SDSHobby
VB NI-MH POWER BATTERY 1500MAH 4.8V 4S STANDARD PACKS FOR RC CAR RC BOAT
| Battery type | Ni-MH Power Battery |
| Capacity | 1500mAh |
| Voltage | 4.8V |
| Size (L*W*H) | 67*17*32mm |
| Net weight (g) | 100 |
| Connector type | FUTABA male connector |
| Discharge current | 5-10C |
| Application | RC car, RC boat |
Specifications:,
SDSHobby
CNC ALUMINUM RADIO HOLDER BLUE COLOR
Features:,
Precisely CNC machined with high quality aluminum Material Makes this ...SDSHobby
CHARGING CABLE L425MM WITH CROCODILE HEAD
| Cable Type | 2468 #22 |
| DC Plug Type | 5.5/2.1 |
Specifications:,
SDSHobby
C6374 SERIES MOTOR SHAFT D10MM WITH CIRCLIP
| L2 (Overall Length) | 98mm |
| L1 (Short End) | 24.5mm |
| D(Shaft Diameter) | 10mm |
| L3 x L4 (Groove) | 4.5 x 6.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
C6354 MOTOR MOUNT/ MOUNTING SEAT FOR MOTOR
Application Fields:, Suitable for motors with diameter=63mm, length=54mm.,
SDSHobby
C5045 MOTOR MOUNT/ MOUNTING SEAT FOR MOTOR
Application Fields:, Suitable for motors with diameter=50mm, length=45mm.,
SDSHobby
C3548 MOTOR MOUNT/ MOUNTING SEAT FOR MOTOR
Application Fields:, Suitable for motors with diameter=35mm, length=48mm.,
SDSHobby
D1000-PRO BALANCE CHARGER OUTPUT 20A/50W
Specifications:, DC Input Voltage Range:, 11.0-32.0V, Input Charge Current Range:, 0.1-40.0A, Charge Power Limited:, max. 1000W, Output Discharge Current Range:, 0.1-20.0A, Output Discharge Power Limited:, max. 50W, Energy Transfer Discharge:, max. 1000W, Balance Socket Charge Current:, 1.0A, Balance Tolerance:, ±, Ni-Cd/Ni-MH Battery Cell Count:, 1-26S, Lithium Battery Types:, LiPo, Li-ion, Li-Fe, Lithium Battery Cell Count:, 1-8 series, Pb Battery Voltage:, .0-36.0V, Digital Power:, 3.0-32.0V, Operational System:, graphical display,
0.01VSDSHobby
DYNAM USB 4 CH SIMULATOR LEFT HAND
| Product Name | USB Simulator |
| Pleaser note | On a system with only minimum system requirements,the |
Minimum system requirements:, -100% Pentium III or AMD Athlon/64 compatible, Recommended system requirements:, -100% Pentium IV or AMD 64 compatible processor with at least 1600Mhz,
processor with at least 800Mhz -128MB RAM -1GB free hard ...SDSHobby
DYNAM USB 4 CH SIMULATOR RIGHT HAND
| Product Name | USB Simulator |
| Pleaser note | On a system with only minimum system requirements,the |
Minimum system requirements:, -100% Pentium III or AMD Athlon/64 compatible, Recommended system requirements:, -100% Pentium IV or AMD 64 compatible processor with at least 1600Mhz,
processor with at least 800Mhz -128MB RAM -1GB free hard ...SDSHobby
BRUSHLESS MOTOR WS2838 3650KV FOR KDS450 HELICOPTER
Specification:, Motor Diameter (mm):, 8.3*38.3mm, Shaft Diameter:, 3.175, KV:, 3650, Input Voltage:, 7.4~14.8V, Max. Current:, 45A, Weight:, 78, Features:,
mm rpm/v g Brushless Motor KDS-WS2838 is a light maintenance-free ...SDSHobby
FSD 130-2030 KV7782 INRUNNER BRUSHLESS MOTOR FOR HELICOPTER/ RC CAR/ RC BOAT
Specification:, ):, 7782, Motor Diameter (mm):, 0, Motor Length (mm):, 30, Shaft Diameter (mm):, .3, Banana Plug Diameter(mm):, 3.5, Shaft Length (mm):, 12.5, Total Weight (g):, 50, Max Power (W):, 130, Number of Windings:, 12, Resistance (ohm):, 0.0325, Max Current (A):, 18, No-load Current(A):, .2, Number of Poles:, Efficiency:, 90%, Recommended Equipments (need to buy separately):, Ni-Cd/Ni-MH Battery:, 6S, Li-Po Battery:, S,
KV ( RPM/VSDSHobby
FUTABA S3001 4.1KG/45G STANDARD ANALOG SERVO WITH BALL BEARINGS
Specifications:, No Loading Speed:, 0.28sec/60 degrees at 4.8V ;, Stall Torque:, .4kg.cm at 4.8V ;, Dimensions:, 40.5×20×36.1mm, Weight:, 45.1g, Interface Type:, JR, Bearing Type:, Ball Bearing, Gear Type:, All Nylon Gears, Connector Wire Length:, 305mm, Current Drain (4.8V):, 7.2mA/idle, Current Drain (6.0V):, 8mA/idle, Operating Voltage:, 4.8-6.0 Volts, Operating Temperature Range:, -20 to +60 Degree C, Operating Angle:, 45 Deg. one side pulse traveling 400usec, Features:,
0.22sec/60 degrees at 6.0V 3kg/cm at 6.0V This is a ...