SDSHobby
SKYBUS 2.4G EPO FOAM PLANE (WHITE) READY TO FLY LEFT HAND THROTTLE BRUSHLESS VERSION
| Material | EPO |
| Wing span | 1470mm |
| Total Length | 980mm |
| Wing area | 24.6d |
| Wing loading | 48.8g/ d |
| Flying weight | 1200g |
| Battery | 11.1V 2200mah 15C Lipo battery |
| Servo | 4 pcs* 9g |
| ESC | 30A*2 |
| Brushless outrunner motor | KV1100*2 |
| N.W.(KGS) | 4.2 |
| G.W.(KGS) | 4.8 |
| CTN SIZE (cm) | 98.5*50*61.5 (the carton size is for 3 pcs/ctn) |
Specifications:, Package contents:, Description:, This is DC-3 Skybus large scale EPO old style electric twin engine airplane from Dynam with 1470mm Wing span. The airplane has very nice Scale-Look and details. It has two preinstalled powerful brushless motor and 2-Blad Prop. All servos, Receiver and ESC are preinstalled from the Factory. The surface of the EPO material is extremely flat and rare. The complete model is made BY EPO which is very hard and the most crash-resistance material. The airplane is equipped with two powerful brushless motor and two 40 Amp ECS which give the model extra power and flight time. Its wide wingspan makes the model stable in the air with long glide-ratio. This model is suitable for intermediate to advanced pilots. The building time is around 45 min., Note:,
㎡ ㎡ .4g RC 4channel left Hand Throttle Charger, adapter ...SDSHobby
SEA PREDATOR 213 GASOLINE BOAT WITH 26CC ZENOAH ENGINE MADE IN CHINA
| Receiver Battery | Our item No. |
Specifications:, Hull Speed:, 60km/h, Hull Size:, 1280*480*225mm, Hull Material :, Fiberglass, G.W.:, 13.3 KG, Carton size:, 1450*560*340mm, Power:, 6CC Zenoah engine made in China(NOT Including clutch), Prop. :, 478B metal Prop, Drive System:, 6.35mm Joint, Flexible axle φ6.35mm, Drive dog φ6.35mm, Recommended Equipments (need to buy separately):, Remote Control:, CH-3CH radio, item No.:, FS-GT2, FS-GT3, FS-GT3B,
NOT Including Servo and Radio ControlSDSHobby
SECURITY ALARM
| Operate voltage | 4V-16.8V |
| Power consumption current | 0.92mA |
| Operate temperature | -20~ +85 Degree C |
| Dimension | 40mm x 20mm |
| Weight | 7 +- 1g |
Description:, Character:, a. Intelligent voltage detection,
b. Simple installation, operation. Operate with light signal indication. Recognize ...SDSHobby
SPRING RC ANALOG SERVO SM-S4312M 12.1KG/60G (DOUBLE BEARINGS) WITH METAL GEARS FOR FUTABA 25T SERVO ARM
| Size | 41.3x20.7x40mm / 1.63x0.81x1.57in |
| Weight | 60g/ 2.12oz |
| Torque | 10.3kg/cm at 4.8V, 12.1kg/cm at 6V |
| Speed | 0.21sec/60°at 4.8V, 0.18sec/60°at 6V |
| Gear Material | all metal gears |
| Servo Cable Length (mm) | 300 |
| Voltage | DC 4.8V-6V |
| Application Fields | electric car, gas car, powered boat, sailing vessel |
| Optional Servo Arm | 25T Futaba |
| General packing | PE bag |
| PE bag size | 120 x 85 x 0.07mm |
| Net Weight | 60g |
| Gross Weight | 77.1g |
| Packing | clamshell |
| Clamshell Size | 162.5 x 76mm |
| Net weight | 60g |
| Gross weight | 86.3g |
Specifications:, Bearing Qty.: 1, Rotation Angle:±, Features:, Packing Details:, Included Spare Parts:,
60° All metal gears Double ball bearings Or Servo x ...SDSHobby
TOUCH KEY BALANCE CHARGER V622A
| 11. Balance tolerance | ±0.01V |
| 1. Input voltage range | DC11 |
| . Charge current range | 0.1 |
| 3. Discharge current range | 0.1 |
| 4. Charge power limited | max.200W |
| 5. Discharge power limited | max.25W |
| 6. Balance current | max.300mA |
| 7. Balance tolerance | ±0.01V |
| 9. Lithium battery types | Li-Po, Li-lon, Li-Fe |
| 10. Lithium battery cell count | 1-6series |
| 11. Pb battery voltage | 2-24V |
| 12. Weight | 610g |
| 13. Dimensions | 175x150x67mm |
| 14. Trickle charging | 50-200Ma |
| Included | 1) JST plug |
Advantages:, 1. Intelligent operation, 12. Defective rate: 1‰, Specifications:, 8. Ni-Cd/Ni-MH battery cell count: 1,
. Charging will be accurate to 0.01V 3. Built-in balance ...SDSHobby
V-LEOPARD LBP4274-2.5Y KV2000 4 POLES INRUNNER BRUSHLESS MOTOR FOR RC CAR
| KV (RPM/V) | 2000 |
| Weight (g) | 374 |
| Max Power (W) | 2600 |
| Max Current(A) | 120 |
| Resistance (ohm) | 0.0062 |
| No-load Current(7.4V) | 1.7A |
| Li-Po Battery | 3-6S |
Specification:, , Motor Diameter (mm): 42, Motor Length (mm): 74, Extended Shaft Length (mm): 20, Extended Shaft Diameter (mm): 5, Banana Plug Diameter(mm): 4, Installation Hole Depth(mm): 7, Max Voltage(V): 25, Features:, , Recommended Equipments (need to buy separately):,
The whole efficiency can reach up to over 90%, and ...SDSHobby
VIDEO GOGGLE FPV
| 1.resolution ratio | VGA 640x480RGB;display pixel |
| .angle of view | 32o |
| 3.virtual photo size | 3.5m can show 80 inches photo |
| 5.antenna connector | SMA 50 ohm |
| 7.head tracking output | PPM singal |
| 8.adaptor power | 8-13V |
| 1.imaging device | high definition CMOS |
| .pixel | 720 X 480 |
| 3.level sharpness | 480 TV Line |
| 4.video output level | 1Vp-p/75ohm |
| 5.video format | PAL/NTSC |
| 6.visual angle | 90 o |
| 7.the lowest lighting | 1Lux/F1.2 |
SDSHobby
VIDEO GOGGLE KIT FOR FPV
| 1.resolution ratio | VGA 640x480RGB;display pixel |
| .angle of view | 32o |
| 3.virtual photo size | 3.5m can show 80 inches photo |
| 5.antenna connector | SMA 50 ohm |
| 7.head tracking output | PPM singal |
| 8.adaptor power | 8-13V |
| 1.imaging device | high definition CMOS |
| .pixel | 720 X 480 |
| 3.level sharpness | 480 TV Line |
| 4.video output level | 1Vp-p/75ohm |
| 5.video format | PAL/NTSC |
| 6.visual angle | 90 o |
| 7.the lowest lighting | 1Lux/F1.2 |
SDSHobby
VOLTS MONITOR TM (DC 3.7-20V LCD VOLTMETER)
Description:, Volts Monitor is great for monitoring battery power before flying., Character:, 1. 12 bits microchip IC design, reading voltage accurately.,
. Large LCD display shows battery voltage and 7-step capacity ...SDSHobby
CARBON FIBER PROPELLER 32*10 FOR 150CC GASOLINE AIRPLANE EXPEDITED SHIPPING ONLY
Specifications:, Material:, Carbon fiber, Size:, 32 x 10 inch, Aperture:¢, Net Weight:, 447g, Cylinder:, single cylinder, Engine Size:, 150CC, Engine Power:, Gasoline, RPM (revolutions per minute):, 5500~7000, Features:, Mold:, We imported the steels from Germany and Japan to make the mold., Centre Hub:, The centre hub is made of polyyoxymethylene resin, very strong and can not cause compressed cracks., Right and Left Edge:, Inside the propeller is carbon fiber silk, not hollow, the finish is a beautiful high gloss, clear epoxy gel-coat cover 3-storied 3K Black woven carbon fiber fabric., Balance:, Our propellers are CNC machined, and then hand finished to balance. All are factory balanced.,
10mmSDSHobby
CARBON FIBER PROPELLER 30*12 FOR 150-160CC GASOLINE AIRPLANE EXPEDITED SHIPPING ONLY
Specifications:, Material:, Carbon fiber, Size:, 30 x 12 inch, Aperture:¢, Net Weight:, 328g, Cylinder:, single cylinder, Engine Size:, 150-160CC, Engine Power:, Gasoline, RPM (revolutions per minute):, 5500~7000, Features:, Mold:, We imported the steels from Germany and Japan to make the mold., Centre Hub:, The centre hub is made of polyyoxymethylene resin, very strong and can not cause compressed cracks., Right and Left Edge:, Inside the propeller is carbon fiber silk, not hollow, the finish is a beautiful high gloss, clear epoxy gel-coat cover 3-storied 3K Black woven carbon fiber fabric., Balance:, Our propellers are CNC machined, and then hand finished to balance. All are factory balanced.,
10mmSDSHobby
CARBON FIBER PROPELLER 17*8 FOR 20CC GASOLINE AIRPLANE
| Net Weight | 116g |
Specifications:, Material:, Carbon fiber, Size:, 17 x 8 inch, Aperture:¢, Cylinder:, single cylinder, Engine Size:, 0CC, Engine Power:, Gasoline, RPM (revolutions per minute):, 6500~8000, Features:, Mold:, We imported the steels from Germany and Japan to make the mold., Centre Hub:, The centre hub is made of polyyoxymethylene resin, very strong and can not cause compressed cracks., Right and Left Edge:, Inside the propeller is carbon fiber silk, not hollow, the finish is a beautiful high gloss, clear epoxy gel-coat cover 3-storied 3K Black woven carbon fiber fabric., Balance:, Our propellers are CNC machined, and then hand finished to balance. All are factory balanced.,
8mmSDSHobby
CARBON FIBER PROPELLER 28*10 FOR 100-120CC GASOLINE AIRPLANE EXPEDITED SHIPPING ONLY
Specifications:, Material:, Carbon fiber, Size:, 8 x 10 inch, Aperture:¢, Net Weight:, 302g, Cylinder:, single cylinder, Engine Size:, 100-120CC, Engine Power:, Gasoline, RPM (revolutions per minute):, 5500~7000, Features:, Mold:, We imported the steels from Germany and Japan to make the mold., Centre Hub:, The centre hub is made of polyyoxymethylene resin, very strong and can not cause compressed cracks., Right and Left Edge:, Inside the propeller is carbon fiber silk, not hollow, the finish is a beautiful high gloss, clear epoxy gel-coat cover 3-storied 3K Black woven carbon fiber fabric., Balance:, Our propellers are CNC machined, and then hand finished to balance. All are factory balanced.,
10mmSDSHobby
CARBON FIBER PROPELLER 16*8 FOR 20CC GASOLINE AIRPLANE
Specifications:, Material:, Carbon fiber, Size:, 16x 8 inch, Aperture:¢, Net Weight:, 86g, Cylinder:, single cylinder, Engine Size:, , Engine Power:, Gasoline, RPM (revolutions per minute):, 6500~8000, Features:, Mold:, We imported the steels from Germany and Japan to make the mold., Centre Hub:, The centre hub is made of polyyoxymethylene resin, very strong and can not cause compressed cracks., Right and Left Edge:, Inside the propeller is carbon fiber silk, not hollow, the finish is a beautiful high gloss, clear epoxy gel-coat cover 3-storied 3K Black woven carbon fiber fabric., Balance:, Our propellers are CNC machined, and then hand finished to balance. All are factory balanced.,
8mm 0CCSDSHobby
CONVERSION COMBO KIT FOR 30-35CC GASOLINE AIRPLANE CONVERTED TO ELECTRIC AIRPLANE (3.5IN SPINNER)
| Motor | 6350 370KV Brushless motor 14 pole |
| Size | 63mm*50mm |
| MAX power | 2000W, 93A |
| Diameter of axle | 8mm |
| ESC | 100A (without UBEC output) 3-7S Lipo |
| Spinner | 3.5inch , 1pcs |
| Electric Prop | 20*8 inch |
| Servo | 60g* 3pcs, 9kg |
| Servo Arm | metal arm*5pcs |
| One Set Banana Bullet Connector | ¢3.5mm*3 pairs, ¢6mm*2pairs |
Application Fields:, Special made for 30-35CC gasoline airplane converted to electric airplane.,
Specifications : 6-7S Lipo 5g *2pcs, 4kg (for elevator) One ...