HiModel
XERUN-80A BRUSHLESS ESC FOR 1/8 CAR/TRUCK
| Model | XERUN-80A |
| Cont./ Burst Current | 80A / 380A |
| Resistance | 0.0006 ohm |
| Suitable Car | 1/8 on-road, off-road and monster RTR applications |
| Suitable motors | Sensored and sensorless Brushless Motors |
| Battery | 6-12 cells NiMH or 2-4 cells Li-Po |
| BEC Output | 5.75V@3A Switch mode built-in BEC |
| Dimension | 58mm(L) * 46.5mm(W) * 35mm(H) |
| Weight | 105g (Wires not included) |
| Cooling Fan Working Voltage | 5V, maximum 8V. (The fan gets the power supply from the built-in BEC) |
, , , , , , Specifications:, , , , , , , , , , , 【SPECIFICATIONS】, ≥6T, KV≤2400 (Works with 4S Lipo), , ,
Features: ► Compatible with all sensorless brushless motors and most ...HiModel
XERUN-150A BRUSHLESS ESC FOR 1/8 CAR
| Model | XERUN-150A |
| Cont./ Burst Current | 150A/950A |
| Resistance | 0.0002 ohm |
| Suitable Car | 1/5, 1/8 on-road, off-road and monster, Super powerful applications |
| Suitable motors | Sensored and sensorless Brushless Motors |
| Battery | 6-18 cells NiMH or 2-6 cells Li-Po |
| BEC Output | 5.75V@3A Switch mode built-in BEC |
| Dimension | 58mm(L) * 46.5mm(W) * 35mm(H) |
| Weight | 105g (Wires not included) |
| Cooling Fan Working Voltage | 5V, maximum 8V. (The fan gets the power supply from the built-in BEC) |
, , , , , , Specifications:, , , , , , , , , , , 【SPECIFICATIONS】, ≥4.5T, KV≤ 3000 (Works with 4S Lipo) or, ≥6T, KV≤2400 (Works with 6S Lipo), , ,
Includes/Requires: Includes:1 x ESC 1 x ESC cooling fan (integrated) ...HiModel
SKYRC LEOPARD 60A BRUSHLESS SPEED CONTROL FOR 1/10 CAR
| Input | NiMH 6 cells & LiPo 2-3 cells |
| Output | Max 360 Watt 54A at 25 C |
| BEC | 5V, 2A |
| Net Weight | 72g |
| Dimension | 48x33x29mm |
, , , , , , Specifications:, , , , , , , , , , , Motor Support: KV , , ,
Features: Leopard 60A ESC is high performance 1:10 Scale Brushless ...HiModel
TORO MICRO 25A BRUSHLESS SPEED CONTROL FOR 1/18 CAR
| Input Power (Cells) | 2-3S LiPo |
| Brake | Proportional |
| On Resistance, Brushless | 0.002 Ohm |
| Continuous / Burst Current | 25 Amp / 90Amp |
| Linear BEC | 5 Volts, 1 Amp |
| Dimension | 30x26.1x13.8mm |
| Weight | 26g |
, , , , , , Specifications:, , , , , , , , , , , Specifications:, , ,
Features: TORO Micro high performance sensorless 1/18 Scale Brushless Motor ...HiModel
HIMODEL ICE 100A 2-6S WATER-COOLED BRUSHLESS NAVY ESC ICE-100A
, , , , , , Specifications:, , , , , , , , , , , HiModel ICE Series Boat ESC W/Water cooling, , Model, , Continuous Current（A）, , Cell Number (Lipo), , BEC Mode, , BEC Output, , PCB Dimension (L*W), , Connector, , Wire Length（MM）/Gauge, , Signal Wire Length（MM）, , 60A, , 60A, , 2—6, , Switch, , 5.5V/6A, , 50MM*30MM, , NO, , 120 14#, , 300, , 80A, , 80A, , 2—6, , Switch, , 5.5V/6A, , 50MM*30MM, , NO, , 120 14#, , 300, , 100A, , 100A, , 2—6, , Switch, , 5.5V/6A, , 50MM*30MM, , NO, , 120 12#, , 300, , 150A, , 150A, , 2—6, , Switch, , 5.5V/6A, , 50MM*30MM, , NO, , 120 10#, , 300, , 60A-HV, , 60A, , 4—12, , NO, , NO, , 50MM*30MM, , NO, , 120 14#, , 300, , 100A-HV, , 100A, , 4—12, , NO, , NO, , 50MM*30MM, , NO, , 120 12#, , 300, , 120A-HV, , 120A, , 4—14, , NO, , NO, , 68MM*53MM, , NO, , 120 10#, , 300, , 180A-HV, , 160A, , 4—14, , NO, , NO, , 68MM*53MM, , NO, , 120 10#, , 300, , , ,
Features: HiModel ICE 100A Water-cooled Brushless Navy ESC ICE-100A Includes/Requires: ...HiModel
SEAKING-35A WATERPROOF BRUSHLESS ESC FOR BOATS W/WATER-COOLING SYSTEM
| ● Output | Continuous current 35A, burst current 190A. |
| ● Input | 4-12 cells NiMH/NiCd or 2-4 cells LiPo. Note1 |
| ● BEC Output | 6V/1.5A. |
| ● Resistance | 0.0015 Ohm. |
| ● Motor Supported | Sensorless Brushless Motor |
| ● External diameter of the water cooling pipe | 4.0mm |
| ● Size | 31.5mm(L) * 27.5mm(W) * 24mm(H). |
| ● Weight | 30g(Without wires) |
| For 4-9 cells NiMH/NiCd or 2-3 cells Lipo | You needn’t change anything of the ESC. |
| For 10-12 cell NiMH/NiCd or 4 cell Lipo | You must disable the output of built-in BEC, and use a 3A UBEC to supply the receiver. |
, , , , , , Specifications:, , , , , , , , , , , Note1:, Programmable Items:, , ,
Features: Features: ●Compatible with all sonsorless brushless motor. ●Use top ...HiModel
HIMODEL 2200MAH 11.1V LITHIUM POLYMER (TX) BATTERY FOR TRANSMITTERS
| Size | 95x30x18mm |
| Weight | 114g / 4.03 oz |
| Capacity | 2200mAh |
| Voltage | 11.1V |
| Connector | FUTABA AND JR standard |
, , , , , , Specifications:, , , , , , , , , , , HiModel 2000mAh 11.1V 15C Lithium Polymer (TX) Battery for Transmitters, , ,
Features: Specially designed to use as replacement of TX Ni-Mh/Ni-Cd ...2 Reviews
HiModel
XT60 SERIAL CONNECTION CABLE
| Wire gauge | 12AWG |
, , , , , , Specifications:, , , , , , , , , , , XT60 Serial Connection Cable, * Color of XT60 connector shells may differ., , ,
Features: Typical application: connect two batteries with XT60 connectors in ...HiModel
XT60 PARALLEL CONNECTION CABLE 12AWG
| Wire length | 10CM (excluding connectors) |
| Wire gauge | 12AWG |
, , , , , , Specifications:, , , , , , , , , , , XT60 Parallel Connection Cable 12AWG, , ,
Features: Typical application: connect two batteries in XT60 connectors in ...HiModel
MAXPRO 2-6S LCD LITHUM BATTERY DETECTOR LCD-6
| 1. Voltage measurement range | 2~6s Lipo/Li-ion/LiMn |
| 2. Voltage display resolution | 0.01V. |
| 3. Unit voltage display range | 3.00~4.5V, Total voltage display range |
| 5. Pin distance | 2.54mm |
| 6. Size | 81x45x10mm, Weight |
, , , , , , Specifications:, , , , , , , , , , , 4. Current loading of test: , * Input total voltage should be 4.8 to 27V, if the total voltage is under 4.8V, there is no display on the LCD. IF the unit voltage is above 27V, it will hurt the LCD-6., , ,
Features: 1. For RC model battery diagnosis and measurement use. ...HiModel
XH MULTI-ADAPTER BALANCE HARNESS 2S-6S FOR CHARGER B6
| Charging port | 2S-6S |
, , , , , , Specifications:, , , , , , , , , , , XH Adaptor, , ,
Features: XH Multi-adapter Balance Harness 2S-6S for Charger B6 Includes/Requires: ...HiModel
MULTI-ADAPTER BALANCE HARNESS 2S-10S - TP CONNECTOR FOR CHARGER 1010B+
| Row A | 2x 2S; 1 x 2S/3S |
| Row B | 2 x 3S; 1 x 2S/3S |
| Row C | 1 x 3S; 1 x 4S/5S |
| Row D | 1 x 4S; 1 x 4S/5S |
| Row E | 1 x 5S; 1 x 4S/5S |
, , , , , , Specifications:, , , , , , , , , , , Multi-adapter Balance Harness 2S-10S - TP CONNECTOR for Charger 1010B+, Charging port:, For battery higher than 5S to be charged via two ports., Also compatible with other batteries using same connectors as TP, like FLIGHT POWER / EVO, APEX, VISLERO etc., , ,
Features: Multi-adapter 2-10S balance harness with TP (Thunder Power) connector, ...HiModel
MULTI-ADAPTER BALANCE HARNESS 2S-6S - HIMODEL/ALIGN CONNECTOR FOR CHARGER 1010B+
| Row A | 3 x 2S |
| Row B | 3 x 3S |
| Row C | 2 x 4S |
| Row D | 2 x 5S |
| Row E | 1 x 6S |
, , , , , , Specifications:, , , , , , , , , , , Multi-adapter Balance Harness 2S-6S - HiModel/Align Connector for Charger 1010B+, Charging port:, , ,
Features: Multi-adapter 2-10S balance harness with HiModel/Align connector, specially designed ...HiModel
MULTI-ADAPTER BALANCE HARNESS 2S-6S - HIMODEL/ALIGN CONNECTOR FOR CHARGER 206B
, , , , , , Specifications:, , , , , , , , , , , Multi-adapter Balance Harness 2S-6S - HiModel/Align Connector, suit for, icharger 206B charger, ., , ,
Features: Multi-adapter Balance Harness 2S-6S - HiModel/Align Connector for Charger ...HiModel
MULTI-ADAPTER BALANCE HARNESS 2S-6S - HIMODEL/ALIGN CONNECTOR FOR CHARGER 208B
, , , , , , Specifications:, , , , , , , , , , , Multi-adapter Balance Harness 2S-6S - HiModel/Align Connector, suit for, icharger 208B charger, ., , ,
Features: Multi-adapter Balance Harness 2S-6S - HiModel/Align Connector for Charger ...