SDSHobby
HOBBYWING UBEC-3A
| Output Voltage | 5V or 6V (Changeable with an output-voltage select switch ) |
| Continuous output current | 3 Amps |
| Input | 5.5V-23V (2-5 cells lithium battery pack or 5-15 cells NiMh /NiCd battery) |
| Size | 42mm*17mm*7mm (length*width*height) |
| Weight | 11g |
Description:, The 3A-UBEC is a switch-mode DC-DC regulator supplied with a 2-5 cells lithium battery pack (or 5-15 cells NiMh /NiCd battery) and it outputs a consistent safe voltage for your receiver, gyro and servos. It is very suitable for RC helicopter. Compared with the linear mode UBEC, the overall efficiency of the switch-mode UBEC is higher., Specification:,
Features ï1⁄4š Designed with an advanced switch mode DC-DC regulator ...SDSHobby
HIGH PERFORMANCE 1.2KG/ 9G SERVO SH009
| Dimensions (mm) | 23.4(L)*12.2(W)*22(H) |
| Operating Speed (4.8V) | 0.12sec/60 degrees |
| Stall Torque (4.8V) | 1.2Kg/cm |
| Connector Wire Length | 180mm |
Weight: 9g,
High Performance 9g servoSDSHobby
IMAX B8 PROFESSIONAL INTELLIGENT BALANCE CHARGER/DISCHARGER DC 11-18V WITH ALUMINUM BOX
| Operating Voltage Range | DC11~18.0 Volt |
| Charge Circuit Power | Max. 150W |
| Discharge Circuit Power | Max. 20W |
| Charge Current Range | 0.1~7.0A |
| Discharge Current Range | 0.1~5.0A |
| Current drain for balancing Li-Po | 300mAh / cell |
| NiCd / Ni-MH Battery Cell Count | 1~27 cells |
| Lithium Battery(LiPo, LiFe, Li-lon) Cell Count | 1~8 Series |
| Pb Battery Voltage | 6 to 36V |
| Weight | 500 g |
| Dimensions | 160*120*40 mm |
Specifications:, Feature:,
Optimized user interface Delta-peak sensitivity, temperature limit, capacity limit, temperature ...SDSHobby
IMAX B3 EASY COMPACT BALANCE CHARGER/BUILT-IN AC ADAPTER
| splay the process of charging (RED | charging; GREEN |
SDSHobby
IMAX B6AC MULTIFUNCTIONAL BALANCE CHARGER /BUILT-IN AC ADAPTER
| - Operating voltage | DC11.0~18.0 Volt |
| - AC in | 100V~240V 50/60Hz |
| - Charge current range | 0.1~5.0A |
| - Discharge current range | 0.1~1.0A |
| - Current drain for balancing Li-Po | 300mAh/cell |
| - NiCd/NiMN Battery count | 1~15cell |
| - Li-Po cell count | 1~6cell |
| - Pb battery voltage | 2V~20V |
| - Weight | 531g (net weight) |
| - Dimensions | 134 x 142 x 36 mm |
This product includes:, - IMAX B6-AC charger,
IMAX B6AC Professional Balance Charger / Discharger (Built-in AC Power ...SDSHobby
KDS-N690 4.5KG/49G DIGITAL SERVO/ TAIL SERVO WITH PLASTIC GEARS FOR KDS550 600/ 700/ HELICOPTERS
| Output Torque | 4.0kg.cm at 4.8V, 4.5kg.cm at 6.0V; |
| Speed | 0.07sec/60 at 4.8V, 0.06sec/60 at 6.0V; |
| Working Voltage | DC 4.8V-6V |
| Working Temperature | -20 |
| Weight | 49g |
| Dimension | 47x20x38mm |
Specifications:, Applications: could be used as tail servo for KDS550 600/ 700/ Helicopters or other branded 550 600/ 700/ series helicopters,
℃ - 60 ℃SDSHobby
KV4811 380-2858 FSD BRUSHLESS INRUNNER MOTOR FOR RC CAR/RC BOAT/RC HELICOPTER
| KV (rpm/v) | 4811 |
| Shaft Diameter (mm) | 3.15 |
| Shaft Length (mm) | 12.4 |
| Total Weight (g) | 220 |
| Max. Power (w) | 700 |
| Resistance (KΩ) | 0.0069 |
| Idle Current (A) | 4.4 |
| Application Fields | model helicopters, boats and cars |
Specifications:, Motor Diameter (mm): 28, Motor Length (mm): 57, Wire Length (mm): 66, The number of Poles: 2, Wire Winds: 6, Max. Current (A): 70, Cells Ni-Cd/Ni-MH: 6S, Cells Li-Po: 2S, ESC:≥,
Recommend Equipments (need to buy separately) 70ASDSHobby
LEOPARD 2835-10T KV850 OUTRUNNER BRUSHLESS MOTOR FOR FIXED-WING AIRPLANE
| KV Value(RPM/V) | 850 |
| Banana Plug Diameter(mm) | 3.5 |
| No-load Current(A) | 0.9 |
| Continuous Current (A) | <18 |
| Pull(KG) | 1.1 |
| Internal Resistance (ohm) | 0.1455 |
| Li-Po Battery | 2-4S |
| Propeller | 10-11 inch |
Specification:, Motor Diameter(mm): 28, Motor Length(mm): 35, Extended Shaft Length(mm): 12, Extended Shaft Diameter(mm): 4, Max Load Current (A): 22, Weight(g): 68, Recommended Equipments (need to buy separately):, ,
SDSHobby
LEOPARD OUTRUNNER BRUSHLESS MOTOR 2826/9T/KV1820 FOR RC MODEL AIRPLANES
Specifications:, Motor Diameter (mm):, 8, Motor Length (mm):, 6, KV (RPM/V):, KV1820, No Load Current:, 1.1A, Max Loading Current:, 15A, :, <13, Shaft Diameter (mm):, 3.175, Shaft Length:, , Pull (kg):, 0.85, :, , Cells of Lipo:, S, Resistance (ohm):, 0.061, Weight:, 45g,
Cont. Current (A) 12mm Suggested Propeller (Not included) 8 '-9'SDSHobby
LI-PO SAVER 4 CELL (12V)
Character:, How to use:,
The power is exhausted completely when the voltage of per ...SDSHobby
LIPO BATTERY PROTECTOR FOR CAR
| Low voltage cut-off threshold for each battery unit | 2.6V, 2.85 or 3.1V. |
| Tolerance | 0.05V |
| * Note | This function is only valid for AM, FM/PPM receiver, not valid for PCM receiver. |
The protector concentrates three functions in one unit:, , Size:, 32mm(L) * 18mm(W) * 9mm(H), Weight:5, Battery Type:, cells lithium battery pack, Deep discharge supervision and protection:, ,
Deep discharge supervision and protection Battery voltage measurement Abnormal throttle ...SDSHobby
LI-PO REGULATOR 4.8V (5A)
Characters:,
The regulator will change the battery's voltage into the voltage ...SDSHobby
MALE TAMIYA CONNECTOR + CROCODILE CLIP WITH 16AWG SILICONE WIRE L150MM
Specifications for Silicone Wire:, Wire Length:, 150mm, Wire Type:, 16AWG, Cores of Copper Wire:, 52 cores,
SDSHobby
MAX FORCE 35C 2600MAH 6-CELL/6S 22.2V LI-PO BATTERIES FOR T-REX 500
| Max Charging Current | 5C/13A |
| Max Cont. Discharging Current | 35C/91A |
| Max Burst Discharging Current | 70C/182A |
| Application Fields | for T-REX 500, 600(double), etc. |
| Size | L135*W43*H33mm |
| Plug Type | Deans Plug and Balance Chargeable Plug |
Specifications:,
SDSHobby
MAX FORCE 35C 2200MAH 2-CELL/2S 7.4V LI-PO BATTERIES
| Max Charging Current | 5C/11A |
| Max Cont. Discharging Current | 35C/77A |
| Max Burst Discharging Current | 70C/154A |
| Size | L106*W34*H15mm |
| Net Weight | 122g |
| Plug Type | Deans Plug and Balance Chargeable Plug |
Specifications:,