HobbyWireless
PETITE VERY HIGH RESOLUTION COLOR CAMERA 550 LINES NTSC SONY®
| - Power required | 10.5 - 13.5 Volts D.C. |
Details:, This is another great High Resolution CCD Color camera for FPV available in the market today.,
The Petite has the same tecnology as the SN555 but ...HobbyWireless
HORYZON HD 1080P CAMERA - V2
| Lens | 140 degree wide angle. |
| Sensor | 5.0 Megapixels CMOS |
| Weight | ~ 55g ( 2oz ) |
| Video resolution | -1920x1080 30fps |
| Photo resolution | 2592x1944 |
| Video formate | H.264 encoding, Mov |
| Audo | built-in Microphone |
| Memory | Support |
| Power supply | 4.2V DC(5-28V with V-REG) |
| Av out wire Pin definition | Black--GND |
Details:, , Your Purchase will include:, 1x HoryzonHD 1080P camera, Notes:,
HoryzonHD came to stay and make FPV better than ever! ...HobbyWireless
T1024 TRANSMITTER 2.4GHZ 1000MW - LAWMATE
| Weight | 30g (transmitter only) |
| Transmission power 50-ohm load CH1 Vcc = 12V | 30dBm |
| Nominal output impedance | 50 ohms |
| Operating voltage | Vcc, 10.5V (minimum), 12V (typical), 13V (maximum) |
| Supply current Vcc = 12V | 450mA (typical), 500mA (maximum) |
| Video input voltage 75-ohm impedance | 1Vp-p |
| Audio input voltage 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Storage humidity | 10 to 80% |
| Dimension and weight Excluding SMA connector | 50 x 26 x 13mm, 20g |
| to see the transmitter and camera connections. Note | BNC to RCA adpater is sold separately in accessories. |
Details:, This transmitter is a power house, providing a 1000 miliwatts of pre RF output., :, , Specifications:, , Standard shipping package:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
It has eight (8) selectable channels and it is the ...HobbyWireless
HIGH EFFICIENCY HIGH PROFILE HEAT SINK FOR TRANSMITTERS
| Outline | 23.00mm x 23.00mm |
| Height | 0.709" (18mm) |
| Material | Aluminum |
| Power Dissipation @ Temperature Rise | 2W @ 50°C |
| Attachment Method | Thermal Tape, Adhesive (Included) |
Details:, This heatsink is capable to dissipate lots of heat., Specs:, ,
It's highly recommended for small high-powered transmitters. It has self-stick ...HobbyWireless
GAUI 500X QUAD FLYER COMBO (MOTORS, ESC, BAG, NO GU-344)
| (v) Battery | type (LiPo) qty. (1) |
| Dimension | (64)cm x (17)cm x (13.5)cm |
| Dimension | (?)cm x (?)cm x (?)cm |
Details:, 500X was designed based on UAV, advantages are:, , 1. Flight Efficiency: Standard Battery (2S2000mAh) time of flight for more than 12min, with a high-capacity battery, the flight time will be 20 min or more (available spreadsheet calculation), 2. Excellent wind resistance: the efficiency and load of propeller are perfectly optimized, so the wind resistance will be better than general electric aircraft, 3. High stability: When using GU-344 (three-axis stabilizing system) for the beginner or professional in combination with other electronics for FPV flying; making the GAUI Quad Flyer a very stable vehicle., 4. Additional payload capabilities: Maximum Flying Weight is between 1100g to 2200g depending on power system used (330X GAUI Motors/ESCs or 500X GAUI Motors/ESCs), you can install cameras and video recorder, and other system., Note:, For users who have transplanted GAUI 330X / 330X-S power systems (motors, ESCs) to the 500X Upgrade kit, please use 8 inch propellers., Powered by:, , Product packing:, , Export Carton (LNK):, , Manual:,
5. Operation mode and flight characteristics are similar to helicopter, ...HobbyWireless
DJI WKM + S800 COMBO
| Features | 1. High Stability |
| 1. Diagonal axis length | 800 mm |
| 2. Takeoff Weight | 6 kg |
| 3. Load Weight | 2 kg |
| Built-In Functions | Autopilot, Auto Hover Fail Safe |
| Multi Rotor Types | Quad-Rotor, Hex-Rotor, Octo-Rotor |
| Supported ESC output | 200Hz refresh frequencys |
| Recommended Transmitter | PCM or 2.4GHz with minimum 5 channels and Failsafe function available on all channels |
| Recommended Power Supply | DC 4.8 ~ 12V |
| Power Consumption | MAX 5W (0.9A@5V, 0.7A@5.8V,0.5A@7.4V,0.4A@8V) |
| Hovering Accuracy | Vertical |
| Suitable Wind Condition | < 8m/s (17.7mph) |
| Max Rotate Angle | 30° |
| Vertical Speed | 3m/s |
| Total Weight | <= 150g |
| Dimensions | Main Controller |
| IMU | 40mm x 31mm x 26mm |
| GPS & Compass | 50mm (diameter) x 9mm |
| LED Indicator | 25mm x 25mm x 7mm |
Details:, , S800 Package Includes:, Arm (ESC 2-6S 40A; Motor 4114 kv320) x 6 pcs, Technical Specs:, Features:, , Operating Temperature: -5°C to +60°C (You have to keep the IMU warm if you want to use it under low temperature, could be -5°Cor lower.),
The "SPREADING WINGS S800" is DJI's latest "Hex-Rotor" platform. The ...HobbyWireless
WAYPOINT 2215-22 TURN, 914KV,56G BRUSHLESS MOTOR
Details:, PRODUCT DESCRIPTION:, New! High-Performance, High-Value Brushless Outrunner Motors - E2215 Series from Waypoint - with CNC VECTOR Cooling Fan, Note: Power handling capacity of any prop-saver system depends on the rpm and size of the prop, and on the amount of vibration allowed by the motor mount. The Waypoint Prop-Saver Adapter and its special O-Ring is one of the best on the market. However, we suggest a cautious limit of 90W maximum when using the prop saver. Be sure to inspect the condition of the O-Ring before each flight. When worn or damaged, replace o-ring from spare parts set #W-E22PSRING. E2205, E2208, and E2212 Series motors all come with Prop Saver Adapter and O-Ring included. E2215 Series do not include the Prop-Saver Adapter, as they are generally intended for 120W minimum input power. All motors include Mounting Screws, and quality 3.5mm Gold Connectors pre-soldered to the motor, and also 3 female connectors and heat shrink included for ESC side,
The Waypoint E22 Series represent a leap forward in powerful, ...HobbyWireless
R5800X 5.8 GHZ POCKET SIZE HIGH SENSITIVITY RECEIVER - NEW VERSION
| Note | to use any other antenna besides the original an |
| - 8 Selectable channels | DIP switches |
| - Working Frequencies | CH1 |
| - Working voltage | 8-12 VDC (runs cooler with 8V) |
| - Receiving sensitivity | < -90dBm |
| - Receiving frequency | ISM 5.8GHz 8CH |
| - Antenna port | 50ohm SMA |
| - Antenna | Gain |
| - Power supply | DC12V 220mA |
| - Video output level | 1Vp-p @ 75ohm |
| - Audio output level | 1Vp-p @ 10Kohm |
| - Dimensions | 72.5x54.2x15.5mm |
| - Current consumption | 120mAh |
| - Dimensions | 13 x 52 x 60 mm (0.4" x 2" x 2.5" inches). |
| Note | This receiver is compatible with |
Details:, This receiver is a perfect match for TX-V582 and TX-V585 transmitter, also it's the same receiver that comes with the FPV582 and FPV585 plug and play combos. It's not compatible with ImmersionRC transmitters.,
Don't be fooled by the size, this mini pocket size ...HobbyWireless
R5800DX DUO 5.8 GHZ DIVERSITY RECEIVER - 2 IN1 FOR DOUBLE RECEPTION
| - 8 Selectable channels | DIP switches (4 switches for each built-in receiver) |
| - Working Frequencies | CH1 |
| - Working voltage | 8-12 VDC (runs cooler with 8V) |
| - Receiving sensitivity | < -90dBm |
| - Receiving frequency | ISM 5.8GHz 8CH |
| - Antenna port | 50ohm SMA |
| - Antenna | Gain |
| - Power supply | DC12V 220mA |
| - Video output level | 1Vp-p @ 75ohm |
| - Audio output level | 1Vp-p @ 10Kohm |
| - Dimensions | 76 x 64 x 18 mm |
| - Current consumption | 120mAh |
| Receiver 1 Channel setup | DIP switches 1 2 3 |
| Receiver 2 Channel setup | DIP switches 4 5 6 |
Details:, The R5800DX Duo receiver was developed not only improve the reception quality and range but also to have better coverage., Note:, If your transmitter was purchased before October 2012 it may no be compatible with the R5800DX Duo Diversity Receiver.,
Another great advantage of this receiver is to be able ...HobbyWireless
WAYPOINT 2212-22 TURN, 1072KV,50G BRUSHLESS MOTOR
Details:, Description:, New! High-Performance, High-Value Brushless Outrunner Motors - E2212 Series from Waypoint - with CNC VECTOR Cooling Fan, Note: Power handling capacity of any prop-saver system depends on the rpm and size of the prop, and on the amount of vibration allowed by the motor mount. The Waypoint Prop-Saver Adapter and its special O-Ring is one of the best on the market. However, we suggest a cautious limit of 90W maximum when using the prop saver. Be sure to inspect the condition of the O-Ring before each flight. When worn or damaged, replace o-ring from spare parts set #W-E22PSRING.,
! The Waypoint E22 Series represent a leap forward in ...HobbyWireless
WAYPOINT 2205-32 TURN, 1970KV,28G BRUSHLESS MOTOR
Details:, , PRODUCT DESCRIPTION:, , Note: Power handling capacity of any prop-saver system depends on the rpm and size of the prop, and on the amount of vibration allowed by the motor mount. The Waypoint Prop-Saver Adapter and its special O-Ring is one of the best on the market. However, we suggest a cautious limit of 90W maximum when using the prop saver. Be sure to inspect the condition of the O-Ring before each flight. When worn or damaged, replace o-ring from spare parts set #W-E22PSRING. E2205, E2208, and E2212 Series motors all come with Prop Saver Adapter and O-Ring included. E2215 Series do not include the Prop-Saver Adapter, as they are generally intended for 120W minimum input power. All motors include Mounting Screws, and quality 3.5mm Gold Connectors pre-soldered to the motor, and also 3 female connectors and heat shrink included for ESC side.,
New! High-Performance, High-Value Brushless Outrunner Motors - E2205 Series from ...HobbyWireless
CASTLE CREATIONS THUNDERBIRD 54 BRUSHLESS SPEED CONTROL
| * Battery Eliminator Circuit (BEC) | eliminates receiver battery |
| * Low torque "Soft Start" | protects gear boxes and belt drives from shock |
| * Simple setup | no complicated switches or wiring |
| * Self-calibrating endpoints | maximizes usable stick travel |
| * Max volts | 15 volts 3S Lipo 10 NiCad/NiMh |
| * BEC | Linear regulator 3 amp max |
| * Length | 2" (50mm) |
| * Width | 1.15" (28.25mm) |
| * Height | 0.4" (10.5mm) |
| * Weight | 1.2 (34g) |
| * Brake | On/Off |
Details:, , Description:, The Thunderbird-54 offers tons of power at an unbelieveable price. You simply won't find this much controller for a better price, certainly not in the import bin! This controller is super for great aerobats such as the Multiplex Acromaster or for smaller powered gliders., Specs:, , * Max amps: 54,
* Safe "Power On" * Tough surface mount construction * ...HobbyWireless
TX-V584 5.8 GHZ 400MW PLUG & PLAYTRANSMITTER & WIRES - NEW VERSION
| - Output Power | 400mW |
| - Working voltage | DC 7.2 - 12v (9 - 12v performs better) |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Current consumption | ~280mAh |
| - Dimensions | 14 x 26 x 39 mm (0.45" x 1" x 1.5" inches). |
Details:, This is another great option to those whom want to do FPV without interference problems with 2.4 GHz R/C radios., Note:, to use any other antenna besides the original an, Transmitter features:, , Includes:, - TX-V584 5.8 GHz 400mw transmitter., Note:, No license is required to purchase it, however i, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
The 400mW 5.8 GHz transmitter and receiver are capable to ...HobbyWireless
FPV584 PLUG AND PLAY 5.8 GHZ 400MW WIRELESS SYSTEM - NEW VERSION
| - Working voltage | DC 7.2 - 12v (9 - 12v performs better) |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Current consumption | ~280mA |
| - Dimensions | 14 x 26 x 39 mm (0.45" x 1" x 1.5" inches). |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Working voltage | 8-12 VDC (runs cooler with 8V) |
| - Current consumption | 120mAh |
| - Dimensions | 13 x 52 x 60 mm (0.4" x 2" x 2.5" inches). |
Details:, Don't let the low cost for the system fool you. It can out perform many of more expensive systems sold out there., Transmitter's features:, - Output Power：400mW, Receiver's features:, - R5800 Dual (2x) Audio and Video outputs., Includes:-, Note:, No license is required to purchase it, however in order to legally operate within USA an, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This another great option to those whom want to do ...HobbyWireless
FPV582 PLUG AND PLAY 5.8 GHZ 200MW WIRELESS SYSTEM - NEW VERSION
| - Working voltage | DC 7.2 - 12v (9 - 12v performs better) |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Current consumption | 180mAh |
| - Dimensions | 14 x 26 x 39 mm (0.45" x 1" x 1.5" inches). |
| Receiver's features | - Dual (2x) |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Working voltage | 8-12 VDC (runs cooler with 8V) |
| - Current consumption | 120mAh |
| - Dimensions | 13 x 52 x 60 mm (0.4" x 2" x 2.5" inches). |
Details:, Don't let the low cost for the system fool you. It can out perform many of more expensive systems sold out there., Transmitter's features:, - Output Power：23dBm, Includes:-, Note:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This another great option to those whom want to do ...