HobbyKing
SCORPION HKII-2221-2010KV BRUSHLESS OUTRUNNER
| Stator Diameter | 22.0 mm(0.87 in) |
| Stator Thickness | 21.0 mm(0.83 in) |
| Motor Wind | 16 Turn Delta |
| Motor Wire | 10-Strand 0.21 mm |
| Motor Kv | 2010KV RPM/Volt |
| Motor Resistance (Rm) | 0.052 Ohms |
| Max Continuous Current | 28 Amps |
| Max Continuous Power | 590 Watts |
| Weight | 81 Grams (2.86 oz) |
| Outside Diameter | 27.9 mm (1.098 in) |
| Shaft Diameter | 3.175 mm (0.123 in) |
| Body Length | 38.3 mm (1.508 in) |
| Overall Shaft Length | 58.7 mm (2.289 in) |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
No. of Stator Arms:9, Magnet Poles:6, No-Load Current (Io):, 1.01 Amps @ 10 volts, Max Lipo Cell:6s,
Scorpion HK Series Brushless Motors are built from the best ...5 Reviews
HobbyKing
SCORPION SII-3026-710 BRUSHLES OUTRUNNER
| Stator Diameter | 30.0 mm (1.18 in) |
| Stator Thickness | 26 mm (1.02 in |
| Motor Wind | 10 Turn Delta |
| Motor Wire 16-Strand | 0.25mm |
| Motor Kv | 710 RPM / Volt |
| No-Load Current (IO/10V) | 1.56 Amps |
| Motor Resistance (Rm) | 0.022 Ohms |
| Max Continuous Current | 60 Amps |
| Max Continuous Power | 1000 Watts |
| Weight | 205 Grams (7.23 oz) |
| Outside Diameter | 37.50 mm (1.47 in) |
| Shaft Diameter | 4.98 mm (0.196 in) |
| Body Length | 51.75 mm (2.04 in) |
| Overall Shaft Length | 80.5 mm (3.17 in) |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
All Scorpion SII-30mm motors come with Scorpion's new 2.5mm male Bullet style connectors already attached, and include a complete hardware package that contains the following: 3 matching female Bullet connectors for your speed controller, a cross style backplate mount with 4 screws, and a threaded shaft prop adapter., No. of Stator Arms:12, Magnet Poles:14, Max Lipo Cell:5s,
Scorpion Competition Series Brushless Motors are built from the best ...1 Reviews
HobbyKing
SCORPION HKII-2221-12 BRUSHLESS OUTRUNNER
| Stator Diameter | 22.0 mm (0.87 in) |
| Stator Thickness | 21.0 mm (0.83 in) |
| Motor Wind | 12 Turn Delta |
| Motor Wire | 12-Strand 0.21mm |
| Motor Kv | 2580 RPM / Volt |
| Motor Resistance (Rm) | 0.038 Ohms |
| Max Continuous Current | 38 Amps |
| Max Continuous Power | 530 Watts |
| Weight | 81 Grams (2.86oz) |
| Outside Diameter | 27.9 mm (1.098 in) |
| Shaft Diameter | 3.17 mm (0.125 in) |
| Body Length | 38.3 mm (1.508 in) |
| Overall Shaft Length | 58.7 mm (2.311 in) |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
No. of Stator Arms:9, Magnet Poles:6, No-Load Current (Io):, 1.50 Amps @ 10 volts, Max Lipo Cell:4s,
Scorpion HK Series Brushless Motors are built from the best ...5 Reviews
HobbyKing
SCORPION SII-3020-780 BRUSHLESS OUTRUNNER MOTOR
| Stator Diameter | 30.0 mm (1.18 in) |
| Stator Thickness | 20 mm (0.79 in) |
| Motor Wind | 12 Turn Delta |
| Motor Wire | 17-Strand 0.25mm |
| Motor Kv | 780 RPM / Volt |
| No-Load Current (IO/10V) | 1.21 Amps |
| Motor Resistance (Rm) | 0.030 Ohms |
| Max Continuous Current | 40 Amps |
| Max Continuous Power | 800 Watts |
| Weight | 166 Grams (5.86 oz) |
| Outside Diameter | 37.50 mm (1.47 in) |
| Shaft Diameter | 4.98 mm (0.196 in) |
| Body Length | 45.75 mm (1.80 in) |
| Overall Shaft Length | 75.4 mm (2.93 in) |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
All Scorpion SII-30mm motors come with Scorpion's new 2.5mm male Bullet style connectors already attached, and include a complete hardware package that contains the following: 3 matching female Bullet connectors for your speed controller, a cross style backplate mount with 4 screws, and a threaded shaft prop adapter., No. of Stator Arms:12, Magnet Poles:14, Max Lipo Cell:6s,
Scorpion Competition Series Brushless Motors are built from the best ...5 Reviews
HobbyKing
SCORPION SII-3014-1040 BRUSHLESS OUTRUNNER MOTOR
| Stator Diameter | 30.0 mm (1.18 in) |
| Stator Thickness | 14.0 mm (0.55 in) |
| Motor Wind | 13 Turn Delta |
| Motor Wire | 11-Strand 0.25mm |
| Motor Kv | 1040 RPM / Volt |
| No-Load Current (IO/10V) | 1.35 Amps |
| Motor Resistance (Rm) | 0.026 Ohms |
| Max Continuous Current | 40 Amps |
| Max Continuous Power | 600 Watts |
| Weight | 129 Grams (4.55 oz) |
| Outside Diameter | 37.50 mm (1.47 in) |
| Shaft Diameter | 4.98 mm (0.196 in) |
| Body Length | 39.75 mm (1.56 in) |
| Overall Shaft Length | 68.5 mm (2.69 in) |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
All Scorpion SII-30mm motors come with Scorpion's new 2.5mm male Bullet style connectors already attached, and include a complete hardware package that contains the following: 3 matching female Bullet connectors for your speed controller, a cross style backplate mount with 4 screws, and a threaded shaft prop adapter., No. of Stator Arms:12, Magnet Poles:14, Max Lipo Cell:4s,
Scorpion Competition Series Brushless Motors are built from the best ...5 Reviews
HobbyKing
SCORPION HK-2221-8 BRUSHLESS OUTRUNNER
| Stator Diameter | 22.0 mm (0.87 in) |
| Stator Thickness | 21.0 mm (0.83 in) |
| Motor Wind | 8 Turn Delta |
| Motor Wire | 16-Strand 0.21mm |
| Motor Kv | 3595 RPM / Volt |
| Motor Resistance (Rm) | 0.024 Ohms |
| Max Continuous Current | 45 Amps |
| Max Continuous Power | 475 Watts |
| Weight | 81 Grams (2.86 oz) |
| Outside Diameter | 27.9 mm (1.098 in) |
| Shaft Diameter | 3.17 mm (0.125 in) |
| Body Length | 38.3 mm (1.508 in) |
| Overall Shaft Length | 58.7 mm (2.311 in) |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
No. of Stator Arms:9, Magnet Poles:6, No-Load Current (Io):, 2.31 Amps @ 10 volts, Max Lipo Cell:3s,
Scorpion HK Series Brushless Motors are built from the best ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 4000MAH 10S 45~90C LIPO PACK
: 4000mAh, : 10S1P / 10 Cell / 37V, : 45C Constant / 90C Burst, : 1169g (including wire, plug & case), : 305x54x36mm, : JST-XH, Discharge Plug:, 4mm bullet-connector, Suited to the following models:, MIKADO LOGO600/600SE, MA Furion 6,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
TURNIGY 8-15A UBEC FOR LIPOLY
| Output (Constant) | 5v/8A or 6v/8A |
| Input | 6v-12.6v (2-3cell lipo) |
| Size | 42x39x9mm |
| Weight | 34g |
| Quiescent current | 60mA |
| Full | 7.8~8.4v / 11.7v~12.6v |
Type: Switching, however because of the noise reduction (thin metal case & filter) this unit gives the same noise as a Linear BEC.,
Power your receiver and servos with the baddest of UBEC ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 4000MAH 5S 25~50C LIPO PACK
| 5S x 2 | MIKADO LOGO500SE/600/600SE, ALIGN T-REX600, Century Swift 620SE, Synergy E9 |
: 4000mAh, : 5S1P / 5 Cell / 18.5V, : 25C Constant / 50C Burst, : 525g (including wire, plug & case), : 161x49x33mm, : JST-XH, Discharge Plug:, 4mm bullet-connector, Suited to the following models:,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
BMS-660DMG+HS SUPER STRONG DIGITAL SERVO (MG) 14.2KG / .17SEC / 52G
| Weight | 52g / 1.84oz |
| Dimensions | 40.5 x 20 x 42mm / 1.60" x 0.78" x 1.62" |
| Torque At 6.0V | 14.2kg/cm , 190 oz/in |
| Speed At 6.0V | 0.17 sec / 60° at no load |
| Operating voltage | 4.8 - 6.0V |
5 Reviews
HobbyKing
H-KING 10A FIXED WING BRUSHLESS SPEED CONTROLLER
| Amp rating | 10A |
| Burst Rate (15sec) | 11A |
| BEC Current | 1A, 5V (Linear) |
| Voltage | (2-3 cell Lipo) |
| Dimensions | 23x18x8mm |
Weight:8g,
Designed for planes only, the H-KING escs are an excellent ...5 Reviews
HobbyKing
HOBBY KING BRUSHLESS CAR ESC 100A W/ REVERSE (UPGRADE VERSION)
| Cont. Current | 100A |
| BEC output | 3A /5.5V (switch) |
| Size( length X width X high) | 47x41x29mm |
| Weight | 95g |
Features:, Full protection feature including low voltage, over-heat, throttle signal lost, startup, Specification:, Input voltage:, 5V-17V (support 2-4S lithium batteries),
Hobby King upgrade version ESC provide more power support to ...5 Reviews
HobbyKing
HGD 250 CARBON GEAR DIGITAL BB - 18.12G / .12S / 2.5KG
| (Dynamic torque | 2.5Kg.cm,3.0Kg.cm) |
: 4.8V ~ 6.0V, :0.16s/60?0.12s/60?BR>, : 3.0Kg.cm,4.0Kg.cm, : 30.0 x 13.0 x 31.5, : 18.12g,
HGD Digital Carbonite Servo 18.12g Made in Korea, the HG ...5 Reviews
HobbyKing
TURNIGY 5A 1S BRUSHLESS ESC
| High rate adjustable switching (PWM | 8KHz/12KHz/16KHz) |
| BEC | Max 0.5A (switching) |
| Low Voltage Cutoff | 3.0v |
| Note | Programable with Turnigy monster programing card. |
| voltage | 3.0~4.2V |
| BEC | 5V/0.5A |
| Size | 25*13*5mm |
Features:, Microprocessor controlled, Cont. Current:3A, Burst Current:5A, Battery:, 1 Cell Lipo / 3 cell Nixx, Weight:2g,
Turnigy 5A-1S ESC a very small and light brushless speed ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 4500MAH 10S 25~50C LIPO PACK
: 4500mAh, : 10S1P / 10 Cell / 37V, : 25C Constant / 50C Burst, : 1157g (including wire, plug & case), : 305x53x36mm, : JST-XH, Discharge Plug:, 4mm bullet-connector, Suited to the following models:, MIKADO LOGO600/600SE, MA Furion 6, MA Furion 6, Joker 3,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews