HobbyWireless
FATSHARK DOMINATOR HEAD TRACKER MODULE
| - Futaba | in general Futaba 7 series radios and above support the HT |
| Unsupported radios | - Hitec Aurora9 |
Details:, This Head tracker module is specially and exclusively designed for the FatShark Dominator video glasses only., Known Supported radios:, - ezUHF (note ezUHF supports HT independently from the radio used, if your radio does not support HT, then can add HT via ezUHF, : The HT PCB can be easily damaged by accidentally applying voltage to the PPM line or vise versa, damage your radio. Fat Shark will not warranty any damage due to modified cables. Cables are inexpensive and in stock at most retailers.,
Thanks to the modular feature of Dominator video glasses, this ...GetFPV
OPENPILOT CC3D FLIGHT CONTROLLER (PRE-ORDER)
| These videos were flown with a QAV400 and CC3D. Pilots | MidwestRob and |
| 3-axis Gyroscope array and 3-axis Accelerometer | MPU-6000 |
| Supports several common RC inputs | 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers |
| ReceiverPort functions (configurable) | 6 PWM input channels or combined PPM stream, 4 PWM output channels |
| MainPort functions (configurable) | serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites |
| FlexiPort (configurable) | serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development) |
Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers,
Details PLEASE NOTE!!! If you're in the US and choose ...HobbyKing
X-GYRO 500 SINGLE AXIS HEAD TRACKING SYSTEM.
| Voltage | 8~12v |
| Weight | 20g |
| Range | +/- 90degree |
| FUTABA | (FF-7, FF-8, FF-9, T9Z, T12MZ, T14MZ) |
| Graupner | (MC20, MC24, MX22) |
| Multiplex transmitter | (Royal Evo, Cockpit SX, mc4000) |
| JR and other transmitters without programmable channel | (9303, 9X) |
Note:, A user manual can be downloaded from the files tab.,
The X-Gyro 500 is a simple single axis head tracking ...1 Reviews
ReadyMadeRC
STROBON XL POLICE STROBE (RED/BLUE) WITH WIRES
| Weight | 3.3g without cable |
| Dimentions | 51x18x7mm |
| Screw Hole Dimentions | 3mm holes with 43mm space |
| Working Voltage | 5-6v (we are suggesting 3A UBEC and 2S lipo for supply) |
| Current Consumption | 5mA(idle)/80mA(average when working) |
| Wire Length | 30cm standard servo cable with Futaba servo plug |
Features:, ,
New generation STROBON with remote controllable powerful RED - BLUE ...ReadyMadeRC
STROBON XL NAVIGATION STROBE (RED) WITH WIRES
| Weight | 3.3g without cable |
| Dimentions | 51x18x7mm |
| Screw Hole Dimentions | 3mm holes with 43mm space |
| Working Voltage | 5-6v (we are suggesting 3A UBEC and 2S lipo for supply) |
| Current Consumption | 5mA(idle)/80mA(average when working) |
| Wire Length | 30cm standard servo cable with Futaba style servo plug |
Features:, ,
New generation STROBON with remote controllable solid RED light and ...ReadyMadeRC
STROBON XL NAVIGATION STROBE (GREEN) WITH WIRES
| Weight | 3.3g without cable |
| Dimentions | 51x18x7mm |
| Screw Hole Dimentions | 3mm holes with 43mm space |
| Working Voltage | 5-6v (we are suggesting 3A UBEC and 2S lipo for supply) |
| Current Consumption | 5mA(idle)/80mA(average when working) |
| Wire Length | 30cm standard servo cable with Futaba style servo plug |
Features:, ,
New generation STROBON with remote controllable solid RED light and ...ReadyMadeRC
STROBON XL NAVIGATION STROBE (BLUE) WITH WIRES
| Weight | 3.3g without cable |
| Dimentions | 51x18x7mm |
| Screw Hole Dimentions | 3mm holes with 43mm space |
| Working Voltage | 5-6v (we are suggesting 3A UBEC and 2S lipo for supply) |
| Current Consumption | 5mA(idle)/80mA(average when working) |
| Wire Length | 30cm standard servo cable with Futaba style servo plug |
Features:, ,
New generation STROBON with remote controllable solid RED light and ...ReadyMadeRC
FY-30A PRO INERTIAL FLIGHT STABILIZATION SYSTEM
| • Any other configuration inquiries, please email us | feiyudz@yahoo.cn. |
| Includes | FY30A module |
FY30A has an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space. By using your remote control, the unit can be turned on or off for the following functions:, - Level flight – When stabilization is activated, the FY-30A will automatically control the aircraft for smooth easy flying. For beginners in RC aircraft flying, this is advantages as it makes flight easier and increases the student pilot self-confidence. The system can be activated throughout the entire flight duration, from take off to landing., The FY30A can be used in the following fixed wing models:, • Traditional layout fixed-wing aircraft with Aileron, Elevator and Rudder, RC Radio suitability:, The FY-30A has been tested to work well with the following RC system:, • Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4G systems, The FY-30A can be operated in three flight modes modes:, - Mode 1: FY-30A Deactivated Mode. In this mode, the FY-30A stabilization function is turned off. The aircraft is completely under the control of the pilot., - Mode 2: 3D Control Mode. In this mode, the balancer utilizes its 3-axis gyroscope to sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle position) the FY30A will lock the current aircraft attitude. This prevents rolling of the aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be easily maneuvered to complete a variety of 3D flight with added stability and smoothness., - Mode 3: Auto Stabilization mode. In this mode, the FY-30A will automatically command the aircraft control surfaces to maintain level flight at all times.,
GREAT NEW FEATURE! The FY30A can now also control multi-rotor ...HobbyKing
FATSHARK BASE SD FPV HEADSET
| Kit Includes | BASE SD headset |
| Optics | FOV (field of view) |
| 35°diagonal (Image size | 1.3m @ 2m) |
| Supports optional diopter lens inserts | -2, -4, -6 dpt |
| Power supply | 7 - 13 V (2S/3S supply) |
| Power consumption (@7.4V nominal) | 150mA |
| Weight | 120g |
Headset Specifications:, Interpupillary (IPD) distance:, 59 – 69 mm (adjustable), Audio:, Stereo (requires adjustable volume earphone accessory), User Controls:, Contrast/brightness control, Electrical:, Display:, Full color LCD LED backlit Kopin CyberDisplay 922,000 pixels binocular display (640 X 480 VGA) NTCS/PAL auto selecting, Interface:, Futaba Square 6pin AV in port (Vin, GND, AudR, AudL, Vid),
Built for serious FPVer’s, the new BASE SD goggle is ...5 Reviews
HobbyKing
TURNIGY TGY-R5180MG 180 DEGREE METAL GEAR ANALOG SERVO
| Weight | 12g |
| Torque | 2.0kg.cm (6.0v) |
| Voltage | 4.8-6.0v |
| Type | Analog Micro |
| Gear Train | Meta |
| Lead Length | 180mm |
| Plug | JR/Futaba |
Specs:, Size:, 23.2mmx12.0mmx21.6mm, Speed:, 0.12sec/60deg (4.8v) - 0.10 sec/60deg (6.0v), Ball Bearing:No,
Turnigy metal gear analog mini servo with 180 degree stop ...5 Reviews
HobbyWireless
FAT SHARK BASE SD VGA VIDEO GLASSES
| FOV (field of view) | 35°diagonal (Image size |
| Interpupillary (IPD) distance | 59 – 69 mm (adjustable) |
| Supports optional diopter lens inserts | -2, -4, -6 dpt |
| User Controls | Contrast/ brightness control |
| Power supply | 7 - 13 V (2S/3S Lipo Battery) |
| Power consumption (@7.4V nominal) | 150mA |
Details:, Built for serious FPVer’s, the new BASE SD goggle is the only choice for tethered video piloting., Headset Specifications:, , Optics:, Audio:, Stereo (requires adjustable volume earphone accessory), Electrical:, Mechanical:, Ergonomic molded headset w/ adjustable headband, Weight:, 120g (not including cable), Display:, Full color LCD LED backlit Kopin CyberDisplay, Head Tracker:, None, Interface:, Futaba Square 6pin AV in port (Vin, GND, AudR, AudL, Vid),
The BASESD has dedicated tooling for a smaller, sleeker profile ...HobbyWireless
FY-91Q NAVIGATION EDITION
| System Specifications | FY-91Q Module |
| Mode 3 | Return to Home |
| Mode 1 | Stabilizer Mode |
| Mode 1 | Stabilized Mode |
| Mode 2 | Automated Hover Hold. |
| Mode 3 | Automated Return to Home Mode. |
Details:, FY-91Q flight controller for helicopters, What's Included:, , FY-91Q Navigation Edition contains the following hardware:, • FY-91Q control module x 1;, :, The FY91Q can be installed and flown it the following multi-rotor aircraft:, , :, FY-91Q have been tested to work with the following RC systems:, • Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems, Mode 2:, Automated Hover Hold,
Multi-rotor flight stabilization & Autopilot System • FY91Q RC receiver ...HiModel
FEIYU INERTIAL ATTITUDE STABILIZER FY-30A
| ● Mode 1 | FY-30A Deactivated Mode. In this mode, the FY-30A stabilization function is |
| ● Mode 2 | 3D Control Mode. In this mode, the stabilizer utilizes its 3-axis gyroscope to |
| ● Mode 3 | self-balancing mode. In this mode, the FY-30A will automatically command the |
, , , , , , Specifications:, , , , , , , , , , , Applications, The FY30A can be used in the following fixed wing models:, · Traditional layout fixed-wing aircraft with Aileron, Elevator and Rudder, · Flying wings with rudder;, · Flying wings with no rudder;, · Airplanes with no ailerons (rudder and elevator only), · V-tail airplanes with ailerons;, · V tail airplanes with no ailerons, · Any other configuration, please email us for consultation - feiyudz@yahoo.cn., Remote control system:, The FY-30A has been tested to work well with the following RC system:, · Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4G systems, · Graupner / JR PPM 8, PPM 12, SPCM mode;, · MPX PPM8, PPM 12 with UNI mode, · any other system with a neutral position of 1.5 ms (standard remote control device)., FY-30A OperatingMode, The FY-30A can be operated in three flight modes modes:, turned off. The aircraft is completely under the control of the pilot., sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle, position) the FY30A will hold the current aircraft attitude. This prevents rolling of the, aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be, easily maneuvered to complete a variety of 3D flight with added stability and smoothness., aircraft control surfaces to maintain level flight at all times., The instruction to change the FY30A flight modes is via a spare channel on the RC receiver., , ,
Features: FY-30A is an inertial attitude measurement instrument used for ...2 Reviews
HiModel
FY-91Q MULTI-ROTOR FLIGHT STABILIZATION & AUTOPILOT SYSTEM
, , , , , , Specifications:, , , , , , , , , , , FY-91Q Module, Operating voltage ：4.0~6.0 Volt, Current consumption ：50mA (5V input), Dimensions ：55 x 33 x 20 mm, Weight (not including wires) ：20g, Operating Temperature ：-25°C~ +70°C, The maximum allowable rotation rate ： 3 rotations per minute, APPLICABLE AIRCRAFTMODELS, The FY91Q can be installed and flown it the following multi-rotor aircraft:, - 4 motored quadcopters;, - Tri-axial rotory aircraft with 6 motors, - Six-axial multi-rotor aircraft (6 motors), REMOTE CONTROL SYSTEM COMPATIBILITY, FY-91Q have been tested to work with the following RC systems:, · Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems；, · Graupner/JR PPM 8, PPM 12, SPCM mode；, · MPX PPM8, PPM 12 with UNI mode, · Any remote control system using the standard of 1.5 ms neutral position., , ,
Features: THIS IS FY91Q MODULE ONLY, THE GPS & COMPASS ...HiModel
UNIVERSAL FIBERGLASS DUAL-SHAFT DAMPING AERIAL TILT T8 (SUIT FOR CAMERA GOPRO)
| Material | Fiberglass + metal |
| Mounting tube diameter | 8mm (suit for 8mm tube) |
| Weight | 60g (excluding servo) |
| Moving direction | 2 axis |
| Servo requirement (not included) | 1 x standard size servo(like Futaba 3001, 3003 etc), 1 x 9g mini servo |
, , , , , , Specifications:, , , , , , , , , , , Universal Dual-shaft Damping Aerial Tilt T8 (suit for Camera Gopro), * Not assembled, come in loose parts), , ,
Features: Suit for car cameras like Gopro etc.