ReadyMadeRC
FY-G3 ULTRA 3-AXIS BRUSHLESS GIMBAL FOR AIRCRAFT
http | //youtu.be/wIFOWAwBo7Y |
http | //youtu.be/-OVfotQxy8w |
FY-G3Ultra 3-Axis Brushless Gimbal For Aircraft ---- Ground Test :, FY-G3Ultra 3-Axis Brushless Gimbal For Aircraft ---- Flight Test :, FY-G3 Ultra Gimbal needs to be initialized when the following situation appears:, 1. After power on, the angle of pitch has a little angle difference with the horizon line., Initializing the FY-G3 Ultra Gimbal:, Keep the gimbal in the still condition, then power on , it will initialize automatically.After that the gimbal can work normally.,
Introduction FY-G3 Ultra 3 Axis Brushless Gimbal ( For Aircraft ...ReadyMadeRC
UMX RADIAN BNF
Wingspan | 28.7 in (730mm) |
Overall Length | 16.5 in (418mm) |
Flying Weight | 1.50 oz (43 g) |
Motor Size | 8.5mm coreless brushed motor |
Radio | 4+ channel transmitter required |
CG (center of gravity) | 1.22 in (31mm) back from the leading edge of wing at wing root |
Recommended Battery | 1S 3.7V 150mAh 25C LiPo |
Approx. Flying Duration | 8-10 minutes |
Charger | 1S 300mA LiPo USB Charger |
Minimum Age Recommendation | 14 years |
Experience Level | Intermediate |
Recommended Environment | Indoor/Outdoor |
Assembly Time | Less than 1 Hour |
Is Assembly Required | Yes |
® technology gives a pilot the feeling of flying a much larger glider especially outdoors because of its renowned ability to smooth out the effects of wind and turbulence. Its distinctively curved wing delivers outstanding lift and impressive glide ratio using 3-channel control simplicity. The lightweight brushed power system requires just a single-cell Li-Po battery to provide excellent launch performance and long flight times. Plus the one-piece wing can be easily removed and stored in the handle-equipped box making your ability to soar through the clouds as convenient as can be. You’ll be in the air in no time thanks to great features like:, , Flaps: No,
The first ultra micro motor glider with AS3X® technology. Features ...ReadyMadeRC
VOLANTEX RC - RANGER EX 757-3 (PNP)
Wingspan:, 1980mm (77.9 in), Overall Length:, 1170mm (46 in), Flying Weight(without battery):, 1500g, Prop Size:, 1060 Propeller, Motor Size:, 3715 (1000kV) powerful out runner brushless motor, Speed Control :, Easy-Plug 40A Switch-mode BEC brushless ESC, Recommended Battery:, 11.1V/14.8V 1800mAh ~ 10000mAh Li-Po (Possibly More), Charger:, Not included, Flaps:, Yes (Servos not included), Retracts:, No, Radio:, 2.4Ghz 6-Channels, Minimum Age Recommendation:, 14 years, Experience Level:, Beginners ~ Expert, Recommended Environment:, Outdoor, Assembly Time:, Less than half hour, Is Assembly Required:, Yes,
Key Features Now includes plastic hinges in horizontal stabilizer Big, ...ReadyMadeRC
VOLANTEX RC - RANGER EX 757-3 (KIT)
Note | Kit does not include Motor/ESC/Servos |
Wingspan:, 1980mm (77.9 in), Overall Length:, 1170mm (46 in), Flying Weight(without battery):, 1500g, Prop Size:, 1060 Propeller, Motor Size:, 3715 powerful out runner brushless motor, Speed Control :, Easy-Plug 40A Switch-mode BEC brushless ESC, Recommended Battery:, 11.1V/14.8V 1800mAh ~ 10000mAh Li-Po (Possibly More), Charger:, Not included, Flaps:, Yes (Servos not included), Retracts:, No, Radio:, 2.4Ghz 6-Channels, Minimum Age Recommendation:, 14 years, Experience Level:, Beginners ~ Expert, Recommended Environment:, Outdoor, Assembly Time:, Less than half hour, Is Assembly Required:, Yes,
Key Features Now includes plastic hinges in horizontal stabilizer Big, ...ReadyMadeRC
TIGER MOTOR - U7 KV420 V2.0
Test Environment | Motor |
ESC | T-MOTOR T80A (We recommended the T80A ESC as the default combination with U7 @ 6S.) |
Prop | T-MOTOR 17*5.8CF/18*6.1CF |
Power | 22.2V constant voltage power supply |
Specifications:, KV.............................................................................................................420,
Configu-ration....................................................................................12N14P Shaft Diameter........................................................................................6mm Motor Dimension(Dia.*Len).........................................................Φ60.7×39.5mm Weight(g)..................................................................................................255g ldle current(10)@10v(A)..........................................................................0.9A No.of Cells(Lipo)......................................................................................3-8S ...ReadyMadeRC
IFTRON - STINGER PRO 5.8GHZ 25MW AV TRANSMITTER
Item Description Our new Lower Power Nano 5.8 transmitters conform with the power requirements of many countries that limit the RF power to 25mw. Features include: on-board switching power for ultra-wide input voltage, plus one line-level audio input- all at a very economical price. Want more power and features? Please see our Mondo Stinger 5.8 or Stinger Pro 8.5 transmitters. Comes with whip antenna Audio cable and one of these Plug & Play Power/video Cables (See picture below) If you already have a camera that uses a 3 pin connector, please check the connector picture for wiring compatibility with your camera. If your camera is opposite of ours, please ask for a "REVERSE" cable when ordering or you will have to reverse it yourself. All Iftron Transmitters are Urethane Conformal Coated for moisture protection. Comes with antenna and input cable. Made in USA Lead Free Wiring and Information Here,
Channel 1 5.740GHz Channel 2 5.760 GHz Channel 3 5.780 ...ReadyMadeRC
800MW* 1300MHZ TRANSMITTER - INTERNATIONAL VERSION (OLD)
Weight with case and antenna | 3.4oz. |
High quality 800mW* 1300MHz transmitter. Not the cheap copies available on eBay and from other overseas sources. Although the manufacturer calls this an 800mW transmitter, and other retailers sell it stating it's that power level, they actually put out 600mW of power (including the ones from the other vendors). We take the time to verify the ratings from the manufacturers. Do the other dealers? :), Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
DO NOT BACK ORDER. ONCE SOLD OUT, ONLY THE NEW ...ReadyMadeRC
TRANSMITTER CABLE (LARGE PLUG)
Total cable length of 12", terminated in two male servo connectors: one with video, power, and ground for video, and one with audio, power, and ground for audio. Note that this cable will supply the battery voltage directly to the components, so if your cameras require 5v you will need to insert a regulator in the line before it gets to the camera.,
This is a 4-wire camera lead compatible with many different ...ReadyMadeRC
800MW* 1300MHZ TRANSMITTER - NEW CUSTOM READYMADERC US VERSION
Weight with case and antenna | 3.4oz. |
High quality 800mW* 1300MHz transmitter. Not the cheap copies available on eBay and from other overseas sources. Although the manufacturer calls this an 800mW transmitter, and other retailers sell it stating it's that power level, they actually put out 600mW of power (including the ones from the other vendors). We take the time to verify the ratings from the manufacturers. Do the other dealers? :), *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
WE'VE OPENED UP A WHOLE NEW FREQUENCY FOR LEGAL USE ...ReadyMadeRC
800MW* 1300MHZ TRANSMITTER - NEW CUSTOM READYMADERC INTL VERSION
Weight with case and antenna | 3.4oz. |
CH4 | 1080MHZ |
CH5 | 1120MHZ |
CH6 | 1160MHZ |
CH7 | 1200MHZ |
CH8 | 1240MHZ |
CH9 | 1280MHZ |
CHH | 1320MHZ |
CHC | 1360MHZ |
CHd | 1258MHZ |
High quality 800mW* 1300MHz transmitter. Not the cheap copies available on eBay and from other overseas sources. Although the manufacturer calls this an 800mW transmitter, and other retailers sell it stating it's that power level, they actually put out 600mW of power (including the ones from the other vendors). We take the time to verify the ratings from the manufacturers. Do the other dealers? :), Frequencies:, *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
WE'VE OPENED UP A WHOLE NEW FREQUENCY FOR LEGAL USE ...ReadyMadeRC
900MHZ 800MW* TRANSMITTER - US VERSION
Weight with case and antenna | 3.4oz. |
High quality 800mW* 900MHz transmitter. Not the cheap copies available on eBay and from other overseas sources. Although the manufacturer calls this an 800mW transmitter, and other retailers sell it stating it's that power level, they actually put out a measured 650mW of power (including the ones from the other vendors). We take the time to verify the ratings from the manufacturers. Do the other dealers? :), Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
Comes with heat sink as shown, which can be removed ...ReadyMadeRC
900MHZ 800MW* TRANSMITTER - INTERNATIONAL VERSION
Weight with case and antenna | 3.4oz. |
High quality 800mW* 900MHz transmitter. Not the cheap copies available on eBay and from other overseas sources. Although the manufacturer calls this an 800mW transmitter, and other retailers sell it stating it's that power level, they actually put out a measured 650mW of power (including the ones from the other vendors). We take the time to verify the ratings from the manufacturers. Do the other dealers? :), Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
Comes with heat sink as shown, which can be removed ...ReadyMadeRC
G-FORCE MICROSENSOR - HIGH G SENSOR
Resolution | approx. 0.05 G in each axis |
Power input (Standalone Mode) | 4V to 16V (6V max for High G Sensor) |
Weight | approximately 4 grams (0.15 oz) |
Dimensions | approximately 28 mm x 16 mm x 10 mm (1.1” x 0.62” x 0.4”) |
ReadyMadeRC
TRANSMITTER CABLE (MINI)
Total cable length of 12", terminated in two male servo connectors: one with video, power, and ground for video, and one with audio, power, and ground for audio. Note that this cable will supply the battery voltage directly to the components, so if your cameras require 5v you will need to insert a regulator in the line before it gets to the camera.,
This is a 4-wire camera lead compatible with many different ...ReadyMadeRC
CAMERA CABLE (3-WIRE)
The wiring order on the camera connector as delivered will fit the following cameras directly:, RMRC-520, RMRC-420XV, RMRC-MINI, RMRC-PICO, DPC-171/KX-171,, It will fit the following cameras by simply rearranging the wiring order (User responsible for verifying compatibility):, SN777 , KX-131, KX-191, Others?, PLEASE NOTE: This cable feed the voltage directly, so if you're powering your system with a 12V battery and you have a 5V camera such as the KX131, you need to either use a regulator before the cable.,
This is a 3-wire camera lead compatible with many different ...