SDSHobby
MAX FORCE 20C 1300MAH 2-CELL/2S 7.4V LI-PO BATTERIES
| Max Charging Current | 5C/6.5A |
| Max Cont. Discharging Current | 20C/26A |
| Max Burst Discharging Current | 40C/52A |
| Net Weight | 80g |
| Size | L75*W32*H17mm |
| Plug Type | Deans Plug and Balance Chargeable Plug |
Specifications:, Kindly Remark:, Pictures for reference only, because the product constantly upgrade, so the appearance of the few products maybe small change, but the technology parameters is perfectly, quality is guaranteed.,
SDSHobby
MINI SERVO SECTIONBOARD POWER BOX FOR GAS PLANE WITH 20A UBEC
| 1.Working voltage | 7-13V |
| .Steering current, voltage | 0-20A,4.8-9 .7 V (factory voltage is 5.2V) |
| 3.Weight | 80g |
| 4.Volume | 116mm(long)*88mm(wide)*13mm(height) |
| 5.Working temperature | -20°C to 85°C. |
Description:, The product is mainly used for the servo with large regular vane’s airplane, such as gasoline engine. This product can distribute several strings’ power. The sectionboard integrates CDI remote flameout swiches and reserves position for receiver, which make servo’s lines convenient and tidiness. If you use double powers input to the power supply, it will be more stable and more security., Technology Parameters:, Features:, 1. Eight channels for input, and sixteen channels for output.(every one channel input with two channels output ),
. Integrates CDI remote flameout switches. Through each channel of ...SDSHobby
MOTOR/ ESC FOR HELICOPTER KDS450Q
Specification:, , Application:, suitable for,
Helicopter KDS450QSDSHobby
MAX FORCE 25Cˆ•4400MAHˆ•6S1P/ 22.2V LIPO BATTERY FOR 600 HELICOPTER
| Max Charging Current | 5C/22A |
| Max Cont. Discharging Current | 25C/110A |
| Max Burst Discharging Current | 45C/198A |
| Size | H59*W43*L135mm |
| Net Weight | 635g |
| Plug Types | T Plug |
| Application | for 600 helicopter |
Specifications:, Kindly Remark:, Pictures for reference only, because the product constantly upgrade, so the appearance of the few products maybe small change, but the technology parameters is perfectly, quality is guaranteed.,
ï1⁄4‹ Balance Chargeable PlugSDSHobby
MICROPEAK AC 110V 4-8 CELL CHARGER (0.75A-1.5A)
| Selectable Charge rate | AC 4-8 Cell |
Specification:, Switching transfer (low heat dissipation),
For charging 4-8 cell Ni-Cd and Ni-MH batteries START switch ...SDSHobby
N2826 SERIES MOTOR SHAFT D3MM WITH CIRCLIP
| L2 (Overall Length) | 41mm |
| L1 (Short End) | 12mm |
| D(Shaft Diameter) | 3mm |
| L3 x L4 (Groove) | 4.5 x 2.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
N2830 SERIES MOTOR SHAFT D3MM WITH CIRCLIP
| L2 (Overall Length) | 45mm |
| L1 (Short End) | 12mm |
| D(Shaft Diameter) | 3mm |
| L3 x L4 (Groove) | 4.5 x 3mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
N3536 SERIES MOTOR SHAFT D4MM WITH CIRCLIP
| L2 (Overall Length) | 57.5mm |
| L1 (Short End) | 18.5mm |
| D(Shaft Diameter) | 4mm |
| L3 x L4 (Groove) | 4.5 x 3mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
N3548 SERIES MOTOR SHAFT D5MM WITH CIRCLIP
| L2 (Overall Length) | 69.6mm |
| L1 (Short End) | 18mm |
| D(Shaft Diameter) | 5mm |
| L3 x L4 (Groove) | 4.5 x 3mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
N4250 SERIES MOTOR SHAFT D4.87MM WITH CIRCLIP
| L2 (Overall Length) | 70mm |
| L1 (Short End) | 21mm |
| D(Shaft Diameter) | 4.87mm |
| L3 x L4 (Groove) | 5.5 x 3.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
N5045 SERIES MOTOR SHAFT D8MM WITH CIRCLIP
| L2 (Overall Length) | 66mm |
| L1 (Short End) | 23mm |
| D(Shaft Diameter) | 8mm |
| L3 x L4 (Groove) | 6 x 5.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
N5055 SERIES MOTOR SHAFT D8MM WITH CIRCLIP
| L2 (Overall Length) | 76mm |
| L1 (Short End) | 23mm |
| D(Shaft Diameter) | 8mm |
| L3 x L4 (Groove) | 4.5 x 5.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
N5065 SERIES MOTOR SHAFT D8MM WITH CIRCLIP
| L2 (Overall Length) | 86mm |
| L1 (Short End) | 23.5mm |
| D(Shaft Diameter) | 8mm |
| L3 x L4 (Groove) | 6 x 5.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,