GetFPV
XOAR PJN 11X6 MATCHED PAIR
Pre-drilled shaft diameter | 6mm |
GetFPV
IMMERSIONRC DUO 5800 V2 A/V DIVERSITY RECEIVER
Frequencies | 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz |
GetFPV
IMMERSIONRC EZUHF RECEIVER, 8 CHANNEL 'LITE'
EzLink connection to a EzOSD, providing in-flight display, and telemetry down-linked parameters | RSSI |
GetFPV
IMMERSIONRC POWERBOX
,
Details The PowerBox simplifies the cable mess, and provides clean, ...GetFPV
TIGER MOTOR MT-4006-13 740KV
,
Details The Tiger T-Motor MT-4006-13 740kv multi rotor motor is ...GetFPV
QAV540G BRUSHLESS GIMBAL AIRFRAME (PRE-ORDER)
Props | 11" props such as |
Motors | We recommend the |
ESCs | We recommend the |
Landing Gear:, You can choose between the, Gimbal Control Board:, We recommend the AlexMos board., Lipo:, A 5000mah 4s Lipo that is no wider than 51mm and no higher than 35mm (or it will not fit in the lipo compartment). We recommend HobbyKing Nano-Tech Lipos., GoPro Lens Protection:, The QAV540G gimbal requires the GoPro to be placed into the gimbal without the GoPro case. We recommend a separate, Shipping details:, When placing a pre-order, the entire order you place will be put on hold until the pre-ordered item is in stock and ready to ship. Please make a separate order for any additional items outside of the pre-order if you would like them to ship sooner, otherwise they will ship with your pre-order.,
Details The QAV540G is a high quality quad airframe that ...GetFPV
FATSHARK PREDATOR V2 VIDEO GLASSES W/TRANSMITTER AND CAMERA
,
Details The Predator V2 delivers a rewarding FPV experience for ...GetFPV
EAGLEEYES FPV STATION WITH CASE
, for live PC display of telemetry and firmware update. Note | A standard USB "Mini-B" cable is required for these features, but not included. |
integrates four of the main components you need for model airplane FPV on the ground, at a cost that's lower than many of the individual components presently available! New: now includes clear plastic case with removable top, and mounts for the PowerPanel LCD display., FPV Station provides all of the following features:, Receiver Diversity, Here are the specifications:, Two video inputs,
Details The EagleEyes TM FPV Station The new EagleEyes TM ...GetFPV
AIRSPEED MICROSENSOR V3
Circuit Board | Weight approx 4 grams (0.15 oz), dimensions 28 mm x 16 mm x 10 mm (1.1” x 0.62” x 0.4”) |
GetFPV
DJI NAZA M V2 MULTI-ROTOR STABILIZATION CONTROLLER AND GPS/COMPASS
Motor Disarm | There are two modes of Motor Disarm |
VU Input | 7.4V ~ 26.0 V |
Output(V-SEN port red wire) | 3A@5V |
(burst current | 7.5A) |
MAX | 3.15W(0.25A@12.6V) |
Normal | 1.638W(0.13A@12.6V) |
Vertical | ±0.8m |
Horizontal | ±2.5m |
PMU | 28g |
GPS | 27g |
LED | 13g |
PMU | 39.5mm x 27.5mm x 10.0mm |
LED | 25mm x 25mm x 7.0mm |
Note | Flight Performance can be effected by mechanical performance and payloads |
It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2):, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,
Details What's new with the NAZAM V2 Hardware PMU V2 ...GetFPV
1.3GHZ RECEIVER - 9 CHANNELS
Channel 4 | 1080MHz |
Channel 5 | 1120MHz |
Channel 6 | 1160MHz |
Channel 7 | 1200MHz |
Channel 8 | 1240MHz |
Channel 9 | 1280MHz |
Channel H | 1320MHz |
Channel C | 1360MHz |
Channel d | 1258MHz |
GetFPV
DJI NAZA M V2 MULTI-ROTOR STABILIZATION CONTROLLER
Motor Disarm | There are two modes of Motor Disarm |
VU Input | 7.4V ~ 26.0 V |
Output(V-SEN port red wire) | 3A@5V |
(burst current | 7.5A) |
MAX | 3.15W(0.25A@12.6V) |
Normal | 1.638W(0.13A@12.6V) |
Vertical | ±0.8m |
Horizontal | ±2.5m |
PMU | 28g |
GPS | 27g |
LED | 13g |
PMU | 39.5mm x 27.5mm x 10.0mm |
LED | 25mm x 25mm x 7.0mm |
Notice | Flight Performance can be effected by mechanical performance and payloads |
Features:, All-in-one Design, It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2):, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,
Details New with the V2 - New case design with ...GetFPV
FATSHARK 600TVL CMOS PAN/TILT CAM
Imager | 1/3" |
Lens | 3.6mm |
Operating Voltage | 3.5~5VDC |
Operating Current | 60mA @5V |
Weight | 33g |
Specs:, Servos:, 9g 180 degree smooth action,
Details Performance that rivals CCD at a fraction of the ...GetFPV
M.I.G. EXTERNAL HEAD TRACKER V5
,
Details The M.I.G. (Magnetic, Inertial, Gyro) head tracker is an ...GetFPV
DJI ZENMUSE H3-2D CAMERA GIMBAL FOR GOPRO 3
•Static Current | 400mA (@12V) |
• Dynamic Current | 600mA (@12V) |
Tilt axis | ±130°/s |
Roll axis | ±30°/s |
Tilt axis control | -130~+50° |
Roll axis control | ±39° |