HobbyKing
NTM PROP DRIVE 50-60 SERIES 380KV / 2665W
| Max current | 90A |
| Shaft | 8mm |
| Weight | 468g |
| ESC | 100A |
| Cell count | 6s~8s Lipoly |
| Bolt holes | 30mm |
Specs:, Model:, NTM Prop Drive Series 5060 380kv, Kv:380rpm/v, Poles:7, Max Power:, 2665W @ 30v (8S) / 2000W @ 22v (6S), Bolt thread:M4, Connection:, 4mm Bullet-connector, Prop Tests:, 17x8 - 25.9v - 1900W - 73.5A - 7.03kg thrust, Note:, An accessory pack is available for this motor. Please see the related items below.,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...3 Reviews
HobbyKing
NTM PROP DRIVE SERIES 28-26A 1200KV / 250W (SHORT SHAFT VERSION)
| Max current | 18A |
| Shaft | 3mm |
| Weight | 57.6g |
| ESC | 20A |
| Cell count | 3s~4s Lipoly |
| Bolt holes | 16mm & 19mm |
| Note | An accessory pack is available for this motor. Please see the related items below. |
Specs:, Model:, NTM Prop Drive Series 28-26A 1200kv (short shaft version), Kv:1200rpm/v, Max Power:, 200W @ 12v (3S) / 250W @ 15v (4S), Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Tests:, 7x6E - 11.1v - 90W - 8A,
This is a short shaft version of our popular NTM ...5 Reviews
HobbyKing
TURNIGY MULTISTAR 4830-480KV 22POLE MULTI-ROTOR OUTRUNNER
| KV(RPM/V) | 480 |
| Max Surge Watts(W) | 680 |
| Working current | 22 amps |
| Max.current(10s) | 31 amps |
| No Load Current | 1.2 amps |
| Intemal Resistance | 0.062 ohm |
| Dimensions(Dia.xL) | 47.5 x 33 mm |
| Shaft | 6 mm |
| Prop | 14 x 4-15 x 5 |
| Weight | 154g |
Spec:, Lipo cells:6s, Number of Poles:22,
Looking for the ultimate power system for your next Multi-rotor ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR WATERPROOF 1/10 BRUSHLESS POWER SYSTEM 4250KV/80A
| Features | ESC |
| Continuous Current | 80A |
| Burst Current | 95A |
| Resistance | 0.0009ohm |
| BEC output | 6V/1A |
| Dimension | 43 x 38 x 20mm |
| Weight | 88g |
| Model | 3650 Sensorless |
| Cont Current | 50A |
| Peak Current | 70A |
| Max Power (15sec) | 720W |
| Resistance | 0.0196ohm |
| Weight | 205g |
| Diameter | 36mm |
| Length | 53mm |
| Shaft Diameter | 3.175mm |
• Multiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection., ESC Specs:, Battery:, 2-3 cells Lipo (5-8 cells NI-xx), Motor type:, Sensorless brushless motors, Running mode:, Forward only or forward with reverse (user programmable mode), Motor Specs:, Kv:4250, No. of Poles:4, Winding:1Y, Includes:, 80A Sensorless Brushless ESC,
An extremely powerful brushless system for any 1/10 or 1/12 ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR WATERPROOF 1/8 BRUSHLESS POWER SYSTEM 2300KV/120A
| Features | ESC |
| Continuous Current | 120A |
| Burst Current | 140A |
| Resistance | 0.00035ohm |
| BEC output | 6V/3A |
| Dimension | 43 x 39 x 33mm |
| Weight | 141g |
| Model | 4365 Sensorless |
| Cont Current | 80A |
| Peak Current | 140A |
| Max Power (15sec) | 1680W |
| Resistance | 0.0065ohm |
| Weight | 315g |
| Diameter | 43mm |
| Length | 66mm |
| Shaft Diameter | 5mm |
• Multiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection., ESC Specs:, Battery:, 2-4 cells Lipo (6-14 cells NI-xx), Motor type:, Sensorless brushless motors, Running mode:, Forward only or forward with reverse (user programmable mode), Motor Specs:, Kv:2300, Winding:2D, Includes:, 120A Sensorless Brushless ESC,
An extremely powerful brushless system for any 1/8 scale truck, ...5 Reviews
HobbyKing
DR MAD THRUST 1000KV 4600WATT 90MM EDF INRUNNER 8-10S VERSION (40MM)
| RPM/V | 1000kv |
| Voltage | 8-10s |
| Max current | 110A |
| Max Power | 4600 watts |
| High Blade Count | 32000rpm |
| Low Blade Count | 37000rpm |
| Diameter | 40mm |
| Front Mounting Hole Distance | 25mm |
| Shaft Diameter | 5mm |
| Shaft Length | 12mm |
| Plug type | Bullet-Connector |
| Weight | 380g |
Specs:, Poles:4, Front mount Thread Size:M3,
Introducing our Doctor Mad Thrust High performance EDF motor series. ...5 Reviews
HobbyKing
DR MAD THRUST 3300KV 1100W 64MM EDF INRUNNER MOTOR 4S VERSION (29MM)
| RPM/V | 3300kv |
| Voltage | 2-4s |
| Max current | 70A |
| Max Power | 1100 watts |
| High Blade Count | 43000 |
| Low Blade Count | 48000 |
| Diameter | 29mm |
| Front Mounting Hole Distance | 19mm |
| Shaft Diameter | 3.17 |
| Shaft Length | 10mm |
| Weight | 138g |
Specs:, Poles:4, Front mount Thread Size:M3, Plug type:, Bullet-Connector 3.5mm,
Introducing our Doctor Mad Thrust High performance EDF motor series. ...5 Reviews
HobbyKing
TURNIGY HELIDRIVE SK3 COMPETITION SERIES - 4962-530KV (700/.90 SIZE HELI)
| Voltage | 12S Lipoly |
| RPM/V | 530kv |
| Internal resistance | 0.019 Ohm |
| Max Loading | 90A |
| Max Power | 3900W |
| Shaft Diameter | 6mm |
| Shaft Length | 32mm |
| Screw Mounting Spacing | 25mm |
| Weight | 452g |
Turns:9T, Motor Poles:10, Motor Plug:, 4mm Bullet Connector,
Turnigy SK3 Competition Series motors are the newest addition to ...HobbyKing
TURNIGY TRACKSTAR 1/10 10T 3900KV BRUSHLESS
| Max Voltage | 13v |
| Max current | 42 amps |
| Watts | 550 |
| Resistance | 0.0155 Ohms |
| Max RPM | 50000 |
| Length | 50mm |
| Diameter | 35.8mm |
| Shaft dia. | 3.175mm |
| Shaft length | 15mm |
| Weight | 168g |
:, Kv:3900,
Trackstar 3900Kv (10.0 Turn) sensorless brushless inrunner to suit 1/10 ...5 Reviews
HobbyKing
AX-4008Q-620KV BRUSHLESS QUADCOPTER MOTOR
| Can size | 45mm |
| Shaft | 4mm |
| Suggested ESC | 70A |
| Weight | 88g |
| Cell count | 4~5S Lipoly |
Specs:, Kv:620rpm/v, Rated Watts:, 1000W @ 18.5V, 800W @ 14.8V,
If you're serious about your quadcopter's performance, look no further ...5 Reviews
HobbyKing
HEXTRONIK DT1000 BRUSHLESS OUTRUNNER 1000KV
| Required Voltage | 11.1v |
| Max current draw | 35A |
| Max power | 500W |
| No Load Current | 1.2A |
| Shaft | M4 (perfectly suited to Towerpor/GWS SF Slow Fly props) |
| Weight | 115g |
| Diameter | 41mm |
| Overall length | 66mm |
: 1000rpm/v,
Looks can be deceiving. This outrunner is around twice the ...3 Reviews
HobbyKing
XK2430-4500KV BRUSHLESS INRUNNER
| Max Amps | 22A |
| Max Volt | 8.4V |
| Max Watts | 184W |
| Rpm/V | 4500kv |
| Resistance | 0.101 ohms |
| No-load Current | 1.9A |
| Dimension | 24mm x 30.0mm |
| Mounting hole depth | 4.5mm |
| Length of extend Shaft | 12mm |
| Shaft diameter | 2mm |
| Weight | 46g |
# of poles:4,
XK2430-4500KV Brushless Inrunner Specs.5 Reviews
HobbyKing
TURNIGY GLIDERDRIVE SK3 COMPETITION SERIES - 3858 - 4.6 840KV
| Turns | 10T |
| Voltage | 3~5S Lipoly |
| RPM/V | 840kv |
| Internal resistance | 0.031 Ohm |
| Max Loading | 45A |
| Max Power | 830W |
| Shaft Diameter | 5mm |
| Shaft Length | 20mm |
| Mounting screw Spacing | 25mm (M3x4) |
| Connector | 3.5mm bullet |
| Weight | 180g |
Specs:, Motor Poles:14,
Turnigy SK3 Competition Series motors are the newest addition to ...5 Reviews
HobbyKing
TURNIGY AX-2804C 1400KV/80W BRUSHLESS OUTRUNNER MOTOR
| KV(RPM/V) | 1400 |
| Max Current | 10A |
| Max Power | 80W |
| No Load Current | 0.5A |
| Internal Resistance | 0.1 ohm |
| Shaft Size | 3.0mm |
| Dimensions (Dia x L) | 33 x 24mm |
| Bolt Hole Spacing | 36 x 36mm |
| Bolt Thread | 2.5mm |
| Suggested ESC | 15A |
| Prop Fitting | Prop saver type |
| Weight | 30g |
| 8 x 3.8 2 Blade | Voltage |
| Current | 7.3A |
| Watts | 53W |
| Thrust | 285g |
| 6 x 4 2 Blade | Voltage |
| Current | 3.4A |
| Watts | 25W |
| Thrust | 122g |
Specs :, Lipo Cells:2S, Number of Poles:12, Prop Tests:,
Turnigy AX-2804C 1400KV/80W A high quality compact and lightweight brushless ...