HiModel
5.8GHZ BUILT-IN RECEIVER 7 INCH 800X480 MONITOR W/LIGHT SHIELD
| 2. Screen type | TFT LCD Screen/long life, LED backlight |
| 3. Resolution | 800*480 |
| 4. Brightness | 450cd/m2 |
| 5. Contrast | 500 |
| 6. View Angle | 140/120degree (Horizontal/Vertical) |
| 7. Working Voltage | DV 7-13V(center positive) or 11.1V Li-battery |
| 9. Size | 170mm x 110mm x 40mm |
| 11. Input | 2 ways video including AV1 for built-in receiver, one way audio |
| 12 Output | 1 way |
| 14. Working temperature | -10℃~+ 65 ℃ |
| 15. Receiver antenna connector type | RP-SMA, jack (monitor side) |
| • CH1 | 5705MHz |
| • CH2 | 5685MHz |
| • CH3 | 5665MHz |
| • CH4 | 5645MHz |
| • CH5 | 5885MHz |
| • CH6 | 5905MHz |
| • CH7 | 5925MHz |
| • CH8 | 5945MHz |
, , , , , , Specifications:, , , , , , , , , , , Specification:, 1. Screen size:7”, 8. Power Consumption: , 10. Built-in 5.8Ghz receiver (RC305 5.8G), 13. Support 9 languages menu selection including English., See connector type diagram, Working frequencies (* Check your TX frequency to make sure they are supported by your TX), , ,
Features: Features: -Built-in 5.8G Receiver -None "blue screen" effect when ...1 Reviews
HiModel
220V 40W HIGH QUALITY SOLDERING IRON
| Work voltage | 220V |
| Rating power | 40W |
| Wall plug type | 2 square pins (U.S. standard) |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: From well-recognized quality manufacturer. Includes/Requires: Includes: 1 x 220V ...HiModel
12V 30W OUTDOOR WORK SOLDERING IRON
| Work voltage | 12V |
| Rating power | 30W |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: New series soldering technolog corrosion resistant tip. Includes/Requires: Includes: ...2 Reviews
HiModel
PROLUX 220V DIGITAL LCD SEALING IRON 1363
| Power input | 220V AC |
| Wall plug type | 2-round pins, European |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: DIGITAL LCD SEALING IRON 1. Providing precise digital temperature ...HiModel
MINI ELECTRIC TOOL PACK (DRILING, CUTTING, GRINDING, POLISHING)
| Power input | 100-240V AC power adaptor included (2-pin square plug) or 12V DC input |
, , , , , , Specifications:, , , , , , , , , , , Mini Electric Tool Pack (Driling, cutting, grinding, polishing), , ,
Includes/Requires: Includes:1 x tool bag 5 x high-speed steel drilling ...HiModel
FPV 5.8G 600MW A/V TRANSMITTER MODULE (TX) - GOLDEN EDITION | SMA, JACK
| video format supported | NTSC/PAL |
| Antenna connection | SMA, jack (TX module side) |
| Power input | 7.4-13V (3S Lipo suggested, does NOT support 4S Lipo) |
| Transmitting power | 600mA (working current 230mA @12V) |
| Weight | 52g/ 1.8oz |
| Dimension | 59x30x33 (excluding antenna) |
, , , , , , Specifications:, , , , , , , , , , , FPV 5.8G 600mW A/V Transmitter Module (TX) - Golden Edition, See connector type diagram, *Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty., , ,
Features: FPV 5.8G 600mW A/V Transmitting module, Golden edition. Special ...HiModel
FPV 5.8G 1000MW A/V TRANSMITTER MODULE (TX) | (SMA, JACK)
| video format supported | NTSC/PAL |
| Antenna connector | SMA jack (module side) |
| Power input | 7-15V (3S Lipo suggested, does NOT support 4S Lipo) |
| Transmitting current | 500mA (600mA at 12V under our real testing) |
| Dimension | 59x27x33 (excluding antenna) |
| Weight | 52.9g (with antenna) |
, , , , , , Specifications:, , , , , , , , , , , FPV 5.8G 1000mW A/V Transmitter Module (TX), Refer to here for connector type diagram, *Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty., , ,
Features: FPV 5.8G 1000mW A/V Transmitting module, a good choice ...1 Reviews
HiModel
CYCLOPS STORM OSD SYSTEM W/GPS | NEW V1.03 EDITION
| Power input | 3S Lipo |
| Weight | 68g |
| Current sensor | 30V, 100A |
| video format | auto detect PAL or NTSC |
, , , , , , Specifications:, , , , , , , , , , , CYCLOPS STORM OSD., , ,
Features: Cyclops Storm OSD, AHRS based OSD with RTL/RTH fucntion: ...7 Reviews
HiModel
FPV 2.4G 500MW A/V TRANSMITTER (TX)
| Transmitting unit weight | 34.5g |
| Power input | 12V ± 5% |
| Transmitting current | 200mA |
| Channel number | 8-ch |
| Transmitting distance (air to ground) | 1 to 2Km (for reference only, the distance may vary a lot depending on the environments) |
| Antenna gain | 3db |
| Video signal resistance | 75Ω |
| Antenna connection | SMA |
| CH1/CH5 | 2410/2370MHz |
| CH2/CH6 | 2430/2390MHz |
| CH3/CH7 | 2450/2490MHz |
| CH4/CH8 | 2470/2510MHz |
, , , , , , Specifications:, , , , , , , , , , , FOXTECH FPV 2.4G 500mW A/V Transmitter (TX), Working frequency:, , ,
Features: Includes/Requires: Includes: 1 x transmitter only * No instruction ...1 Reviews
HiModel
PARTOM 1.2G 800MW A/V TRANSMITTING/RECEIVING SYSTEM | SMA, JACK
| Transmitting unit weight | 78.5g/2.77oz |
| Transmitter channel number | 8-ch |
| Power input | 12V |
| Receiving current | 100mA |
| Transmitting current | 280mA |
| Receiver Channel number | 12-ch |
| Transmitting distance (air to ground) | 800-1500m (for reference only, the distance may vary a lot depending on the environments) |
| Transmitter unit Dimension | 45 x 53x 19mm |
| Video signal resistance | 75Ω |
| Antenna connection | SMA jack (modules side, both TX and RX) |
, , , , , , Specifications:, , , , , , , , , , , FPV 1.2G 800mW A/V system., Refer to here for connector type diagram, Working frequencies:, 0.910G 0.980G 1.010G 1.040G, 1.080G 1.120G 1.160G 1.200G, 1.240G 1.280G 1.320G 1.360G, ,
3 Reviews
HiModel
FPV 5.8G 200MW A/V TRANSMITTING/RECEIVING SYSTEM | RP-SMA, JACK
| Transmitting unit weight | 34.5g |
| Power input | 12V ± 5% |
| Receiving current | 100mA |
| Transmitting current | 100mA |
| Transmitter Channel number | 8-ch |
| Receiver channel number | 4-ch |
| Antenna gain | 3db |
| Video signal resistance | 75Ω |
| Antenna connection | RP-SMA jack (both TX/RX modules, module side) |
| CH1 | 5705 CH2 |
| CH3 | 5665 CH4 |
| CH5 | 5885 CH6 |
| CH7 | 5925 CH8 |
, , , , , , Specifications:, , , , , , , , , , , FPV 5.8G 200mW A/V Transmitting/receiving System, Refer to here for connector type diagram, Details of channel frequencies of the transmitter:, *Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty., , ,
Features: FPV 5.8G 200mW A/V Transmitting/receiving System, a good choice ...11 Reviews
HiModel
FPV 5.8G 200MW A/V TRANSMITTER (TX) | RP-SMA, JACK
| Transmitting unit weight | 34.5g |
| Power input | 12V ± 5% |
| Receiving current | 100mA |
| Transmitting current | 100mA |
| Transmitter Channel number | 8-ch |
| Antenna gain | 3db |
| Video signal resistance | 75Ω |
| Antenna connection | RP-SMA jack (module side) |
| CH1 | 5705 CH2 |
| CH3 | 5665 CH4 |
| CH5 | 5885 CH6 |
| CH7 | 5925 CH8 |
, , , , , , Specifications:, , , , , , , , , , , FPV 5.8G 200mW A/V Transmitting unit, Refer to here for connector type diagram, Details of channel frequencies of the transmitter:, , ,
Features: This is the A/V transmitting unit only, a good ...1 Reviews
HiModel
MAGIC MIRROR HELICOPTER OPTICAL TACHOMETER
| - RPM measurement range | 800 -4200RPM |
| - Accuracy | +/-1 RPM |
| - Power supply | CR2032/LIR2032 button battery |
| - Operating battery drain | 3mA |
| - Idle drain | 10uA |
| Inludes | 1 x Tachometer |
Features:, , Application:, - RPM main rotor measurement for all kinds of helicopters, Includes/Requires:, ,
- 4-digit LCD screen display - 10 Level aperture adjustment ...HiModel
GWS PG-03 PIEZO GYRO
| Size | 26*27*11.3mm |
| Weight | 7.0g（0.28oz） |
| Power Supply | 4.8V-6V |
| Current Draw | 10ma（4.8V） |
| Gain Adjustment | Single rate, non-remote |
| Operating Temperature | －5�～60�C |
| Applicable R/C System | FUTABA, JR, SANWA/Airtronics, HI-TEC, Multiplex, GWS etc. |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: The PG-03 has been designed using a new micro ...HiModel
ALUMINUM 450 CLASS 3D CCPM ELECTRIC HELICOPTER KIT TYPE GL450B
| ●Length | 650mm |
| ●Height | 230mm |
| ●Main Rotor | 680/700mm |
| ●Tail Rotor | 150mm |
| ●Weight(without power system) | 375g |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: Aluminum 450 Class 3D CCPM Electric Helicopter Kit ●All ...