HobbyKing
WILGA-2000 R/C AIRPLANE W/ESC, MOTOR, SERVO AND FLOATS PLUG-N-FLY
| Length | 888mm |
| WingSpan | 1160mm |
| Propeller | 3 blades 8x6 |
| Wing load | 16.82g sp.dm |
| Flying Weight | 550g / 600g (with floats) |
| Motor | Brushless outrunner |
| ESC | 18A w/BEC |
| Battery | 7.4v 1300mAH 2S1P (Not included) |
| Servos | 3 x 8g |
| Battery compartment | 72x39x34mm |
5 Reviews
HobbyKing
F4U CORSAIR R/C WARBIRD PLUG-N-PLAY
| Wing Span | 800mm (31.5in) |
| Length | 660mm (26in) |
| Weight | 420g |
| Motor | 2607 Brushless outrunner 1400kv |
| Prop | 3-Blade |
| ESC | 10A brushless |
| Battery | 7.4V 1000mAh 2S1P (Not included) |
| Battery compartment size | 99x33x20mm |
| Servos | 5g x 3 |
| Required | Your TX & RX |
Specification:,
The Famous F4U Corsair in a totally new style! The ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 2200MAH 3S 25~50C LIPO PACK
| Discharge Plug | XT60 |
: 2200mAh, : 3S1P / 3 Cell / 11.1V, : 25C Constant / 50C Burst, : 187g (including wire, plug & case), : 106x35x24mm, : JST-XH, Suited to the following models:, ALIGN T-REX450, E-flite Blade 450 3D, BEAM E4, MSH Protos Mini, Furion 450, ThunderTiger E325/Mini Titan SE.,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 2200MAH 3S 45~90C LIPO PACK
| Discharge Plug | XT60 |
: 2200mAh, : 3S1P / 3 Cell / 11.1V, : 45C Constant / 90C Burst, : 201g (including wire, plug & case), : 112x36x26mm, : JST-XH, Suited to the following models:, ALIGN T-REX450, E-flite Blade 450 3D, BEAM E4, MSH Protos Mini, Furion 450, ThunderTiger E325/Mini Titan SE, Caliber 450V, CALIBER 400, RAVE 450, GAUI 330S,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
HK EDF70 BRUSHLESS POWER SYSTEM 2800KV & 45A ESC
| Size | 70mm |
| Weight | 139g |
| Dimensions | 90x83mm |
| No.Of cells | 4S(14.8V) |
| Shaft diameter | 4.0mm |
| RPM/V | 2800 |
| Output Power | 550w |
| Max Current(<60s) | 36A |
| Thrust | 1200g(42.33oz.) |
| Recommended model weight | 800-1200g |
Motor:, 2839 Brushless outrunner, Blade type:6,
A high quality and powerful 70mm upgrade system. Spec.5 Reviews
HobbyKing
TURNIGY NANO-TECH 1800MAH 3S 25~50C LIPO PACK
| Capacity | 1800mAh |
| Dimensions | 115x35x21mm |
| Balance Plug | JST-XH |
| Discharge Plug | XT60 |
Voltage:, 3S1P / 3 Cell / 11.1V, Discharge:, 25C Constant / 50C Burst, Weight:, 161g (including wire, plug & case), Suited to the following models:, ALIGN T-REX450, E-flite Blade 450 3D/400 3D, BEAM E4, MSH Protos Mini, Furion 450, ThunderTiger E325/Mini Titan SE, Caliber 450V.,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
HK EDF64 BRUSHLESS POWER SYSTEM 3500KV & 45A ESC
| Size | 64mm |
| Weight | 139g |
| Dimensions | 100x77mm |
| No.Of cells | 4S(14.8V) |
| Shaft diameter | 3.0mm |
| Output Power | 520w |
| Max Current(<60s) | 35A |
| Thust | 1100g(38.8oz.) |
| Recommended model weight | 600-800g |
Motor:, 2836 Brushless outrunner, Blade type:5,
Boost the power of your stock 64mm jet with this ...5 Reviews
HobbyKing
HOBBYKING YAK 54 BRUSHLESS EPO PLUG-N-FLY
| Wing Span | 750mm (29.5in) |
| Length | 675mm (26.5in) |
| Weight | 355g (without battery) |
| Motor | 2407 Brushless outrunner 1200kv |
| Prop | 3 blade 8x6 |
| ESC | 20A brushless |
| Battery | 7.4V 1000mAh 2S1P (Not included) |
| Battery compartment size | 99x39x16mm |
| Servos | 5g x 3 |
| Required | Your TX & RX |
Specification:,
The YAK54 is a very neatly designed EPO 3D parkflyer. ...5 Reviews
HobbyKing
PROP & BACK-PLATE DRILL JIGS FOR DA100&150 \ DLE111 \ 3W50-170 \ TMM53-106
*Note*: It is best to drill propeller from the back face. Back out drill several times as you go to clear wood from the bit to ensure a smooth, accurate hole. Do not force the bit through the prop. Place bolt in first hole after drilling to help with alignment when drilling other holes. Please always orientate the prop with blade tips at 9 & 3 o'clock or horizontal to the ground with the compression stroke before drill. In case of dead stick landings this can save your prop and your airframe.,
Prop & Back-Plate Drill Jigs for DA100&150 \ DLE111 \ ...5 Reviews
HobbyKing
EDF DUCTED FAN UNIT 3BLADE 1.89INCH 48MM
Blade 1.89inch 48mm mm Made from ..." />
| Blade Diameter | 48mm / 1.89inch |
| Recomended Motor | 120-180 (7.4~11.1v) |
| ESC | 10A |
| Rpm | 4,000kv |
| Power | 150~350g Thrust |
Blade Type:3, Shaft Size: 2,
EDF Ducted Fan Unit 3Blade 1.89inch 48mm mm Made from ...5 Reviews
HobbyKing
PROP & BACK-PLATE DRILL JIGS FOR HP-50 \ DA50 \ DLE50 \ DLE55 \ JC51 \ DLE30
*Note*: It is best to drill propeller from the back face. Back out drill several times as you go to clear wood from the bit to ensure a smooth, accurate hole. Do not force the bit through the prop. Place bolt in first hole after drilling to help with alignment when drilling other holes. Please always orientate the prop with blade tips at 9 & 3 o'clock or horizontal to the ground with the compression stroke before drill. In case of dead stick landings this can save your prop and your airframe.,
Prop & Back-Plate Drill Jigs for HP-50 \ DA50 \ ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 2200MAH 3S 35~70C LIPO PACK
| Discharge Plug | XT60 |
: 2200mAh, : 3S1P / 3 Cell / 11.1V, : 35C Constant / 70C Burst, : 199g (including wire, plug & case), : 115x35x27mm, : JST-XH, Suited to the following models:, ALIGN T-REX450, E-flite Blade 450 3D, BEAM E4, MSH Protos Mini, Furion 450, ThunderTiger E325/Mini Titan SE, Caliber 450V, CALIBER 400, RAVE 450, GAUI 330S,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
EDF DUCTED FAN UNIT 6BLADE 2.75INCH 70MM
Blade 2.75inch 70mm This EDF will ..." />
| Blade Diameter | 68.3mm / 2.68inch |
| Outer Case Diameter | 73mm |
| Wall Thickness | 1.53mm |
| EDF Length | 59mm |
| Front Shroud Diameter | 83mm |
| Motor Mount Holes | (from 18mm & 22mm) |
| Shaft Size | 4mm |
Blade Type:6,
EDF Ducted Fan Unit 6Blade 2.75inch 70mm This EDF will ...5 Reviews
HobbyKing
RCG 30CC GAS ENGINE W/ CD-IGNITION 3.9HP/2.94KW
| Displacement | 30cc |
| Carburettor | Walbro type |
| Prop Speed | 1500 ~ 9000rpm |
| Max power | 3.9hp / 2.9kw |
| Power Supply | 4.8-6v |
| Lubrication oil | 2 cycle engine oil |
| Bore/Stroke | 36mm x 30mm |
Weight:, 980g (Including ignition and muffler), Suggested prop:, 18x8, 18x10, 19x8, 20x8 (standard two blade prop), Ignition:, DC-CDI (computer controlled auto advance electric ignition system), Mixture:25:1 to 40:1,
With its easy starting characteristics and reliable low-maintenance running the ...5 Reviews
HobbyKing
RCG 15CC GAS ENGINE W/ CD-IGNITION 2.1HP/1.54KW
| Displacement | 15cc |
| Carburettor | Walbro type |
| Prop Speed | 1500 ~ 9800rpm |
| Max power | 2.1hp / 1.54kw |
| Shaft diameter | 8mm |
| Power Supply | 4.8-6v |
| Lubrication oil | 2 cycle engine |
| Bore/Stroke | 31mm x 26mm |
Weight:, 825g (Including ignition and muffler), Suggested prop:, 15x6 7800rpm (standard two blade prop), Ignition:, DC-CDI (computer controlled auto advance electric ignition system), Mixture:25:1 to 40:1,
With its easy starting characteristics and reliable low-maintenance running the ...5 Reviews