ReadyMadeRC
GRAUPNER G-SONIC SPORT 16" X 12" - 3 BLADE
Diameter / Pitch | 40/30 cm |
All-up weight, approx. | 138 g |
Diameter / Pitch (Inch) | 16/12 " |
Diameter / Hub bore | 8 mm |
ReadyMadeRC
SPORT CUB S RTF WITH SAFE
Wingspan | 24.3 in (616mm) |
Overall Length | 16.3 in (414.5mm) |
Flying Weight | 2.0 oz (57 g) |
Radio | 6 Channel (Included) |
Trim Scheme Colors | Blue and White |
Prop Size | 130 x 70mm |
Recommended Battery | 150mAh 1S (included) |
Charger | Fast DC Charger with USB port connectivity |
Landing Gear | Fixed main with steerable tail wheel |
Experience Level | Beginner |
Recommended Environment | Indoor/Outdoor |
Is Assembly Required: No,
Learn at your own pace with the HobbyZone® Sport Cub ...ReadyMadeRC
PARKZONE - T-28 TROJAN PNP PKZ4475
Aileron | 3/8 inch (9.5mm) |
Elevator | 1/2 inch (13mm) |
Rudder | 5/8 inch (16mm) |
Aileron | 1/2 inch (13mm) |
Elevator | 5/8 inch (16mm) |
Rudder | 7/8 inch (22mm) |
Wingspan | 44 in (1118mm) |
Overall Length | 36 in (914mm) |
Flying Weight | 30 oz (875 g) |
Motor Size | PKZ 480 960Kv outrunner brushless motor |
Radio | Minimum 4-channel recommended (not included) |
Servos | 3-wire servos (included) |
Trim Scheme Colors | White with black, red, and blue |
Prop Size | 9.5 x 7.5 |
Speed Control | E-flite 30A Pro Brushless ESC with Switch Mode BEC (EFLA1030) |
Recommended Battery | Minimum 3-cell 1800mAh Li-Po battery (not included) |
Scale | Warbird |
Landing Gear | Wire nose gear and main gear, foam wheels |
Steering | Steerable nose gear |
All that's needed to complete:, Radio, battery, charger, and receiver, All that's needed to complete:, Radio, battery, charger, and receiver, X-Port: No,
Powerful, High-Performance Historical Warbird Features Steerable nose gear and fixed ...ReadyMadeRC
MOSQUITO MK VI PNP
Wingspan | 1244mm (49.0 in) |
Overall Length | 955mm (37.6 in) |
Flying Weight | 42.3 oz (1200 g), 44.4 oz (1260 g) with flaps servos and retracts installed |
Motor Size | (2) 370-size brushless outunner |
Radio | 4+ channel (6+ channel for optional retracts and flaps) required |
Servos | (2) DSV130 and (2) SV80 servos (installed) |
CG (center of gravity) | 2.90-3.30 (73-83mm) back from the leading edge of wing at fuselage |
Prop Size | 8.25 x 5.5 |
Speed Control | (2) 18-amp brushless (installed) |
Recommended Battery | 11.1V 3S 2200mAh 25C LiPo (required) |
Flaps | Optional (servo |
Retracts | Optional (EFLG100) |
Control Throw (Ailerons) | Low |
Control Throw (Elevator) | Low |
Control Throw (Rudder) | Low |
Control Throw (Flaps) | Half |
Minimum Age Recommendation | 14 years |
Experience Level | Intermediate |
Recommended Environment | Outdoor |
Assembly Time | Less than 1 Hour |
Is Assembly Required | Yes |
ReadyMadeRC
PARKZONE ARCHER RTF
Wingspan | 36.8 in (935mm) |
Overall Length | 25.6 in (650mm) |
Flying Weight | 16.4 oz (466 g) |
Motor Size | 370-size 1300Kv brushless outrunner (installed) |
Radio | DX4e 4-channel transmitter (included) |
Servos | SV80 servos (installed) |
Trim Scheme Colors | Red, grey, black and white |
CG (center of gravity) | 1.6 in (40mm) back from the leading edge of wing |
Prop Size | 8.25 x 5.5 |
Spinner Size | 1.0 in (25mm) |
Speed Control | 10-amp (installed) |
Recommended Battery | 7.4V 2S 1300mAh 20C Li-Po (included) |
Charger | 2S DC Li-Po balancing charger (included) |
Minimum Age Recommendation | 14 years |
Experience Level | Intermediate |
Recommended Environment | Outdoor |
Assembly Time | Less than 1 Hour |
Is Assembly Required | Yes |
Flaps: No, Retracts: No,
Features 4-channel control—throttle, elevator, aileron and rudder Powerful 370-size, 1300Kv ...ReadyMadeRC
NIGHT VAPOR BNF
Wingspan | 14.8 in ( |
Overall Length | 15.3 in (389mm) |
Flying Weight | 16.4 g (0.6 oz) |
Prop Size | 140mm x 45mm |
Recommended Battery | 70mAh 3.7V 14C Li-Po |
Is Assembly Required: No,
Like the original Vapor® aircraft, the Night Vapor™ model is ...HobbyKing
O.S. FS-95V RINGED FOUR STROKE GLOW ENGINE
Suggested Propellers | #F Glow Plug |
Displacement:, Bore:, Stroke:, Practical rpm:, Output:, Engine Weight:, Muffler Weight:,
In 1936, Shigeo Ogawa set up his original machine-shop, making ...ReadyMadeRC
3DR APM 2.6 AIRSPEED SENSOR KIT
Weight | 0.1 oz; 4 g (Just the sensor) |
Features:, ,
This is a stand-alone airspeed sensor. Includes Pitot Tube, 1 ...HobbyKing
XRAY X12 2015 LINK SPEC 1/12TH SCALE PAN CAR (KIT)
Other suggested items | Reamer/hole punch, CA glue, thread-locking glue, silicone fluid |
Class:, Width:, Length:, Wheelbase:, Weight:, 2-Channel radio system,
HobbyKing is now introducing the new XRAY X12 15' Link ...ReadyMadeRC
NERDCAM3D - STEREOSCOPIC 3D MK.2 FPV CAMERA
: The camera is fully compatible with the Dominator V3 goggle. It is however not a 16:9 aspect ratio camera. Hence the 3D-image inside the Dominator V3 goggle will be stretched horizontally form 4:3 to 16:9 aspect ratio.,
The NerdCam3D Mk.2 is the newest, most advanced and most ...ReadyMadeRC
BLADE - 180 QX HD BNF WITH SAFE BLH7480A
Type | Quad-Copter |
Main Rotor Diameter | 14.0 in (355mm) |
Gross Weight | 3.35 oz (95 g) |
Length | 11.5 in (292mm) |
Motor Size | (4) 8.5mm brushed |
Kit/ARF/RTF | RTF |
Minimum Age Recommendation | 14 years |
Experience Level | Beginner |
Recommended Environment | Indoor/Outdoor |
Assembly Time | Less than 1 Hour |
Is Assembly Required | Yes |
HobbyKing
MULTIROTOR AUTOPILOT - YS-X4 V2
,
The YS-X4 V2 from ZERO TECH adheres to continuous innovation ...HobbyKing
MULTIROTOR AUTOPILOT - GEMINI
,
The Gemini Multi-Rotor Flight controller is a complete redundancy autopilot ...ReadyMadeRC
SIS LABS - DETACH Y6 - FLIGHT CONTROLLER READY
,
Closeout - Please do NOT backorder! If you are looking ...