Skip to content

ReadyMadeRC

FY-91Q STABILIZER

,

FY91Q MULTI ROTOR SYSTEM Basics on how the system works: ...

ReadyMadeRC

FY-30A ORANGE INERTIAL FLIGHT STABILIZATION SYSTEM

,

GREAT NEW FEATURE! The FY30A can now also control multi-rotor ...

ReadyMadeRC

DRAGONOSD TO READYMADERC FEMALE AUDIO/VIDEO ADAPTER

Includes1 adapter cable
This cable set will allow you to plug in the ...

ReadyMadeRC

HORNET OSD + FY31AP (FY-31AP TRADE EDITION)

For FY-21APFixed Altitude flying mode; for FY-3ZT/FY-31AP
GPS speed (Unitkm/h)
Current latitude and longitude of the plane (Format“dddmm.mmm” )
The angle of turning to the return point (Unitdeg)
Total flight time (Format“mm.ss”)
Course angle of flight (Unitdeg)
Operating temperature(Unit℃)
(UnitmA / h)
Climb rate  (Unitm/s)
Inputvoltage4.0 ~ 6.0 Volt;
Currentdraw50mA (5V);
Size47x 27x 20 mm;
Weight (excluding wires)25g;
Temperature range-25 ° C ~ +70 ° C;
Maximum rate of rotation≤ 2000 ° /s
Input voltage3.0 ~ 3.3 Volt;
Currentdraw60mA (3.3V);
Size32 x32x 10 mm;
Weight (excluding wires)22g;
Temperature range-25 ° C ~ +70 ° C;

The telemetry data is as below:, , Relative altitude (Unit : m), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes  separately are as following: A. All Information Displayed; B., The modes are shown as below:, , By using your remote control, the FY-31AP can be turned on or off for the following functions:, , The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, , :, GPS module:, The FY-31AP can be installed in the following aircraft :, , Any other configuration , please e-mail us for enquiry:, service@feiyu-tech.com, The FY-31AP has been tested to work with the following RC systems:, , Includes:,

Brief Introduction The Hornet- OSD overlays flight telemetry information onto ...

ReadyMadeRC

FAT SHARK DOMINATOR HEAD TRACKER MODULE

,

Head tracker module for the FatShark Dominator video glasses. When ...

ReadyMadeRC

FAT SHARK PREDATOR VIDEO GLASSES

FOV (field of view)25 degrees diagonal
Interpupillary (IPD) distance63.5mm (fixed)
Optional diopter lens inserts-2, -4, -6 dpt Image size
User ControlsChannel selection
Power supply7 - 13 V (2S/3S supply)
Power consumption (@7.4V nominal)300mA wireless mode
Weight150g
NoteFat Shark headsets use Airwaves brand RF modules.

Package includes:, Predator goggles with integrated 5.8GHz receiver and MIG V4 head tracker, Optics:, Audio:, Stereo (optional headphones available, Electrical:, Antennae:, External (dipole included or circular polarized compatible), Mechanical:, Ergonomic molded headset, Head Tracker:, M.I.G. (magnetic/ inertial/ gyro) V4, Interface:, 3.5mm AV in/out port, Operating Frequencies:, 5.8 Ghz Receiver Module,

Closeout pricing, cannot be back-ordered. FREE SHIPPING! FatShark quality on ...

ReadyMadeRC

FAT SHARK DOMINATOR VIDEO GLASSES

Features:, Form fitting silicone eye cups, Note for warranty claims for goggles:, The screens in all types of video goggles are susceptible to damage from the sun.  Care should be taken to avoid direct sunlight into the eyepieces.  Dead or damaged pixels from sun damage are not covered under the manufacturers warranty.  Also, from time to time there may be a dead pixel on any LCD display.  An isolated dead pixel is not covered under warranty or replacement.  Only display issues that affect the picture quality such as multiple pixels are covered under warranty, and any groups of dead pixels must be reported within 1 week of receipt of the goggles.,

Experience the new Dominator; an innovative 3rd generation FPV headset ...

ReadyMadeRC

FAT SHARK ATTITUDESD VGA VIDEO GLASSES

NoteBattery, charger and adjustable earphones are sold separately.
Option 1The
Option 2If you want to share the power supply with your ground station, the
Option 3Any 2s-3s lipo with a 2.1mm barrell connector like
Interpupillary (IPD) distance59-69mm (adjustable)
Power input7-13V (2s/3s supply)
Power Consumption @7.4VDC200/350mA (direct/wireless)
Weight150g
Power Supply7-13V (2s-3s supply)
Power consumption310mA@7.4VDC
Transmitting Power250mW
Ch15740, CH2
Mechanical55x26x11mm
Weight22g with antenna

Features: Adjustable IPD, 35 degree FOV VGA display, secured rubber eyecups, lightweight, integrated 5G8 receiver and MIG V4 head tracker., Kit includes:, AtttitudeSD headset (with RX and HT) (Uses the high performance NexWaveRF receiver module), *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.  ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,

AttiudeSD (VGA, 640X480) FPV goggle with adjustable IPD, large 35 ...

ReadyMadeRC

DRAGONLINK 2 LONG RANGE UHF RECEIVER

Includes:, 1 Long Range Receiver with Antenna, Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.  Ready Made RC, LLC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,

One of the most popular long range UHF R/C systems, ...

ReadyMadeRC

FATSHARK BASE SD VGA VIDEO GLASSES

interpupillary (ipd) distance59-69mm (adjustable)
power input7-13v (2s/3s supply)
power consumption @12vdc100ma
weight120g
option 1the
Option 3Any 2s-3s lipo with a 2.1mm barrell connector like

package includes:, , specifications:, , Option 2: If you want to share the power supply with your ground station, the included cable allows for that.  You simply feed the power from the 2.1mm barrel connector that normally powers your video receiver/ground station into the included cable, and then plug the extra power plug included on the cable into your video receiver/ground station so you are powering both devices with the same battery.,

built for serious fpver’s, the new base sd goggle is ...

ngHobbies

FATSHARK MIG HEADTRACKER

Features:, Built in gyroscopic sensors, Weight:, 150 gr., Documentation:,

One of the most affordable and most feature rich headtracker ...

ngHobbies

DIVERSITY DUO 5.8 RECEIVER

Receiver sensitivity-85dBm
Frequencies5740, 5760, 5780, 5800, 5820, 5840, 5860MHz
Weight200 grams
Size80 x 100 x 23mm
Input voltage6 – 12V at 500 mA (3s Lipo Ideal)
DocumentationComing soon

Features:, A/V receiver with two (diversity) antenna inputs -,

The Immersion RC's Diversity Duo receiver is the best diversity ...

ngHobbies

600MW 5.8GHZ COMBO

Receiver sensitivity-90dBm
Frequencies5720, 5740, 5760, 5780, 5800, 5820, 5840, 5860 and 5880MHz
Weight70 grams
Size72 x 43.5 x 11mm
Input voltage6 – 18V at 200 mA (2 or 3s Lipo Ideal)
Operating Frequencies5720, 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880MHz
Weight42 grams
Size45 x 28 x 18mm
Input voltage range8-12V

The package contains:, 1 x Highly integrated mini 5.8GHz 600 mW transmitter with cooling fan, so it can be installed in closed spaces as well., Receiver:, A/V receiver with one antenna input, Transmitter:, 600mW output power, Documentation:, N/A, use the connection diagram in the photo below for connection clarification., Power Plug:, Middle pin positive, Manufacturer warranty:, 3 months from the date of purchase,

This is a combo deal for a plug and play ...

ngHobbies

36" SERVO EXTENNSION CABLE

Futaba or JR 36" servo extension cord." />

,

Standard Futaba or JR 36" servo extension cord.

ngHobbies

MINI 5.8GHZ RECEIVER

Receiver sensitivity-90dBm
Frequencies5720, 5740, 5760, 5780, 5800, 5820, 5840, 5860 and 5880MHz
Weight70 grams
Size72 x 43.5 x 11mm
Input voltage6 – 18V at 200 mA (2 or 3s Lipo Ideal)

Features:, A/V receiver with one antenna input, Documentation:, N/A, see the below pictures for connectivity diagram and connection., Power plug:, Middle pin positive, Note:, This receiver may not be 100% compatible with Fatshark and Immersion transmitters even if the frequencies match.,

The Mini 5.8Ghz receiver is the smallest on the market ...

BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby