HobbyKing
TURNIGY 3600MAH 4S 20C LIPO PACK
| Minimum Capacity | 3600mAh |
| Constant Discharge | 20C |
| Peak Discharge (10sec) | 30C |
| Pack Weight | 389g |
| Pack Size | 137 x 43 x 29mm |
| Charge Plug | JST-XH |
Configuration:, 4S1P / 14.8v / 4Cell, Discharge Plug:, 4mm Bullet-connector,
The new number one in performance and price! The new ...5 Reviews
HobbyKing
TURNIGY 3MM PHILIPS HEAD SCREWDRIVER
,
Turnigy 3mm Philips Head Screwdriver Ultra strong steel tip, wont ...5 Reviews
HobbyKing
TURNIGY 3648 BRUSHLESS MOTOR 1450KV
| Diameter of shaft | ?strong>F5mm |
| Length of front shaft | ?strong>F19.1mm |
| Magnet type | 45SH |
| No. of cells | 3-6S |
| RPM | 1450kv |
| Max efficiency current | 45A-50A |
| No load current | 11.1/4.6A |
| Current capacity | 70A/20sec |
| Internal resistance | 0.010ohm |
| Voltage | 3-6S |
| Prop | 7x5, EDF90 |
| ESC | 60A |
| Thrust | 1450-2300g |
| Power | 1600W |
Dimension:, 36mm x 51mm, 70mm(with shaft), Weight:, 181g (kv1450) (not including connectors), Lamination thickness: ., Specification:,
2mm Max performance; For EDF 1500~1800g model airplane. Download data ...5 Reviews
HobbyKing
TURNIGY 2815 EDF OUTRUNNER 4800KV FOR 55/64MM
| Specs | Kv- |
| Dimensions | 51 x 28mm |
| Shaft | 2.3/3.0mm |
| Voltage | 11.1V |
| Weight | 73g |
| No-load current | 3.2A |
| No-load RPM | 55560 |
| Load current | 39.6A |
| Load RPM | 42560 |
| Thrust | 750g |
| Mounting Hole Bolt Circle | 18mm |
| Mtg. Hole Number & Size | 4 x M2.5 |
5 Reviews
HobbyKing
TURNIGY 3600MAH 2S 30C LIPO PACK
| Minimum Capacity | 3600mAh |
| Configuration | 2S1P / 7.4v / 2Cell |
| Constant Discharge | 30C |
| Peak Discharge (10sec) | 40C |
| Pack Weight | 214g |
| Pack Size | 137 x 43 x 15mm |
| Charge Plug | JST-XH |
Discharge plug:, 4mm Bullet-connector,
The new number one in performance and price! The new ...5 Reviews
HobbyKing
TURNIGY 4.5MM HEX SOCKET SCREWDRIVER
,
Turnigy 4.5mm Hex Socket Screwdriver Ultra strong steel tip, wont ...5 Reviews
HobbyKing
TURNIGY 2200MAH 4S 30C LIPO PACK
| Minimum Capacity | 2200mAh |
| Constant Discharge | 30C |
| Peak Discharge (10sec) | 40C |
| Pack Weight | 251g |
| Pack Size | 105 x 34 x 31mm |
| Charge Plug | JST-XH |
| Discharge plug | XT60 |
Configuration:, 4S1P / 14.8v / 4Cell,
The new number one in performance and price! The new ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 4500MAH 10S 25~50C LIPO PACK
: 4500mAh, : 10S1P / 10 Cell / 37V, : 25C Constant / 50C Burst, : 1157g (including wire, plug & case), : 305x53x36mm, : JST-XH, Discharge Plug:, 4mm bullet-connector, Suited to the following models:, MIKADO LOGO600/600SE, MA Furion 6, MA Furion 6, Joker 3,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
TURNIGY AE-20A BRUSHLESS ESC
| Output | Continuous 20A, burst 25A up to 10 seconds. |
| Input Voltage | 2-4 cells lithium battery or 5-12 cells NIMH battery. |
| BEC | Linear 2A @ 5V |
| Control Signal Transmission | Optically coupled system. |
| Max Speed | 2 Pole |
| 6 Pole | 70,000rpm |
| 12 Pole | 35,000rpm |
| Size | 50mm (L) * 26mm (W) * 12mm (H). |
| Weight | 19g. |
| Multiple protection features | Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection |
| Factory default settings | Brake |
| Battery type | Li-xx (Li-ion or Li-Po) |
| Low voltage cutoff threshold | Soft cut-off (2.6V) |
| Timing setup | Low |
| Soft Acceleration Start Up | Normal |
| Low voltage cutoff type | Medium |
Specification:, Features:, High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency., Programming features:, Brake setting (we recommend using brake for only folding props applications),
The Turnigy AE series are based on new powerful microprocessor. ...5 Reviews
HobbyKing
TURNIGY INFRARED THERMOMETER (-33 ~ 180CELSIUS)
| Operating Range | 0~50C (32~122F) |
| Full Range Accuracy | +/- 2.5C, 2.5% |
| Distance | 2~40cm |
| Emissivity Range | 0.95 fixed |
| Wave Length | 5um~14um |
| Power Supply | LR44X2 |
Measuring Range :, -33~180C (-27.4~356F), Spot Range: 1:1 (1mtr distance measures 1mtr spot size),
The all new Turnigy temp checker now handles temp up ...5 Reviews
HobbyKing
TURNIGY 500MAH 2S 20C LIPO PACK
| Minimum Capacity | 500mAh |
| Configuration | 2S1P / 7.4v / 2Cell |
| Constant Discharge | 20C |
| Peak Discharge (10sec) | 30C |
| Pack Weight | 36g |
| Pack Size | 55 x 30 x 10mm |
| Charge Plug | JST-XH |
5 Reviews
HobbyKing
TURNIGY NANO-TECH 2650MAH 4S 25~50C LIPO PACK
: 2650mAh, : 4S1P / 4 Cell / 14.8V, : 25C Constant / 50C Burst, : 275g (including wire, plug & case), : 145x44x22mm, : JST-XH, Discharge Plug:, 4mm Bullet-connector,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
TURNIGY 3MM LONG SHAFT HEX SCREWDRIVER
,
Turnigy 3mm long shaft Hex Screwdriver Ultra strong steel tip, ...5 Reviews
HobbyKing
TURNIGY 4MM PHILIPS HEAD SCREWDRIVER
,
Turnigy 4mm Philips Head Screwdriver Ultra strong steel tip, wont ...5 Reviews
HobbyKing
TURNIGY 1811 BRUSHLESS INDOOR MOTOR 1800KV
| Diameter of shaft | F2mm |
| Length of front shaft | F8.3mm |
| Magnet type | 45SH |
Dimension:, 22mm x 18mm, 30mm(with shaft), Weight:, 11g (kv1800) (not including connectors), Lamination thickness: .,
Turnigy 1811 Brushless Indoor Motor 1800kv 2mm Download data files; ...5 Reviews