HobbyKing
TURNIGY AERODRIVE SK3 - 3548-700KV BRUSHLESS OUTRUNNER MOTOR
| Turns | 12T |
| Voltage | 4~5S |
| RPM/V | 700 |
| Internal resistance | 0.035 Ohm |
| Max Loading | 45A |
| Max Power | 665W |
| Shaft Dia | 5.0mm |
| Bolt holes | 25mm |
| Weight | 177g |
Bolt thread:M3, Motor Plug:, 4mm Bullet Connector,
Turnigy SK3 Motors are the next leap forward in motor ...5 Reviews
HobbyKing
TURNIGY AERODRIVE SK3 - 3530-1150KV BRUSHLESS OUTRUNNER MOTOR
Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today. The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent winding each and every time. The Turnigy SK3 motors are suited to modelers who are seeking a quality brushless motor without compromise. Specs.Turns: 28TVoltage: 3~4S LipolyRPM/V: 1150kvInternal resistance: 0.069 OhmMax Loading: 24AMax Power: 330WShaft Dia: 4.0mmBolt holes: 25mmBolt thread: M3Weight: 76gMotor Plug: 3.5mm Bullet Connector,
5 Reviews
HobbyKing
TURNIGY AERODRIVE SK3 - 3530-1340KV BRUSHLESS OUTRUNNER MOTOR
| Turns | 24T |
| Voltage | 2~3S |
| RPM/V | 1340 |
| Internal resistance | 0.052 Ohm |
| Max Loading | 28A |
| Max Power | 375W |
| Shaft Dia | 4.0mm |
| Bolt holes | 25mm |
| Weight | 76g |
Bolt thread:M3, Motor Plug:, 3.5mm Bullet Connector,
Turnigy SK3 Motors are the next leap forward in motor ...5 Reviews
HobbyKing
AX 2306N 2000KV BRUSHLESS MICRO MOTOR
| Lipo Range | 2-3 cell |
| Suggested prop | 5x3 |
| Best current range | 6~9A |
| Weight | 37g |
| Battery | 11.5v |
| Current | 7.3A |
| Propeller | 5x3 |
| Thrust | 357g |
| Speed | 19340rpm |
Kv: 2000rpm/v, : 23 x 6mm,
AX-2306N-2000 Micro brushless motor Comes with stick mount, as shown. ...5 Reviews
HobbyKing
NTM PROP DRIVE 2830 SERIES REPLACEMENT SHAFT
| Shaft length | 41mm |
| Shaft diameter | 3mm |
5 Reviews
HobbyKing
NTM PROP DRIVE 3536B SERIES REPLACEMENT SHAFT
| Shaft length | 72mm |
| Shaft diameter | 4mm |
5 Reviews
HobbyKing
NTM PROP DRIVE 3530 SERIES REPLACEMENT SHAFT
| Shaft length | 53mm |
| Shaft diameter | 4mm |
5 Reviews
HobbyKing
TRACKSTAR 1/18TH SCALE 7.5T BRUSHLESS POWER SYSTEM (6100KV)
| Cont. Current | 18A |
| Burst Current | 25A |
| Car Size | 1/18th |
| L-BEC | 5V / 1A Output |
| Size | 30 x 26.1 x 13.8mm |
| Motor Plugs | 3.5mm Bullet type |
| Battery Plug | Required |
| On/Off Switch | Yes |
| Reverse | Yes |
| Turns | 7.5T |
| KV value | 6100KV |
| Diameter | 21.5mm |
| Motor length | 37mm |
| Extend shaft diameter | 2mm |
| Length of extend shaft | 11±0.5mm |
| Weight | 60g |
| 7.2V | 2.7A |
| Max current | 40A |
| Resistance (Ω) | 0.021Ω |
| Battery range | 2~3s 7.4v~11.1v |
| Operation Temperature | 80° |
| Suitable car scale | 1/18 |
| Suitable ESC | 25A |
| Thickness of lamination | 0.2X20mm |
ESC Specification:, Battery:, 2-3 Cell Lipo / 4-9 Cell Ni-XX, Motor Type:, Sensorless Brushless, Weight:, 26g (Including wires), Motor Specifications:, Poles:4, NOTE:, We suggest reducing your gearing if running this motor on 3S.,
TrackStar performance now in comes in easy to select Combo ...5 Reviews
HobbyKing
LONG PROP ADAPTER W/ ALU CONE 3MM MOTOR SHAFT (GRUB SCREW TYPE)
| Prop Shaft | 5mm x 23mm |
5 Reviews
HobbyKing
SCORPION HK-2221-6 BRUSHLESS OUTRUNNER
| Stator Diameter | 22.0 mm (0.87 in) |
| Stator Thickness | 21.0 mm (0.83 in) |
| Motor Wind | 6 Turn Delta |
| Motor Wire | 20-Strand 0.21mm |
| Motor Kv | 4400 RPM / Volt |
| Motor Resistance (Rm) | 0.016 Ohms |
| Max Continuous Current | 52 Amps |
| Max Continuous Power | 525 Watts |
| Weight | 81 Grams (2.86 oz) |
| Outside Diameter | 27.9 mm (1.098 in) |
| Shaft Diameter | 3.17 mm (0.125 in) |
| Body Length | 38.3 mm (1.508 in) |
| Overall Shaft Length | 58.7 mm (2.311 in) |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
No. of Stator Arms:9, Magnet Poles:6, No-Load Current (Io):, 2.89 Amps @ 10 volts, Max Lipo Cell:3s,
Scorpion HK Series Brushless Motors are built from the best ...5 Reviews
HobbyKing
TURNIGY 1/8TH SCALE 4 POLE BRUSHLESS MOTOR - 1900KV
| This motor is a perfect match for the Turnigy 160A 1 | 8th Scale Sensorless ESC, check out the related items below. |
| Turns | 2.5D |
| RPM/v | 1900 |
| Voltage | 3~5s Lipoly |
| Continuous Current | 70A |
| Peak Current | 120A |
| Resistance | 7.4mΩ |
| No Load Current | 3.0A |
| Dimension | 43 x 63.4mm |
| Shaft Length | 20mm |
| Shaft Diameter | 5mm |
| Weight | 220g |
Poles:4,
Purpose built for the high torque demands of 1/8th scale ...5 Reviews
HobbyKing
M4 X 60MM STAND-OFFS (GREEN)
,
M4 x 60mm Stand-offs for Gas Engines (Green)5 Reviews
HobbyKing
NTM PROP DRIVE 4238 SERIES REPLACEMENT SHAFT
| Shaft length | 60mm |
| Shaft diameter | 5mm |
5 Reviews
HobbyKing
TURNIGY HELIDRIVE SK3 COMPETITION SERIES - 4962-480KV (700/.90 SIZE HELI)
| Turns | 12T |
| Voltage | 12S Lipoly |
| RPM/V | 480kv |
| Internal resistance | 0.023 Ohm |
| Max Loading | 90A |
| Max Power | 3800W |
| Shaft Diameter | 6mm |
| Shaft Length | 32mm |
| Screw Mounting Spacing | 25mm |
| Weight | 448g |
Motor Poles:10, Motor Plug:, 4mm Bullet Connector,
Turnigy SK3 Competition Series motors are the newest addition to ...5 Reviews
HobbyKing
NTM PROP DRIVE 50-50 580KV / 2000W
| Max current | 90A |
| Max Power | 2000W @ 22.2v (6S) |
| Shaft | 8mm |
| Weight | 347g |
| ESC | 100A |
| Cell count | 4s~6s Lipoly |
| Bolt holes | 30mm |
Specs:, Model:, NTM Prop Drive Series 50-50 580kv, Kv:580rpm/v, Bolt thread:M4, Connection:, 4mm Bullet-connector, Prop Test Data:, 14x8 - 14.8V / 587W / 40.3A / 2.9kg thrust,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews