HobbyKing
TURNIGY DLUX 10A (10~60V) HV SBEC
| Adjustable Low Voltage Alarm | 10~60V |
| Input | bare leads / Output |
| Dimensions | 15.7 x 31 x 54mm |
| Weight | 45g |
Features:, • Stable, reliable power supply for your servos/receiver, Specs:, Input Voltage:, 3~14S Lipoly (10~60V), Output Voltage:, 5.2V/6.0V/6.8V/7.4V/8.4V selectable, Output Current:, 10A @ 6V continuous (15A @ 6V peak), Switch Type:, Fail Safe (fail safe on) pin-flag contactless type, Power Connector:,
The Turnigy dlux 10A HV switching BEC provides up to ...5 Reviews
HobbyKing
TRACKSTAR 1/10 AND 1/12TH SCALE PAN CAR SET-UP SYSTEM
,
The TrackStar 1/10 and 1/12th Pan Car Set-up System is ...HobbyKing
TURNIGY MARINE 180A BRUSHLESS BOAT ESC
| Brake | (none/soft/hard) |
| Constant Current | 180A |
| Burst Current | 360A |
| Battery | 2-6S |
| BEC | 5.8v/ 3A |
| Size | 72 x 68 x 34mm |
| Weight | 165g |
Resistance: ., Motor Type:, Sensorless Brushless,
TURNIGY marine ESCs are built with USA IR mosFETs for ...5 Reviews
HobbyKing
TURNIGY FATBOY 300A ESC 5~15S - (OPTO)
| BEC | No BEC (Opto) |
| Size | 19cm x 12cm x 4.9cm |
| Weight | 850g |
Voltage:, 18.5V-55.5V (5s-15s Lipo), Current:, 300A (380A surge within 10 seconds),
Our largest ESC yet! the Turnigy Fatboy speed controller is ...3 Reviews
HobbyKing
TURNIGY TRACKSTAR 120A BRUSHLESS SHORT COURSE TRUCK ESC
| Cont. Current | 120A |
| Burst Current | 760A |
| Car Size | 1/10th~1/8th |
| Battery | 2~4 Cell Lipo |
| BEC | 6V / 5A Output |
| Size | 55 x 37.6 x 38.5mm |
| Weight | 87g |
| On/Off Switch | Yes |
| Reverse | Yes |
| Cooling Fan | Yes |
| Thermal Overload Protection | Yes |
| Fail Safe Mode | Yes |
| Motor Terminals | 3.5mm bullet |
:, Motor Type:, Sensorless Brushless, Programming Options:, (can use stick programming or optional program card),
The Turnigy TrackStar 120A Short Course ESC is the latest ...5 Reviews
HobbyKing
HOBBYKING SS SERIES 90-100A ESC
| Weight | 85g |
| Size | 70x50x13mm |
| Cells | 2-7S Li Po |
| Max Current | 90A [over 70A use 6S only] |
| Burst | 100A |
| Timing | 1/7/15/30 programmable |
| PWM | 8/16K |
| BEC | opto |
| Brake setting 4 options | Direction and Cutoff Type |
| Timing Mode Setting | 1 / 7 / 15 / 30 |
| PWM setting | 8K/16K |
Note:, This ESC is OPTO, with no BEC supplying power to your receiver. You will need an extra power source for your receiver. (such as UBEC or Rx battery pack),
The Hobbyking SS series comes with a limited range of ...5 Reviews
HobbyKing
TURNIGY K-FORCE 40A BRUSHLESS ESC
| 2 Pole | 210,000rpm |
| 6 Pole | 70,000rpm |
| 12 Pole | 35,000rpm |
| Weight | 38g. |
| *Multiple protection features | Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection |
Specification:, Output:, Continuous 40A, burst 57A up to 10 seconds., Input Voltage:, 2-6 cells lithium battery or 5-18 cells NIMH battery., BEC:, Twin voltage selection, 5.25v and 6v., Control Signal Transmission:, Optically coupled system., Size:, 59mm (L) * 27mm (W) * 12mm (H)., Features:, *High performance microprocessor (24khz) brings out the best compatibility with all kinds of motors and the highest driving efficiency.,
The Turnigy K-Force series are based on an all new ...5 Reviews
HobbyKing
TURNIGY DLUX 250A HV 14S 60V ESC
| Note | This in an OPTO ESC you will require an external BEC or Receiver battery. |
| Max Cont Current | 250A |
| Max Burst Current | 275A |
| BEC | N/A (OPTO) |
| LiPo | 6~14S |
| NiMH | 18~42cells |
| Weight | 456grams |
| Max RPM (2-pole) | 200,000rpm |
| Size | 135 x 77 x 50mm |
| Battery Plug | Nil |
| Battery Type | Lixx / Nimh |
| Default factory settings | Brake |
| Battery | LiPo Auto Detect |
| Low Voltage Cut | 3.2v (power down motor) |
| Timing | Auto |
| Frequency | 8KHz |
Specs:, Motor Plug:, Female 6mm bullet Connector, Features:, Low Internal Resistance, Programming Options:,
Turnigy® dlux ESCs have set a new bench mark in ...5 Reviews
HobbyKing
TURNIGY AQUASTAR WATER COOLED ESC PROGRAM BOX
| Forward Limit | 50% ~ 100% |
| Reverse limit | 50% ~ 100% |
| Drive Frequency | 8Khz, 16Khz |
| Rotation | Normal, Reverse |
| Defaults | No, Yes |
Programming Options:, Battery Type:, Lipo Auto Detect, NiCD, NiMH, Operation Mode:, Forward/Reverse, Forward Only, Acceleration:, Low Medium, High, Very High,
Turnigy AquaStar Water Cooled ESC Program Box5 Reviews
HobbyKing
HOBBYKING XP 3A 1S 0.7G BRUSHLESS SPEED CONTROLLER
| Max Voltage | 4.2v |
| BEC | Not required. power supplied directly from 1S battery. |
| Programable | Yes |
| Weight | 0.7g |
| Dimensions | 11x13x8mm |
Cont. Current: 3A, Burst Current: 4A,
HobbyKing XP 3A 1S 0.7g Brushless Speed Controller The HK ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR 150A 1/8TH SCALE BRUSHLESS CAR ESC
| Cont. Current | 150A |
| Burst Current | 250A |
| Car Size | 1/8th |
| Battery | 2-6 Cell Lipo |
| S-BEC | 5.7V / 3A Output |
| Weight | 88g |
| Battery Plug | Required |
| On/Off Switch | Yes |
| Reverse | Yes |
| Thermal Overload Protection | Yes |
| Battery Terminals | 10AWG size |
| Motor Terminals | 10AWG size |
Specification:, Motor Type:, Sensorless Brushless, Size:, 48.8 x 57.8 x 35.8mm,
The Turnigy TrackStar 1/8th scale 150amp car ESC is the ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR ONE CELL 120A 1/12TH AND 1/10TH SCALE SENSORED BRUSHLESS CAR ESC
| Cont. Current | 120A |
| Burst Current | 200A |
| Motor Rotation | Fwd/Rev or Fwd/Brk |
| Thermal Overload Protection | Yes |
| Weight(Without wires) | 34g (1.20oz) |
Specification:, Input Power (Cells):, 1-2S LiPo/LiFe, 3-6 NiMH (8.4V Max), Motor Type:, Sensored and sensorless Brushless Motors., BEC Output:, 6.0V, 1Amp, Built-in BEC with DC booster for 1 cell LiPo use., Status LED (2 LEDs):, White LED, 3 color LED (Red, Green & Orange), Dimensions (L*W*H/without fan):, 36.5*42*18mm (1.44*1.65*0.71in), 1S LiPo or 3-4S NiMH):, ≥3.5T (1/12 on- road), 2S LiPo or 5-6S NiMH):, ≥4.5T (1/10 on-road) ≥6.5T (1/10 off-road) *, Note:, * 2S Lipoly use requires installation of the supplied heat sink and fan.,
The Turnigy TrackStar One Cell 1/12th and 1/10th scale ESC ...5 Reviews
HobbyKing
HOBBYKING YEP 80A (2~6S) SBEC BRUSHLESS SPEED CONTROLLER
| • Anti sparking circuit | reduces connection sparks (for HV ESC) |
| Max Cont Current | 80A |
| Max Burst Current | 100A for 10 seconds |
| PWM | 8~16 KHz |
| PCB Size | 50x30mm |
Features:, • Powerful 5.5V/6A Switching BEC, Specification:, Input Voltage:, 2-6 cells li-XX or 6-16 Ni-MH/Ni-Cd battery, BEC:, 5.5V/6A Switching BEC, Max RPM:, 240,000rpm for 2 Poles Brushless Motor, Weight:, 70g (including wires),
We are now proud to offer our Hobbyking YEP ESC ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR 1/10 45A SENSORLESS CAR ESC
| Cont. Current | 45A |
| Burst Current | 90A |
| Car Size | 1/10th |
| Battery | 2-3 Cell Lipo |
| S-BEC | 5.0V / 2A Output |
| Size | 40.5 x 37.5 x 24mm |
| Weight | 45g |
| Battery Plug | Required |
| On/Off Switch | Yes |
| Reverse | Yes |
| Thermal Overload Protection | Yes |
| Battery Terminals | 14AWG size |
| Motor Terminals | 14AWG size |
Specification:, Motor Type:, Sensorless Brushless (2s 8.5turn, 3s 13.5turn - or higher), Programming Options:, (Via Optional programming card),
The Turnigy TrackStar 1/10th scale 45amp car ESC is the ...5 Reviews
HobbyKing
TURNIGY AE-20A BRUSHLESS ESC
| Output | Continuous 20A, burst 25A up to 10 seconds. |
| Input Voltage | 2-4 cells lithium battery or 5-12 cells NIMH battery. |
| BEC | Linear 2A @ 5V |
| Control Signal Transmission | Optically coupled system. |
| Max Speed | 2 Pole |
| 6 Pole | 70,000rpm |
| 12 Pole | 35,000rpm |
| Size | 50mm (L) * 26mm (W) * 12mm (H). |
| Weight | 19g. |
| Multiple protection features | Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection |
| Factory default settings | Brake |
| Battery type | Li-xx (Li-ion or Li-Po) |
| Low voltage cutoff threshold | Soft cut-off (2.6V) |
| Timing setup | Low |
| Soft Acceleration Start Up | Normal |
| Low voltage cutoff type | Medium |
Specification:, Features:, High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency., Programming features:, Brake setting (we recommend using brake for only folding props applications),
The Turnigy AE series are based on new powerful microprocessor. ...5 Reviews