S (EC3)
| Cell | 2~6S |
| Voltage | 0~22.2VDC |
| Max current | 30A |
| Connector | EC3/jst-xh |
| Note | The batteries should have same capacity. |
Battery:, 6 packs (same capacity & cell count),
Our very own in-house designed and built parallel charge board! ...3 Reviews
HobbyKing
NTM ROTOR DRIVE 450 SERIES 3400KV / 500W
| Max Cont. Current | 30A |
| Burst Current (5 sec) | 46A |
| Max Power | 500W @ 11.1V |
| Shaft | 3.5mm |
| Weight | 96g |
| Cell count | 3s Lipoly |
| Bolt holes | 16mm x 16mm |
Specs:, Model:, NTM Rotor Drive Series 2938 3400kv, Kv:3400rpm/v, Poles:3, Bolt thread:M2, Connection:, 3.5mm Bullet-connector,
NTM Rotor Drive, our latest addition to the NTM performance ...5 Reviews
HobbyKing
NTM ROTOR DRIVE 450 SERIES 1700KV / 930W
| Max Cont. Current | 30A |
| Burst Current (5 sec) | 42A |
| Max Power | 930W @ 22.2V |
| Shaft | 3.5mm |
| Weight | 96g |
| Cell count | 6s Lipoly |
| Bolt holes | 16mm x 16mm |
Specs:, Model:, NTM Rotor Drive Series 2938 1700kv, Kv:1700rpm/v, Poles:3, Bolt thread:M2, Connection:, 3.5mm Bullet-connector,
NTM Rotor Drive, our latest addition to the NTM performance ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR SCT 5.5T SENSORED BRUSHLESS MOTOR 3750KV (550 SIZE)
| Can Size | 550 |
| RPM/v | 3750kv |
| Max voltage | 7.4~11.1 (2~3S) |
| Max Current | 112A |
| Max Watts | 810w |
| Resistance | 0.0069ohm |
| No Load Current | 2.9A |
| Shaft Size | 5mm |
| Can Diameter | 36mm |
| Can Length | 65mm |
| Weight | 236g |
Features:, • Sensor-Based for Excellent Torque and Low-Speed Driveability, *Note:, Sensor cable included, Specs:, Turns:4, Poles:2, Sensored:, Yes (Standard 6 pin harness),
The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR SCT 5T SENSORED BRUSHLESS MOTOR 4150KV (550 SIZE)
| Can Size | 550 |
| RPM/v | 4150kv |
| Max voltage | 7.4~11.1 (2~3S) |
| Max Current | 120A |
| Max Watts | 860w |
| Resistance | 0.0061ohm |
| No Load Current | 3.6A |
| Shaft Size | 5mm |
| Can Diameter | 36mm |
| Can Length | 65mm |
| Weight | 236g |
Features:, • Sensor-Based for Excellent Torque and Low-Speed Driveability, *Note:, Sensor cable included, Specs:, Turns:4, Poles:2, Sensored:, Yes (Standard 6 pin harness),
The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR SCT 4.5T SENSORED BRUSHLESS MOTOR 4550KV (550 SIZE)
| Can Size | 550 |
| RPM/v | 4550kv |
| Max voltage | 7.4 (2S) |
| Max Current | 128A |
| Max Watts | 910w |
| Resistance | 0.0057ohm |
| Shaft Size | 5mm |
| Can Diameter | 36mm |
| Can Length | 65mm |
| Weight | 236g |
Features:, • Sensor-Based for Excellent Torque and Low-Speed Driveability, *Note:, Sensor cable included, Specs:, Turns:4, Poles:2, Sensored:, Yes (Standard 6 pin harness), No Load Current:4A,
The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR 1/8TH SENSORED BRUSHLESS MOTOR 2100KV
| Size | 4270 |
| RPM/v | 2100kv |
| Sensored | Yes |
| Max voltage | 15V (4S) |
| Max Current | 140A |
| Max Watts | 2100W |
| Resistance | 0.007ohm |
| Shaft Size | 5mm |
| Can Diameter | 42mm |
| Can Length | 70mm |
| Weight | 329g |
Features:, • Sensor-Based for Excellent Torque and Low-Speed Driveability, *Note:, Sensor cable included, Specs:, Poles:4,
The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at ...5 Reviews
HobbyKing
MERCURY ALLOY 12 BLADE 90MM 1900KV EDF UNIT (6S)
| EDF Unit | 90mm |
| Battery | 22.2v (6s) |
| AMP Draw | 95 amp (Max) |
| Watts | 2166 watts (Max) |
| Thrust | 3500g |
| ESC | 120A |
| Unit Weight | 435g |
| Width Front - 98mm, Width Rear - 92mm, Length | 119mm |
Motor:, 4090-1900kv High Performance EDF Brushless, Shroud Dimensions:, Test Data:, 22.8v (6s) 5200mah / 95amp / 2166watt / 3500g Thrust,
A result of 3 years in research and development these ...5 Reviews