ReadyMadeRC
FY-41AP-A Airplane Stabilizer, Autopilot, and On Screen Display
FY-41AP firmware for fix-wing V1.22 | Download |
FY module firmware upgrade software and manual | Download |
The latest FY-DOS&41AP-SETTING software V1.11 for fix-wing | Download |
FY-41AP manual for fix-wing | Read online |
More FY-41AP related downloads | Click in |
FY-41AP OSD display part firmware V1.22a | Download |
FY module firmware upgrade software and manual | Download |
Supported servo output | 50Hz refresh frequency |
Recommended Transmitter | PCM or 2.4GHz with minimum 6 channels |
FY-41AP Module Working Voltage | 5.3V@0.2A( Powered by Power Manager) |
Air speed senor | 0 ~ 200KM/h |
Power Manager | 35g(50×24×18mm) |
Working Voltage Range | Power of battery 7~26V (2S ~ 6S) |
Measuring current | 0~100A |
Power for FY-41AP module | 5.3V@2A |
Power for Video transmission system | 12V@2A |
Operating Temperature | -10°C ~ 50°C |
Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer, 3 axis magnetometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude, earth azimuth & relative altitude to achieve:, - Extremely stable conventional flight pattern, > Related download for fix-wing :, Reminder from Feiyu-tech: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART1 is the interface connects to the data radio, PC computer serial port to do the firmware upgrade for FY-41AP control module.If you want to upgrade the firmware of FY-41AP OSD module,please, Integrated OSD Video Overlay System, FY-41AP overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more., Feiyu tech kindly remind you: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART2 is the interface connects to the PC computer serial port to do the firmware upgrade for FY-41AP OSD module.If you want to upgrade the firmware of flight control part ,please, :, 1, Normal / Traditional fixed-wing planes;, Assistant Software System Require,
Introduction
FY-41AP is an inertial attitude measurement instrument used for FPV flight on fixed-wing aircrafts and multi-rotors aircrafts. It has an integrated OSD video overlay system that presents critical flight information such as power management, airspeed, altitude, and flight direction via its electronic compass, allowing for a clear visual flight while ensuring key information is within sight.
- Stabilized 3D flight
- Automatically return to home (RTL)
- Fixed altitude flight
- Heading lock flight
- GPS waypoint flight
- Auto circling over a fixed GPS location.
Function Introduction
● Deactivated Mode
—— In this mode, the FY-41AP auto stabilization is turned off. The aircraft is completely under pilot control.
● Stabilized Mode
—— Level flight is automatically maintained, making flight simple, especially for beginners. If a pilot feels the plane is out of control, simply reduce input control and the plane will automatically recover level flight.
● 3D Mode
—— If no input is given by the pilot (all sticks in the middle position), 3D mode will lock the current aircraft attitude. Therefore the aircraft can be easily maneuvered to complete a variety of 3D flight with added stability & smoothness.
● Fixed altitude & Heading lock Mode
—— This mode maintains aircraft flight course & holds the altitude on activation. By using GPS data, the system automatically corrects flight course deviation & maintains straight-line flight.
● FWaypoint Navigation Flight Mode
—— Enable you to fly fully autonomous, with up to 20 waypoints settings via the FY Ground Control Station (GCS) software.
● Auto Return To Launch Mode (RTL)
—— Upon activation of this Mode, the aircraft will automatically return to the Home point, maintaining its current altitude. Upon reaching the Home point, it will initiate auto circling.
It is necessary to read the upgrade instructions carefully before upgrade and use.】
|
Download
click on here
OSD Video Overlay System Function
● First Person View (FPV)
—— FY-41AP has an integrated OSD video overlay system that presents critical flight information on the video for easy enjoy FPV, at the same time, Auto stable, Fixed altitude & Heading lock, Waypoint Navigation , Auto Return To Home function will make FPV operation easier.
OSD is an essential part for FPV. The FY-41AP can adapt both PAL and NTSC video signals. The entire adaptive process is completed approximately within 1 second.
click on here
Basic Performance
Supported aircraft
2, Delta-winged plane with rudder;
3, Delta-winged plane without rudder;
4, Plane without aileron;
5, V-tail plane with aileron;
6, V-tail plane without aileron;
Flight Performance
Hardware
>
GCS Ground Station Software (Requires additional hardware for real time links)
GCS ground station software, used to set the flight parameters, mission planning, monitoring in flight. Software integration of electronic map function can through the map software the Google earth live map out into the GCS software. The main function is
• Parameter Settings —
Control parameters setting, course setting, etc.
• Real time monitoring —
It can monitor flight attitude. And via the GCS software you can change the flight altitude in real time and realize the mouse click flight.
• Record and monitoring flight —
You can monitor and download flight path via the GCS software in your computer.
|
Download
More versions of the GCS software, please
click in
Check price and availability
Found 6 years, 1 month ago