GetFPV
TEAM BLACKSHEEP CORE
Installation is quick and easy: solder the TBS CORE between your camera and video transmitter. The PSU will provide a constant voltage along the full life of your batteries for both camera and transmitter. The redundant input power makes sure you have video signal even if your main battery is completely flat, so you can always locate and recover your plane. These units do NOT come with any cables. Optional current sensors available.,
Details Version 1.0 is shown in the picture, the current ...GetFPV
TEAM BLACKSHEEP CORE
Installation is quick and easy: solder the TBS CORE between your camera and video transmitter. The PSU will provide a constant voltage along the full life of your batteries for both camera and transmitter. The redundant input power makes sure you have video signal even if your main battery is completely flat, so you can always locate and recover your plane. These units do NOT come with any cables. Optional current sensors available.,
Details Version 1.0 is shown in the picture, the current ...GetFPV
EZUHF 4 CHANNEL RECEIVER
| Power Requirements | 4.8v - 6v, 33mA |
GetFPV
OSD PRO PKG WITH 100A ELOGGER/WIRE LEADS AND GPS
There are lots of OSD choices out there. Here are a few reasons why the OSD Pro may be your best option:, Modularity:, If we come out with a newer version of one of the OSD Pro components, you only need to upgrade that component to have the latest and greatest system, rather than having to replace your entire OSD system when a new one comes along., Easy setup:, The OSD Pro is easy to configure exactly like you want it, with the included software., Stabilization:, with the new Guardian Stabilization Expander, the OSD Pro provides full model stabilization with no additional stabilization equipment to buy., Expandability:, Eagle Tree offers myriad sensors that are fully compatible with the OSD Pro. Since we make these sensors ourselves, you're guaranteed that they will be plug and play, with no soldering, finger pointing, or headaches., Powerful features:, The OSD Pro offers advanced features, such as Voice Alerts, Programmable Alarms, "RADAR" synthetic map, "Return to Home", RSSI and multiple battery voltage displays, built-in Flight Simulator for setup testing,Artifical Horizon display, acoustic variometer, waypoints, full Data Logging with GoogleEarth and graphing with the powerful software., World class support:, Eagle Tree has a full time, dedicated support staff, should you ever have a problem. They offer 24/7 support with their, Easy upgradability:, We are constantly adding new features and enhancements to the firmware. These are just a download away. The OSD Pro's built-in USB connection makes it easy to update firmware with the powerful software. No need to buy a separate USB adapter, build any special cables, or other complex steps for update., Part of a complete FPV system:, The OSD Pro is complimented by our EagleEyesTM Ground Station, and will soon be enhanced with the, for more details):, High speed logging at up to 50Hz (increased from 10Hz).,
Details The OSD Pro is the ultimate on-screen display for ...GetFPV
8" LUMENIER LCD FPV MONITOR
| Image | 8" TFT LCD |
| Resolution | 800x480 |
| Horizontal frequency range | 30-60KHz |
| Field frequency range | 60-75Hz |
| Brightness | 450cd/m² |
| Viewing Angle | 70°/70°(L/R) 50°/70°U/D |
| Contrast Ratio | 500 |
| Response time | 15ms |
| Input Voltage | DC 6-16V (2s-4s compatible) |
| Power Consumption | ≦8W |
| Input Singal | RCA video and audio |
| Size | 209 x 147 x 35 mm |
| Weight | 620g with cables and sun shield |
| Mounting | Standard 1/4-20 tripod and VESA mounts |
Display Ratio: 16:9,
Details This FPV monitor is a medium sized 8" super ...GetFPV
10.1" LUMENIER LCD MONITOR - LED BACKLIT
| Image | 10.1" TFT LCD LED Backlit |
| Resolution | 1366x768 |
| Horizontal frequency range | 30-98KHz |
| Field frequency range | 60-75Hz |
| Brightness | 450cd/m² |
| Viewing Angle | 70°/70°(L/R) 40°/50°U/D |
| Contrast Ratio | 500 |
| Response time | 8ms |
| Input Voltage | DC 12V ~ 15% |
| Power Consumption | ≦10W |
| Input Singal | VGA,AV1,AV2,Audio,HDMI |
| Size | 255L×163W× 34D mm |
| Weight | 544g without cables or sun shield, 875g with cables and sun shield |
| Mounting | Standard 1/4-20 tripod and VESA mounts |
Display Ratio: 16:9,
Details This FPV monitor is a large 10.1" super bright ...GetFPV
5" LUMENIER LCD FPV MONITOR
| Image | 5" TFT LCD |
| Resolution | 800x480 |
| Horizontal frequency range | 30-60KHz |
| Field frequency range | 60-75Hz |
| Brightness | 450cd/m² |
| Viewing Angle | 70°/70°(L/R) 50°/70°U/D |
| Contrast Ratio | 500 |
| Response time | 10ms |
| Input Voltage | DC 6-16V (2s-4s compatible) |
| Power Consumption | ≦7W |
| Input Singal | RCA video and audio |
| Size | 146 × 100W ×46H |
| Weight | 350g with cables and sun shield |
| Mounting | Standard 1/4-20 tripod and VESA mounts |
Display Ratio: 16:9 or 4:3 selectable,
Details This FPV monitor is a small compact 5" super ...GetFPV
LUMENIER CU-690 ULTRA - 690TVL ULTRA WDR
| Power input | DC12V |
GetFPV
FATSHARK 5.8GHZ 250MW A/V TRANSMITTER
| Operating Frequencies | 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz |
| Weight | 14 grams |
| Size | 57 x 25mm |
| Input voltage range | 6 - 16 v |
Parameters:, 250mW output power, Content of the package:, 1 x 250mW Transmitter module,
Details he Fatshark 5.8Ghz 250mW transmitter is a state of ...GetFPV
TBS CORE PNP50
Installation is fool proof: Plug your battery into the JST / BEC connector and power all your plane's electronics from the other JST / BEC connector. The current sensor automatically measures the current passing through this cable. Plug in the VTx (5V default) and the camera (12V default).,
Details The TBS CORE PNP50 is a consequent progression to ...GetFPV
TBS CORE PNP25
Installation is fool proof: Plug your battery into the JST / BEC connector and power all your plane's electronics from the other JST / BEC connector. The current sensor automatically measures the current passing through this cable. Plug in the VTx (5V default) and the camera (12V default).,
Details The TBS CORE PNP25 is a consequent progression to ...GetFPV
3 CH RC VIDEO SWITCH
| All pin headers have same pin functions | GND, +V, Video |
Features:, , Connecting:, You can connect RC video switch to RC receiver’s regular servo channel or sum PPM connector. It will automatically detect type of RC signal., Configure PPM control channel:, To change PPM channel used to control video switch you need to toggle 8 times needed transmitter switch within 10s after video switch is powered ON., Video connectors:, SmartFPV video switch has 3 video inputs and 1 video output. Connection is made with common 3 pin servo style connectors., Video power:, All middle pins of 3 pin video connectors are interconnected to share same power between video cameras and video transmitter connected. You can power all devices either by feeding voltage to one of video devices connected or by soldering additional leads to battery input and connect battery. Battery connection leads are not included.,
Details SmartFPV 3 way RC video switch allows switching between ...GetFPV
QAV400 FPV QUADCOPTER FRAME (PRE-ORDER)
| Weight | 375g (without landing gear) |
| AUW | 1165g with 2200mah 4s nanotech lipo, gopro3, flight cam, TX, and CC3D board |
| Flight Time | 9 minutes hover with 2200mah 4s nanotech |
| Body | G10 |
| Booms | Anodized machined Aluminum |
| Suggested Props | Graupner 8" E-Props |
| Motor Choice | Tiger Motor |
Power: Like the QAV500, the QAV400 comes with a power distribution board to solder the ESCs to as well as FPV electronics to, Suggested Lipo: 4s 2200mah up to 3300mah. HobbyKing NanoTech Lipos in these sizes fit the frame well in terms of dimensions. Max Lipo Dimensions: W: 54mm, H: 35mm, L: 150mm, Suggested ESC:, Tiger Motor 18amp ESC,
Details The new QAV400 FPV Quadcopter is nimble acrobat that ...GetFPV
QAV400 FPV QUADCOPTER FRAME (PRE-ORDER)
| Weight | 375g (without landing gear) |
| AUW | 1165g with 2200mah 4s nanotech lipo, gopro3, flight cam, TX, and CC3D board |
| Flight Time | 9 minutes hover with 2200mah 4s nanotech |
| Body | G10 |
| Booms | Anodized machined Aluminum |
| Suggested Props | Graupner 8" E-Props |
| Motor Choice | Tiger Motor |
Power: Like the QAV500, the QAV400 comes with a power distribution board to solder the ESCs to as well as FPV electronics to, Suggested Lipo: 4s 2200mah up to 3300mah. HobbyKing NanoTech Lipos in these sizes fit the frame well in terms of dimensions. Max Lipo Dimensions: W: 54mm, H: 35mm, L: 150mm, Suggested ESC:, Tiger Motor 18amp ESC,
Details The new QAV400 FPV Quadcopter is nimble acrobat that ...GetFPV
QAV400 "DIRTY FRAME" PLATE
This is the 'dirty frame' plate for the QAV400 FPV Quadcopter Frame. It holds the motor arms and ESCs. This plate does not have any power soldering pads. Weight: 36 grams,
Details