HiModel
E-SMART ELECTRIC 3D HELICOPTER (CARBON FIBER & METAL VERSION) W/MOTOR EK5H-E002
| (4).Main blade diameter | 1185mm; |
| (5).Tail blade diameter | 220mm; (6).Engine Drive Gear |
| (7).Main Drive Gear | 120T; |
| (9).Empty weight | 1600g; |
| Type | EK5-0007 |
| Motor weight | 305g |
| Motor Length | 63.5mm |
| Motor Diameter | 43.0mm |
| Shaft diameter | 5mm |
| No load current | 5.0A |
| Max current | 50A |
| Speed controller requirement | 80A |
| (1).Lithium Battery | 6S2P |
| (2).Brushless motor | 1200RPM/V |
| (3).Transmitter | 6 channel or more(Helicopter system) |
| (4).Receiver | 6 channel or more |
| (5).Gyro | 1pcs |
| (6).servo | Above 38g,4pcs |
| (7).Speed Controller | 70A or above |
, , , , , , Specifications:, , , , , , , , , , , 【Specification:】, (1).Length：1070mm;, (2).Height：370mm;, (3).Width：210mm;, (8).Gear ratio:1:12:4.62;, 【Brushless motor specification:】, KV: 1200, 【Recommended Power and Radio Equipment(Not included in kit):】, , ,
Features: This is the carbon fiber and metal version of ...HiModel
CYCLOPS BREEZE OSD SYSTEM W/GPS
| Power supply | 7-13V (support 3S lipo) |
| Main board weight | 7.2g |
| GPS module weight | 9.2g |
, , , , , , Specifications:, , , , , , , , , , , CYCLOPS BREEZE OSD System W/GPS, , ,
Features: CYCLOPS BREEZE OSD System W/GPS - it adapts to ...HiModel
100A CURRENT MODULE FOR CYCLOPS SERIES OSD SYSTEMS
| Current range | 0-100A |
| Max input voltage | 30V |
| Main board weight | 7.2g |
| module weight | 17g |
, , , , , , Specifications:, , , , , , , , , , , Current Module for CYCLOPS Series OSD Systems, *HINT: OSD main board only support 2-3S Lipo, when your main battery is higher than 3S, then you must use separate 2-3S battery pack to power the main board, otherwise it will burn the main board., , ,
Features: Compatible with Cyclops all series OSD systems. Includes/Requires: Includes: ...HiModel
Φ65×H58 DUCTED FAN ( EDF ) W/B28 BRUSHLESS MOTOR
| Type | Φ65×H58 Ducted Fan ( EDF ) |
| Brushless motor | B28 4000KV |
| Thrust | 750-950 g |
| Speed controller required | 36A (brushless) ( not included ) |
| Inner Diameter | 65.6mm |
| Outer Diameter | 69.4mm (Not including the flange nor fins) |
| Hight | 44.5mm / 61mm ( Without / with the flange ring ) |
| Motor Housing Inner Diameter | 29mm |
| Motor Collet Diameter | for 2mm motor shaft |
| Weight | 187g / 6.7oz (with brushless motor) |
, , , , , , Specifications:, , , , , , , , , , , , HiModel Electric Ducted Fan Specification (for reference only), Code, , Size/mm, , Blades, , Main body weight (g), , Ring, Weight/g, , Recommend Motor, , Shaft Dia. /mm, , ESC, , Battery capacity, , Voltage, , r.p.m, , Thrust, , Blades fixing method, , 03-098P, , Φ48×H28, , 3p, , 11.5, , 0, , Brushed Motor, , 130-180, , 2.0, , 5A, , Lipo 800MAH, , 7.2-11.1V, , 40000up, , 90-150g, , direct push, , Brushless Motor, , B20, , 2.0, , 10A, , Lipo 800MAH, , 9.4-14.8V, , 4000kv, , 100-200g, , 03-099P, , Φ50×H28, , 6p, , 12.5, , 0, , Brushed Motor, , 130-180, , 2.0, , 5A, , Lipo 800MAH, , 7.2-11.1V, , 40000up, , 100-200g, , direct push, , Brushless Motor, , B20, , 2.0, , 10A, , Lipo 800MAH, , 9.4-14.8V, , 4000kv, , 150-350g, , 03-100P, , Φ55×H42, , 6p, , 18.5, , 0, , Brushed Motor, , 370, , 2.0, , 15A, , Lipo 1600MAH, , 7.2-11.1V, , 40000up, , 150-250g, , once center balanced,fix with AB glue, , Brushless Motor, , B28-47-09S, , 2.0, , 18A, , Lipo 1600MAH, , 9.4-14.8V, , 4000kv, , 200-400g, , 03-101P, , Φ65×H58, , 6p, , 30, , 12, , Brushed Motor, , 370, , 2.3, , 25A, , Lipo 2200mah, , 7.2-11.1V, , 30000up, , 250-400g, , once center balanced,fix with AB glue, , Brushless Motor, , B28-47-09S, , 3.17, , 36A, , Lipo 2200mah, , 9.4-14.8V, , 4000kv, , 750-950g, , 03-102P, , Φ68×H58, , 5p, , 59.5, , 13, , Brushed Motor, , 380, , 2.3, , 15A, , Lipo 2400-3300MAH, , 7.2-11.1V, , 30000up, , 300-400g, , once center balanced,fix with AB glue, , Brushless Motor, , B28-47-09S, , 3.17, , 40A, , Lipo 2400-3300MAH, , 9.4-14.8V, , 4000kv, , 750-950g, , Note:, 1. This EDF can be powered by both brushless and brushed motors, but the motor shaft adaptors are differnt for brushless motors and brushed motors., 2. DO NOT use brushed motor adaptor for brushless motor, vice versa., 3. To ensure the best thrust output, special attention must be given to the power centeral ,
HiModel
HIMODEL 1.4G LOW PASS FILTER LPF1400 | SMA PLUG TO SMA JACK
| Antenna connector | SAM standard (male / female) (one end SMA plug, another end SMA jack) |
| Weight | 5g / 0.2oz |
| Cut frequency | 1.4G |
, , , , , , Specifications:, , , , , , , , , , , Low pass filter, Impedance 50Ω, Refer to here for connector type diagram, Handles RF power up to 8 watts, Characteristic impedance 50Ω., * This filter can only used for 1.4G or below video RX/TX system, does NOT suit for 2.4G or 5.8G system., , ,
Features: - Tiny size - Low weight, only 5g - ...HiModel
HDMI TO AV CONVERSION MODULE
| Signal input port type | standard HDMI |
| Video format supported | NTSC/ PAL |
| Power supply | 5V (not higher than 5.5V, suggested to use a separate UBEC to power the device) |
| Audio format | stereo PCM |
| Signal output | standard A/V |
| Weight | 39g/ 1.4oz |
| Dimension | 67x55x20mm |
, , , , , , Specifications:, , , , , , , , , , , Video input formats supported: 640*480@60Hz 800*600@60Hz 1280*1024@60Hz 1360*768@60Hz 1600*1200@60Hz 1920*1080@60Hz 480i@60Hz 480P@60Hz 576i@60Hz 576p@60Hz 720P50hz/60Hz 1080I/60Hz 1080P50hz/60Hz, , ,
Features: Convert HDMI signal to AV signal. Popular devices supported: ...HiModel
220V 1800W 2-SPEED HOT AIR GUN
| Power input | 220V AC |
| Wall plug type | U.S. standard |
| Power | 1800W |
, , , , , , Specifications:, , , , , , , , , , , Hot Air Gun, Two-speed, Temperature adjustable (turn the rear black cover to adjust the temperature), , ,
Includes/Requires: Includes:1 x hot air gun 1 x spare nozzle ...HiModel
RADIOLINK MINI HEAD LOCK GYRO GY100
| • Control system | Digital advanced PI (Proportional Integration) control |
| • Gyro sensor | SMM (Silicon Micro Machine) system vibration gyro |
| • Operating voltage | +4 to +6VDC |
| • Operating temperature range | -10°C to +45°C |
| • Dimensions | 21 x 12 x 25.5mm |
| • Weight | 9.7g (including connector) |
, , , , , , Specifications:, , , , , , , , , , , GY100 Ratings (Integrated sensor type AVCS rate gyro), • Functions:, Gyro operation direction switch, DS mode switch, Control sense trimmer, Limit trimmer, Remote gain control, AVCS/normal mode switching., LED indicator, , , Gyro state, , Fast twinkle, , Gyro is searching for the center point., , Constant bright, , Normal working state, , Black, , Power off, , Slow twinkle, , Gyro can't receive the rudder controlling signal, rudder servo can not work., , Intermittent twinkle, , The center point of transmitter has deviated, gyro should be restarted., , , ,
Features: The GY100 is a high performance, compact, light weight ...HiModel
FPV 420-LINE CAMERA 1/3 SONY CCD - NTSC FORMAT
| Sensor | 1/3 CCD Sony, 420 lines. |
| Video format | NTSC |
| Power Input | 12V ±5% |
| Shutter speed | automated 1/50-1/10000 sec |
| Minimum illuminance | 0.05Lux F2.0 |
| Dimension | 35 x 35 x 35mm (excluding mount) |
| Weight | 50.9g |
, , , , , , Specifications:, , , , , , , , , , , FPV 420-line Camera 1/3 Sony CCD - NTSC, Audio: No, Current consumption: , , ,
Includes/Requires: Includes:1 x camera 1 x wire 1 x instruction ...HiModel
FPV 520-LINE CAMERA 1/3 SONY CCD - PAL
| Sensor | 1/3 CCD Sony, 520 lines. |
| Video format | PAL |
| Power Input | 12V ±5% |
| Shutter speed | automated 1/50-1/10000 sec |
| Minimum illuminance | 0.05Lux F2.0 |
| Dimension | 35 x 35 x 35mm (excluding mount) |
| Weight | 50.9g |
, , , , , , Specifications:, , , , , , , , , , , FPV 520-line Camera 1/3 Sony CCD, Audio: No, Current consumption: , , ,
Includes/Requires: Includes:1 x camera 1 x wire 1 x instruction ...HiModel
FPV 520-LINE CAMERA 1/3 SONY CCD - NTSC
| Sensor | 1/3 CCD Sony, 520 lines. |
| Video format | NTSC |
| Power Input | 12V ±5% |
| Shutter speed | automated 1/50-1/10000 sec |
| Minimum illuminance | 0.05Lux F2.0 |
| Dimension | 35 x 35 x 35mm (excluding mount) |
| Weight | 50.9g |
, , , , , , Specifications:, , , , , , , , , , , FPV 520-line Camera 1/3 Sony CCD - NTSC, Audio: No, Current consumption: , , ,
Includes/Requires: Includes:1 x camera 1 x wire 1 x instruction ...HiModel
FPV 700-LINE CAMERA 1/3 SONY CCD - NTSC
| Imaging Device | 1/3" Sony 960H Exview HAD CCD II - NTSC |
| Effective Pixels | NTSC |
| Scanner System | NTSC |
| Minimum Illumination | 0.01LUX/F1.2 |
| Language | Chinese/English |
| Gain Control | Auto/MANUAL |
| White Balance | Auto/MANUAL |
| Backlight Compensation | BLC/HLC/OFF selectable |
| S/N Ratio | ≥48dB |
| Electronic Shutter | NTSC |
| Sync. System | Internal |
| Video Output | 1.0Vp-p/75Ω |
| Lens | 3.6mm |
| Power | DC12V±5% |
| working current | 70mA |
| Operation Tem | -20℃--60℃ |
, , , , , , Specifications:, , , , , , , , , , , Horizontal Resolution：700TVL, D/N Selection： Color/B/W/Auto, O.S.D Menu： Available, Noise Reduction： 2D-NR 0-15 level, Wiring guide:, Red- positive ("+"),, black - Negative ("-"),, Yellow - signal, , ,
Features: Special features: - Using latest SONY Effio-E chips, supports ...HiModel
FPV 700-LINE CAMERA 1/3 SONY CCD - PAL
| Imaging Device | 1/3" Sony 960H Exview HAD CCD II - PAL |
| Effective Pixels | PAL |
| Scanner System | PAL |
| Minimum Illumination | 0.01LUX/F1.2 |
| Language | Chinese/English |
| Gain Control | Auto/MANUAL |
| White Balance | Auto/MANUAL |
| Backlight Compensation | BLC/HLC/OFF selectable |
| S/N Ratio | ≥48dB |
| Electronic Shutter | PAL |
| Sync. System | Internal |
| Video Output | 1.0Vp-p/75Ω |
| Lens | 3.6mm |
| Power | DC12V±5% |
| working current | 70mA |
| Operation Tem | -20℃--60℃ |
| Camera dimension | 36(W)x 36(H) x 33.5(length)mm (excluding the camera mount) |
, , , , , , Specifications:, , , , , , , , , , , Horizontal Resolution：700TVL, D/N Selection： Color/B/W/Auto, O.S.D Menu： Available, Noise Reduction： 2D-NR 0-15 level, Wiring guide:, Red- positive ("+"),, black - Negative ("-"),, Yellow - signal, , ,
Features: Special features: - Using latest SONY Effio-E chips, supports ...1 Reviews
HiModel
8 INCH 800X600 RESOLUTION TFT LCD TV (AV+TV+VGA 3-IN-1)
| Power input | DC 12V/ 400mA |
| Screen size | 8 inch, 4 |
| TV video format | PAL + SECAM (this version does not support NTSC format) |
| Video input | 1Vp-p CVBS , one-AV channel, YPbPr+ three_AV channel input |
| VGA input | 640x 480 60hz/ 800x 600 60Hz/ 1024 x 768 60Hz |
| Screen resolution | 800x 600 |
| Visible area | 162（W）x 121.5（H）mm |
| Size | 192 x 182 x 27.3 mm |
| Weight | 450g |
, , , , , , Specifications:, , , , , , , , , , , Signal input:, * There are two different colors, Silver and Black, we will send in random based on the stock availability., * This monitor does NOT support NTSC TV format., * The manual supplied with the product may not match the specific type of this product, it happens that the manufacturer may use a general version manual for many different version products, so in this case, you may find there are many discrepancies on the manual, please disregard those discrepancies in this case., , ,
Features: - 8 inch TFT LCD panel, 800 x 600 ...1 Reviews
HiModel
5.8GHZ DIVERSITY RECEIVER 7 INCH 800X480 LCD MONITOR W/LIGHT SHIELD RC-701
| 2. Screen type | TFT LCD Screen/long life, LED backlight |
| 3. Resolution | 800*480 |
| 4. Brightness | 450cd/m2 |
| 5. Contrast | 500 |
| 6. View Angle | 140/120degree (Horizontal/Vertical) |
| 7. Working Voltage | DV 7-12V(center positive) or 11.1V Li-battery |
| 9. Size | 180mm x 120mm x 23mm |
| 13. Working temperature | -10℃~+ 65 ℃ |
| • CH1 | 5705MHz |
| • CH2 | 5685MHz |
| • CH3 | 5665MHz |
| • CH4 | 5645MHz |
| • CH5 | 5885MHz |
| • CH6 | 5905MHz |
| • CH7 | 5925MHz |
| • CH8 | 5945MHz |
, , , , , , Specifications:, , , , , , , , , , , Specification:, 1. Screen size:7”, 8. Power Consumption: , 10. Built-in 5.8Ghz Dual diversity receiver automatically for best reception, 11. Built-in 2CH 5.8Ghz AV output and 1CH AV input, 12. Support 9 languages menu selection, Working frequencies, , ,
Features: Features: 1. Built-in Dual Receiver Automatically for best reception ...