Flying-Hobby
FPV SYSTEM 2.4G 1000MW AV TX/RX SET (SUPER VERSION)
| Input Voltage | 12V(3S LI PO ) |
| Working Frequency | 2.4G |
| Channel | 8Ch, AV synchronization |
| Output Power | 1500mW |
| Transmission distance (Open Space) | 1000M~2000M |
| Dimension TX | 45x30x10mm |
| Weight | 22g |
Specification of Tx:, Package included:, 12 CH Receiver x 1,
(8 km if you used with Directional Panel Antenna ) ...Flying-Hobby
PHOENIX ICE2 80A HV BRUSHLESS ESC
| ●Surge current | 80Amps |
| ●Supporting motor types | 2 poles to 10+poles in/outrunner brushless motors |
| ●Max Supporting input voltage | 50v(12s Li-Po/36 cells Nicad/NiMH) |
| ●Size | 71.12X33X22.9mm |
| ●Weight | 107.7g(With wires) |
| NOTE | Not including BEC. User need to provide the power for receiver and servo. |
Instructions:, Fearture:, ●Ready to fly out of the bag, but users can tap into serious computing capabilities by connecting them to Castle Link software using a Castle Link or upcoming Field Link programming card., Specification:,
●Comprehensive heli feature set, including direct entry governor mode, autorotation ...Flying-Hobby
AR6110 DSM2 MICROLITE 6-CHANNEL RECEIVER, AIR
| Type | Microlite Park Flyer Receiver |
| Modulation | DSM2 |
| Band | 2.4GHz |
| Dimensions (WxLxH) | 18.85 x 25 x 11.6mm |
| Weight | 3.35 g |
| Voltage Range | Input |
Key Features:, , Overview:, Spektrum? 2.4GHz DSM2 technology gets even smaller with the AR6110 6-channel DSM2 Microlite Park Flyer Receiver. The AR6110 weighs less than 3.5 grams making it the lightest 6-channel conventional plug aircraft receiver on the market. Antenna locations give the AR6110 improved signal path diversity. The receiver also features a red LED (labeled with H) that indicates the number of holds that have occurred since the receiver was last powered on. The AR6110 is compatible with all aircraft DSM2 radios and module systems. It is designed for park flyer use only., Specs:, , # of Channels:6,
6-channel park flyer receiver QuickConnect?with Brownout Detection Vertical Pin configuration ...Flying-Hobby
ROTOR TECH 115MM CARBON FIBER TAIL BLADES
| Length | 115mm |
| Width | 30mm |
| Grip | >=5mm |
| Hole | 3mm |
| Common Application | 90 size and gas-powered RC helicopters |
Specification:,
Flying-Hobby
MIKADO LOGO 600 3D ELECTRIC HELICOPTER KIT - FBL OPTIONS
| Specifications | - Motor mount |
| - Rotor diameter | 1250mm to 1450mm |
| - Rotor blades | 600/620/650mm |
| - Main gear ratio | 8,1 |
| - Weight | 3,2 kg and up |
| - Battery | 6S to 10S LiPoly |
| pinion | MIK4412 12 tooth |
| Cyclic servos | FutabaBLS 451 or JR 8717 or BLS 253 |
| Tail Servo | Futaba BLS 251 or JR 8900G |
| ESC | Kontronics Jive80HV or Casle Creations Ice 80 HV |
| Battery | 10cell 5000MAH |
Super light, extremely rigid mainframe:, The mainframe consists of a right and a left frame made from glassfiber-reinforced polymer. A number of components which are usually separate parts are fully integrated into this frame, and do not have to be bought separately, for example bearing case, battery tray and servo mounting plate. There is ample space for any brand of available battery. The mainframe offers enough room for motors of up to 56 mm in diameter., Herringbone main gear:, Experience of previous years shows that conventional gear trains have reached their limit with regard to performance. The increasing power made available by latest Lipoly batteries calls for new concepts. We are proud to present this new gear technology, which includes herringbone gears. This type of gear has never before been used in a model helicopter., Its main advantages are:, - Considerably more transmission efficiency - Very smooth running - Extremely low noise level, Suggested Kit Combination:, , motor:, Scorpion HK-4035-560, Note:, Mikado LOGO kits do not come with a pinion, tail blades, or main blades. You must choose your own pinion that matches your motor to obtain the headspeed that you desire. Please use our headspeed calculator if you need help figuring out what pinion you need!,
This is the Logo 600 V-Bar Flybarless version kit. We’ve ...Flying-Hobby
FUTABA CIU-2 PC INTERFACE FOR GY520 MC850 601C 401CR
| Interface | USB Rev1.1 compliant |
| USB Connector | USB series A connector |
| Operating Voltage | 5V ± .2V (USB bus power) |
| Current Drain | At connection idle; 12.3 ± 2mA |
| Operating Environment | Temperature -10 ~ 50°C |
| Dimensions | .72 x 2.22 x .35" (18.2 X 56.5 X 9mm) |
| Weight | .26oz (7.5g) |
| Applicable OS | Windows Vista/XP/2000 |
Flying-Hobby
SCORPION COMMANDER V 50V 130A ESC (SBEC)
| LVC= LOW VOLTAGE CUT | 120(12V) TO 480(48V). |
| AIR= 1 | Activate Airplane mode, 2 |
| SS= 1 | SOFT START WITH OUT GOVERNOR MODE*, 2 |
| GOV (P Gain) = POWER GAIN | 1 to 11 (SOFT to HARD), DEFAULT |
| SB (I Gain) = CURRENT GAIN | 1 to 8 (INSENSITIVE to SENSITIVE), DEFAULT |
| SOFT START DURATIO | 1. SHORT 10 Seconds, 2 |
BRK= BRAKE SETTING: 1: NO BRAKE, * 2: VERY SOFT BRAKE, 3: SOFT BRAKE, 4: HARD BRAKE, 5: VERY HARD BRAKE, PCT= PROGRAM CUT TYPE (LVC TYPE): 1: CUT 50%*, 2: NO CUT JUST LED WARNING, 3: PULSE WARNING, MAT= MOTOR ACCELERATION TIME DELAY: 1: 0.15 Seconds* (recommend for AIR 2), 2: 0.3 Seconds, 3: 0.45 Seconds, 4: 0.7 Seconds, 5: 1.3 Seconds, COP= CURRENT OVERLOAD PROTECTION: 1: PROTECTION ON*, 2: PROTECTION OFF (CHOOSING OPTION 2 WILL VOID WARRANTY), FREQ= DRIVE FREQUENCY: 1: 8 kHz *, TIM= MOTOR TIMING: 1: AUTO TIMING*, 2: 5 Degrees (Recommend for GOV 1), 3: 15 Degrees, 4: 20 Degrees, 5: 25 Degrees, 6: 30 Degrees,
Scorpion Commander V 50V 130A ESC (SBEC) This fifth generation ...Flying-Hobby
HIGH QUALITY CARBON FIBER MAIN BLADES (810MM)
| Length | 810mm |
| Width | 65mm |
| Weight | 410-420g |
| Grip | 14mm |
| Hole | 5mm |
| Airfoil | semisymmetrical |
| Tip | 4 dergee cathedral Angled |
| Make | Carbon Fiber |
| Common Application | Large Gas Powered RC Helicopters |
Flying-Hobby
ROTORTECH "LUMINOUS" V2 690MM CF BLADES - STANDARD
| Length | 690mm |
| Width | 61.5mm |
| Weight | 168-203g |
| Root / Grip Thickness | >=12mm |
| Hole | 4-5mm |
| Airfoil | Symmetrical |
| Tip | Aeroflat |
| Make | Carbon Fiber |
| Common Application | 60-90, Gas powered R/C helicopters. |
Specifications:, Features:, Removeable / Replaceable power pack (sold separately)., Includes:, 1x 3D/holographic decal sheet,
Auto on/off Different Top and Bottom Light Pattern Long flight ...Flying-Hobby
SKYRC COMPACT CHARGER E3S
| Power On | Orange (1 Second) |
| Stand By | Green |
| Charging | Red |
| Full | Green |
| Fault | Red Flashing |
| Specification | Size |
| weight | 100g |
| Cell | 2-3cells |
| Power Supply Buildin already | 110-240V AC |
| Max current | 3 x 800mA |
Introduction:, Charger LED status:,
Flying-Hobby
CO PILOT II SYSTEM COMBO 2
| Part Number | CPII-C2 |
| CPII Computer Module | 0.61 oz (19gm) |
| CPII Main Sensor | 0.23 oz (7gm) |
| CPII Vertical Sensor | 0.16 oz (5gm) |
| IRNet Router | 0.26 oz (8gm) |
Having trouble deciding which system to buy? Read the following:, CPII-C1 is the basic system. All features are similar to the other combo's, but without the vertical sensor, automatic temperature calibration is not available. Calibration is simple to do and without the vertical sensor installed, the menu system will automatically include another option for calibration. Calibration should be performed 1 time per flying day, or whenever the weather conditions change drastically. Also, without the vertical sensor installed, the aircraft is likely to recover from inverted flight using a split-S maneuver (half of an outside loop) which, if the aircraft is not at high enough altitude can result in contact with the ground. The vertical sensor, when installed, always forces Co Pilot II to roll the aircraft from inverted flight with little loss of altitude. Finally, without the vertical sensor, certain 3D flight modes such as knife edge and vertical hover are not possible. Combo 1 also does not include the PC interface which means you will not be able to access automatic firmware updates using a personal computer running Windows operating systems., To view video demonstrations, click the YouTube links below:, CPII Quick Setup Video, Size:, CPII Computer Module (LxWxH):, 1.754" x 1.115" x 0.460", CPII Main Sensor (LxWxH):, 0.965" x 0.965" x 0.360", CPII Vertical Sensor (LxWxH):, 0.965" x 0.701" x 0.360", IRNet Router (LxWxH):, 1.205" x 1.005" x 0.532" (not including mount tabs), Weight:, Ratings:, System will operate on normal R/C voltage range of approximately 3.5v to 6v., Power Source:, System is powered from your radio's receiver., Applications:, Adds safe and effective flight stabilization to any R/C model aircraft for assistance in learning new aerobatic manuevers,, Radio:, The Co Pilot 2 is not an RF device and therefore it will operate with any type or brand of R/C radio system in,
Co Pilot II System Combo 2 The NEW Co Pilot ...Flying-Hobby
FUTABA R6303SBE 2.4GHZ FASST MID-RANGE MICRO RECEIVER
| Dimensions | 0.89 x 1.47 x 0.37" (22.5 x 37.4 x 9.3mm) Weight |
FEATURES:, For use with park flight or indoor use airplanes and small electric helicopters up to 39.4" (1000mm) main rotor diameter S.BUS system output port with three conventional channel outputs Compatible with S.Bus and conventional system servos and gyros Automatic FASST 2.4GHz 7-ch mode or 8ch/10ch/Multi-channel mode recognition One year limited warranty through Hobby Services beginning at date of purchase, INCLUDES:, Futaba R6303SBE FASST 2.4GHz Micro Receiver with Instruction Sheet, REQUIRES:, Installing in aircraft and connecting battery and servos, SPECS:,
This is the Futaba R6303SBE FASST 2.4GHz Micro Receiver.Flying-Hobby
FUTABA R6303SB S.BUS 2.4GHZ HIGH SPEED MICRO RECEIVER
| Power Requirement | 3.7-7.4V, Usable voltage 3.5-8.4V Dimensions |
FEATURES:, S.Bus system output and three conventional system channel outputs allows usage with conventional servos as well as S.Bus system compatible servos and gyros When linking procedure is performed, receiver recognizes the signal mode (FASST 2.4GHz 7ch mode or 8ch/10ch/Multi Channel Mode) automatically High-speed or normal operating mode One year limited warranty through Hobby Services beginning at date of purchase, INCLUDES:, Futaba R6303SB 3-18 Channel FASST 2.4GHz S.Bus Micro Receiver and Instruction Manual, :,
This is the Futaba R6303SB 3-18 Channel FASST 2.4GHz S.Bus ...Flying-Hobby
FRONT SHAFT, GEAR AND PULLEY SET - MINI TITAN E325
Description:, -The front shaft, gear and pulley set is designed to achieve TRUE operation for the front gear drive assembly. This design is improved over stock shaft by eliminating the need of applying glue on the shafts. It also comes with a CNC aluminum front pulley to eliminate the stripping of stock plastic front pulley. The front aluminum pulley fits perfectly on the new tail shaft and is held securely by set screws on the slot of the steel shaft. Moreover, the blue CNC gear is made of super strong material and is CNC machined to guarantee roundness and wobble-free. This system is designed to improve performance on, Includes:, -1 x CNC steel shaft, Usage:, -Thunder Tiger Mini Titan E325 helicopters, Features:*,
Mini Titan E325 helicopters -2 x CNC brass washers. -1 ...Flying-Hobby
PRECISION CNC FLYBARLESS HEAD SYSTEM - TREX 450 PRO/SPORT
Description:, - Flybarless Head System provides 15% more power and less part of Trex PRO/SPORT.Precision CNC Flybarless Conversion Kit is designed to convert T-REX PRO/SPORT helicopter into a flybarless machine.Flybarless system reduces the needs for flybarless system and thus reduce weight and mechanical complexity thus increase flight time and better 3D performance., Includes:, -CNC Aluminum Main Blade Grips, Features:*,
-This Flybarless conversion kit is designed with reducer arms to ...