ngHobbies
4 Channel Video Switch
http | //www.vimeo.com/4449555 |
- Additional safety feature: In case the RC signal is lost, the device will switch back to Input 1 after about 2.5 seconds. The rationale behind this is the following: In case you have a forward and a backward facing camera, and you loose RC control while looking backwards, the device will switch back to the forward facing camera (assuming that this is connected to Input A) in order to allow you to look forward and resume flying the plane with forward view once you regain control. This feature is always useful to notify you that you are dangerously close to loose RC control of your plane., Demo Video :, Manual:, Setup and Utilization Manual,
The 4 Channel Video switch will allow you to switch between any type of four 12V camera/video sources using your RC transmitter. This version has been developed, tested and modified and proven to work with any type of camera used for FPV as well as video sources coming from Digital Cameras.
The switch has some nice in-built features in order to make the use of this device much more enjoyable.
- It allows you to use it on a singel or dual chnnel operation mode;
- There is a safety feature built in, which will allow the switching to occur only after it received 5 valid switching signal pulses. This happens in about 100ms, so one cannot notice this timeframe, but it is enough for the device to prevent accidental switching caused by an RC glitch.
- This switch can be used with either 12V or 5V cameras - but all cameras have to be the same voltage.
Check price and availability
Found 10 years ago