HobbyKing
NTM ROTOR DRIVE 450 SERIES 3400KV / 500W
| Max Cont. Current | 30A |
| Burst Current (5 sec) | 46A |
| Max Power | 500W @ 11.1V |
| Shaft | 3.5mm |
| Weight | 96g |
| Cell count | 3s Lipoly |
| Bolt holes | 16mm x 16mm |
Specs:, Model:, NTM Rotor Drive Series 2938 3400kv, Kv:3400rpm/v, Poles:3, Bolt thread:M2, Connection:, 3.5mm Bullet-connector,
NTM Rotor Drive, our latest addition to the NTM performance ...5 Reviews
HobbyKing
BL 2030-16 BRUSHLESS INRUNNER MOTOR 5800KV
| Battery | 2S/7.4V (42900 rpm) |
| RPM | 5800kv |
| No load current | 1.2A |
| Weight | 49g |
| Diameter of shaft | 2mm |
| Length of front shaft | 12mm |
Spec:, Dimension:, 20mm x 32mm, 48mm(with shaft),
BL 2030-16 Brushless Inrunner Motor 5800kv Suited for Mini EDF ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR 1/10 12.0T 3300KV BRUSHLESS MOTOR
| Max Voltage | 15v |
| Max current | 35amps |
| Watts | 550 |
| Resistance | 0.0221 |
| Max RPM | 50000 |
| Length | 50mm |
| Diameter | 35.8mm |
| Shaft dia. | 3.175mm |
| Shaft length | 15mm |
| Weight | 168g |
Specs:, Kv:3300,
Trackstar 3300Kv (12.0 Turn) sensorless brushless inrunner to suit 1/10 ...5 Reviews
HobbyKing
SCORPION COMPETITION SERIES HKIII-4020-1100KV 500 HELI OUTRUNNER
| Motor Kv | 1100 RPM / Volt |
| Recommended Timing | 5 Degrees |
| Recommended PWM Frequency | 8Khz |
| Max Continuous Current | 78 Amps |
| Max Continuous Power | 1640 Watts |
| Peak Current (5 Seconds) | 90 Amps |
| Peak Power (5 Seconds) | 1890 Watts |
| Motor Resistance (Rm) | 0.008 Ohms |
| Stator Diameter | 40.0 mm |
| Stator Thickness | 20.0 mm |
| Motor Wind | 3-4 Turn Delta |
| Motor Wire | 24-Strand 29Awg |
| Outside Diameter | 49.9 mm |
| Shaft Diameter | 4.98 mm |
| Body Length | 46.8 mm |
| Overall Shaft Length | 78.7 mm |
| Weight | 302g |
Specs:, Max Li-Po Cell Count:6s, No-Load Current (Io):, 3.15 Amps @ 10 volts, No. of Stator Arms:12, No. of Magnet Poles:10,
The Scorpion HKIII-4020 motors follows in the footsteps of the ...HobbyKing
TURNIGY MULTISTAR 4822-390KV 22POLE MULTI-ROTOR OUTRUNNER
| KV(RPM/V) | 390 |
| Max Surge Watts(W) | 300 |
| Working current | 11 amps |
| Max.current(10s) | 15 amps |
| No Load Current | 0.25 amp |
| Intemal Resistance | 0.17 ohm |
| Dimensions(Dia.xL) | 47.5 x 25 mm |
| Shaft | 6 mm |
| Prop | 12 x 3 - 14 x 5 |
| Weight | 98 g |
Spec:, Lipo cells:6s, Number of Poles:22,
Looking for the ultimate power system for your next Multi-rotor ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR WATERPROOF 1/10 BRUSHLESS POWER SYSTEM 5200KV/80A
| Features | ESC |
| Continuous Current | 80A |
| Burst Current | 95A |
| Resistance | 0.0009ohm |
| BEC output | 6V/1A |
| Dimension | 43 x 38 x 20mm |
| Weight | 88g |
| Model | 3650 Sensorless |
| Cont Current | 56A |
| Peak Current | 68A |
| Max Power (15sec) | 450W |
| Winding | 12T |
| Resistance | 0.007ohm |
| Weight | 180g |
| Diameter | 36mm |
| Length | 53mm |
| Shaft Diameter | 3.175mm |
• Multiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection., ESC Specs:, Battery:, 2-3 cells Lipo (5-8 cells NI-xx), Motor type:, Sensorless brushless motors, Running mode:, Forward only or forward with reverse (user programmable mode), :, Kv:5200, No. of Poles:2, Includes:, 80A Sensorless Brushless ESC,
An extremely powerful brushless system for any 1/10 or 1/12 ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR WATERPROOF 1/10 BRUSHLESS POWER SYSTEM 3520KV/80A
| Features | ESC |
| Continuous Current | 80A |
| Burst Current | 95A |
| Resistance | 0.0009ohm |
| BEC output | 6V/1A |
| Dimension | 43 x 38 x 20mm |
| Weight | 88g |
| Model | 3650 Sensorless |
| Cont Current | 40A |
| Peak Current | 60A |
| Max Power (15sec) | 660W |
| Resistance | 0.0172ohm |
| Weight | 205g |
| Diameter | 36mm |
| Length | 53mm |
| Shaft Diameter | 3.175mm |
• Multiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection., ESC Specs:, Battery:, 2-3 cells Lipo (5-8 cells NI-xx), Motor type:, Sensorless brushless motors, Running mode:, Forward only or forward with reverse (user programmable mode), Motor Specs:, Kv:3520, No. of Poles:4, Winding:2D, Includes:, 80A Sensorless Brushless ESC,
An extremely powerful brushless system for any 1/10 or 1/12 ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR WATERPROOF 1/8 BRUSHLESS POWER SYSTEM 1900KV/120A
| Features | ESC |
| Continuous Current | 120A |
| Burst Current | 140A |
| Resistance | 0.00035ohm |
| BEC output | 6V/3A |
| Dimension | 43 x 39 x 33mm |
| Weight | 141g |
| Model | 4365 Sensorless |
| Cont Current | 70A |
| Peak Current | 120A |
| Max Power (15sec) | 1470W |
| Winding | 1.5Y |
| Resistance | 0.010ohm |
| Weight | 315g |
| Diameter | 43mm |
| Length | 66mm |
| Shaft Diameter | 5mm |
• Multiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection., ESC Specs:, Battery:, 2-4 cells Lipo (6-14 cells NI-xx), Motor type:, Sensorless brushless motors, Running mode:, Forward only or forward with reverse (user programmable mode), Motor Specs:, Kv:1900, Includes:, 120A Sensorless Brushless ESC,
An extremely powerful brushless system for any 1/8 scale truck, ...5 Reviews
HobbyKing
DR MAD THRUST 2200KV 1600W 70MM EDF INRUNNER 6S VERSION (29MM)
| RPM/V | 2200kv |
| Max current | 80A |
| Max Power | 1600 watts |
| High Blade Count | 41000 |
| Low Blade Count | 46000 |
| Diameter | 29mm |
| Front Mounting Hole Distance | 19mm |
| Shaft Diameter | 3.17 |
| Shaft Length | 10mm |
| Weight | 174g |
Specs:, Voltage:6s, Poles:4, Front mount Thread Size:M3, Plug type:, Bullet-Connector 3.5mm,
Introducing our Doctor Mad Thrust High performance EDF motor series. ...5 Reviews
HobbyKing
DR MAD THRUST 1620KV 2400WATT 90MM EDF INRUNNER 6S VERSION (36MM)
| RPM/V | 1620kv |
| Voltage | 2-6s |
| Max current | 100A |
| Max Power | 2400 watts |
| High Blade Count | 32000 |
| Low Blade Count | 37000 |
| Diameter | 36mm |
| Front Mounting Hole Distance | 25mm |
| Shaft Diameter | 5mm |
| Shaft Length | 13mm |
| Weight | 317g |
Specs:, Poles:4, Front mount Thread Size:M3, Plug type:, Bullet-Connector 4mm,
Introducing our Doctor Mad Thrust High performance EDF motor series. ...5 Reviews
HobbyKing
TURNIGY AERODRIVE SK3 6354 SERIES REPLACEMENT BALL BEARING SET (3PCS/BAG)
,
Turnigy Aerodrive SK3 6354 Series Replacement Ball Bearing Set (3pcs/bag) ...HobbyKing
NTM 28 MOTOR MOUNT SPACER/STAND OFF 5MM (4PCS)
,
NTM 28 Motor Mount Spacer/Stand Off 5mm (4pcs)5 Reviews
HobbyKing
NTM 35 MOTOR MOUNT SPACER/STAND OFF 5MM (4PC)
,
NTM 35 Motor Mount Spacer/Stand Off 5mm (4pc)HobbyKing
NTM 35 MOTOR MOUNT SPACER/STAND OFF 2MM (4PC)
,
NTM 35 Motor Mount Spacer/Stand Off 2mm (4pc)HobbyKing
TURNIGY TRACKSTAR 1/5TH SENSORLESS BRUSHLESS MOTOR 760KV
| Size | 53.5x114mm |
| RPM/v | 760kv |
| Max voltage | 30V (8S) |
| Max Current | 160A |
| Max Watts | 4800W |
| Resistance | 0.011ohm |
| Shaft Size | 12mm |
| Bolt hole spacing | 30mm x 4, M4 |
| Can Diameter | 53.5mm |
| Can Length | 114mm |
| Weight | 1143g |
Features:, • Compatible with any Sensorless ESC, Specs:, Poles:4,
The Turnigy TrackStar Brushless Motors offer outstanding performance at an ...5 Reviews