ReadyMadeRC
UMX RADIAN BNF
| Wingspan | 28.7 in (730mm) |
| Overall Length | 16.5 in (418mm) |
| Flying Weight | 1.50 oz (43 g) |
| Motor Size | 8.5mm coreless brushed motor |
| Radio | 4+ channel transmitter required |
| CG (center of gravity) | 1.22 in (31mm) back from the leading edge of wing at wing root |
| Recommended Battery | 1S 3.7V 150mAh 25C LiPo |
| Approx. Flying Duration | 8-10 minutes |
| Charger | 1S 300mA LiPo USB Charger |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Indoor/Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
® technology gives a pilot the feeling of flying a much larger glider especially outdoors because of its renowned ability to smooth out the effects of wind and turbulence. Its distinctively curved wing delivers outstanding lift and impressive glide ratio using 3-channel control simplicity. The lightweight brushed power system requires just a single-cell Li-Po battery to provide excellent launch performance and long flight times. Plus the one-piece wing can be easily removed and stored in the handle-equipped box making your ability to soar through the clouds as convenient as can be. You’ll be in the air in no time thanks to great features like:, , Flaps: No,
The first ultra micro motor glider with AS3X® technology. Features ...HobbyKing
FLYCAT EDF FOAM JET VERY FAST (KIT ONLY)
| WingSpan | 640mm |
| Length | 800mm |
| Weight | 290g |
| BESC | 25A (not included) |
| Motor | 4800kv 20-30 size Inrunner (not included) |
| Lipoly | 1300mAh 11.1v 20C (not included) |
5 Reviews
HobbyKing
S-PRO FP II 2.4GHZ MICRO HELI W/ 2.4GHZ TX (V2)
| Main Rotor Diameter | 190mm |
| Tail Rotor Diameter | 37mm |
| Length | 207mm |
| Motor Size | Brushed motor |
Features:, No assembly required; be in the air within 10 minutes of opening the box!, Specifications:, Gross Weight:, .95 oz (27g) with battery, Battery:, 1S 3.7V 120 mAh Li-Po,
FIXED WING PILOTS, DONT BE AFRAID! With a little practice, ...5 Reviews
HobbyKing
TURNIGY TRANSMITTER GLOVE (2.4GHZ/NECKSTRAP READY)
| Maximum transmitter size | 270x270mm |
5 Reviews
HobbyKing
FF SUPER CHIPMUNK ELECTRIC ARF
| Material | Fibreglass & balsar. |
| Wingspan | 998mm |
| Length | 810mm |
| Wing Area | 16dm sq. |
| Height | 210mm |
| Airfoil | NACA2416 |
| Flying Weight | 820g |
| Suggested prop | 7060 or larger |
5 Reviews
HobbyKing
HXT 2730 DIY KIT
| Wire Guage | .44mm |
| https | //www.hobbyking.com/hobbyking/store/comersus_viewItem.asp?idProduct=3613 |
5 Reviews
HobbyKing
TURNIGY MINI MEMS AVCS GYRO & PROGRAM BOX
| Specification | Sensor Type |
| Operating voltage | 4-10 Volts, current < 60mA |
| Temperature range | -10°C to +50°C |
| Size | 20.5×19.5×10mm |
| Weight | 10g |
| Servo compatibility | 1520uS/333Hz, 1520uS/250Hz, 1520uS/167Hz and 760uS/333Hz digital servos, 1520uS/71Hz Analog servo. |
5 Reviews
HobbyKing
HOBBY KING SCALE AIRPORT WINDSOCK (RIP-STOP)
| Length | 800mm |
| Inlet Diameter | 250mm |
5 Reviews
HobbyKing
NTM PROP DRIVE SERIES 35-36A 1800KV / 875W
| Max current | 65A |
| Shaft | 4mm |
| Weight | 120g |
| ESC | 70A |
| Cell count | 3s~4s Lipoly |
| Bolt holes | 18.9mm & 25mm |
Specs:, Model:, NTM Prop Drive 35-36A 1800, Kv:1800rpm/v, Max Power:, 700W @ 12v (3S) / 875W @ 15v (4S), Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Suggested Prop:, Prop test data coming soon!,
NTM Prop Drive motors are rock solid performance outrunners with ...5 Reviews
HobbyKing
NTM PROP DRIVE SERIES 35-36A 910KV / 350W
| Model | NTM Prop Drive 35-36A 910 |
| Turns | 10T |
| Max current | 38A |
| Rated Power | 350w |
| Shaft | 4mm |
| Weight | 117g |
| Bolt holes | 18.9mm & 25mm |
| ESC | 30A |
| Cell count | 3S Lipoly |
| Suggested Prop | 10x4 |
| Efficiency | 83% |
Kv: 910rpm/v, Bolt thread: M3,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews
HobbyKing
NTM PROP DRIVE SERIES 35-36A 1400KV / 550W
| Max current | 55A |
| Max Power | 550W |
| Shaft | 4mm |
| Weight | 117g |
| ESC | 60A |
| Cell count | 3s~4s Lipoly |
| Bolt holes | 18.9mm & 25mm |
| Suggested Prop | 8x4 ~ 11x5.5 |
Specs:, Model:, NTM Prop Drive 35-36A 1400, Kv:1400rpm/v, Turns:7, Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Tests:, 8x4 - 14.8v - 621W - 42A,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews
HobbyKing
EC-135 COAX EUROCOPTER W/ 2.4GHZ TX & LIPO (LARGE 450 SIZE)
| Main Rotor Diameter | 450mm (17.7 inch) |
| Length | 490 mm (19.29 inch) |
| Height | 260 mm (10.23 inch) |
| Flying Weight | 380g (13.4 oz) |
| Servo | 2 x 9g servos |
Specifications:, Driven system:, 2 x 370 carbon brush motor, Battery:, 7.4V 1000mAh Lipo battery, Control system:, 4CH 2.4GHz Transmitter, Required:, 8 x AA Batteries for the Transmitter,
A big 450 size heli thats fantastic looking, and is ...3 Reviews
HobbyKing
NTM PROP DRIVE SERIES 35-36B 1400KV / 495W
| Model | NTM Prop Drive 35-36B 1400 |
| Max current | 53.94A |
| Shaft | 4mm |
| Weight | 117g |
| ESC | 60A |
| Cell count | 3s~4s Lipoly |
| Bolt holes | 18.9mm & 25mm |
Specs:, Model:, Kv:1400rpm/v, Turns:7, Max Power:, 495W @ 12v (3S) / Waiting test results (4S), Bolt thread:M3, Suggested Prop:, Prop test data coming soon!,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews
HobbyKing
HOBBY KING 401B AVCS DIGITAL HEAD LOCK GYRO
| Operating voltage | 4.8V ~6V( common for receiver) |
| Operating temperature | -lOL r-.rf-45 C |
| Dimensions | 28x26x20 mm |
| Operating current | 80mA |
Functions:, Compatible with both Digital and Analog systems, Specifications:, Digital proportional RIC system, IMPORTANT: Make sure you isolate your Gyro from vibration. Use double sided foam tape and never use cable ties. Vibration will cause harm to the Gyro and degrade performance.,
The now famous HK401B is known to have the same ...5 Reviews
HobbyKing
NTM PROP DRIVE SERIES 35-42A 1250KV 600W
| Shaft | 4mm |
| Weight | 148g |
| ESC | 60A |
| Cell count | 3s~4s Lipoly |
| Bolt holes | 18.9mm & 25mm |
Specs:, Model:, NTM Prop Drive Series 35-42A 1250Kv, Kv:1250rpm/v, Turns:6, Max current:56, Max Power:, 500W @ 12v (3S) / 600W @ 15v (4S), Bolt thread:M3, Suggested Prop:, Prop test data coming soon!,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews