RCModelScout.

HobbyWireless

HORNET OSD + FY-31AP FLIGHT STABILIZER SYSTEM, GPS AUTO-PILOT FUNCTIONS

Details:, FY-31AP, By using your remote control, the FY-31AP can be turned on or off for the following functions:, , The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, , • FY-31AP module:, , • GPS module:, , The FY-31AP can be installed in the following aircraft :, , Any other configuration , please e-mail us for enquiry:, service@feiyu-tech.com, The FY-31AP has been tested to work with the following RC systems:, , The telemetry data is as below:, , Relative altitude (Unit : m), Operating temperature(Unit: ℃), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes  separately are as following:, , The modes are shown as below:,

Attitude Flight Stabilization System (AFSS)

1. Attitude Flight Stabilization System (AFSS)

FY31-AP is an inertial attitude measurement instrument used for automated stabilization of fixed wing model aircrafts and simple three axis camera gimbals.

FY31-AP has an integrated three-axisgyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space.

2. Barometric Sensing and GPS

FY-31APcontrol module incorporates an accurate barometric pressure sensor. At start up, the take-off air pressure is measured, providing the autopilot with an accurate relative height data.

While the GPS module enables the autopilot to calculate the flight course and exact location of the aircraft. If the FY31AP is not connected GPS module, the autonomous flight system cannot be engaged and it will function purely as a flight stabilizer.

After connecting the GPS and booting up, the FY-31AP will search for GPS positioning signals, the first time the GPS positioning successfully and the satellites quantity at least 4, then the FY-31AP will remember this position as the home point

3. Functions of FY-31AP

• Level flight
- When stabilization is activated, the FY31AP will automatically control the aircraft for smooth easy flying. For beginners in RC aircraft  flying, this is advantages as it makes flight easier and increases the student pilot self-confidence. The system can be activated throughout the entire flight duration, from take off to landing.

•Emergency Recovery
- If you lose orientation release all control sticks, maintain throttle and switch ON the FY31AP.The unit will automatically send the correct signals to balance of the aircraft and regain level flight, giving you time to get your orientation and fly the plane back to safety.

• Autonomous flight
- with the GPS module the autonomous flight system of the FY31AP will enable you to fly fully autonomous, with up to 8 waypoints settings on the FY Ground Control Station software.

• Ground Control Station
- the FY GCS software will enable you to fly autonomously to up to 8 waypoints, display in-flight telemetry data, and record that flight for replay and analysis (this requires the optional Data Radio hardware).

• Automated circling
- by activating this function, the aircraft will automatically circle the selected area at a fixed altitude, the centre of the circle is the current point. You can set the circling radius, the default radius is 80 meters.

• Return to Home
- You can set autonomous return to home via a 3 way switch or through your failsafe setting, enabling you plane returning to home should it lose your transmitter signal. Upon reaching the home point it will automatically engage auto circling, while it waits for your further instructions.

• First Person View
- for long-distance RC flight via video transmitter, the FY31AP will maintain the balance of your aircraft. You only need to control the heading of your aircraft and enjoy the view.

• Firmware upgrade
- The FY31AP firmware is upgradable by connecting to your computer via a USB TTL cable. As Feiyu Tech continuously improves the FY31AP system, firmware upgrades will be released periodically.

4. Optional Upgrade with FY-OSD and Data Radio

• First Person View (FPV)
-  by connecting this interface to the FY-OSD, telemetric data such as GPS, flight navigation, AHI can be displayed on your downlink video.On the other hand, it will be easier to operate FPV with the functions of automaticbalanceand automated return to home.

• Real time telemetry
- real time by-directional telemetry is monitored directly by your ground station computer. Changes to aircraft altitude and flight path can be controlled from your ground station computer.

• Record and monitor your flight
- you can monitor and download your flight path into your ground station computer.

For more information, please refer to the FY-OSD and FYData Radio manual.

5. FY-31AP Package Content

•  FY-31AP control module *1;

•  GPS receiver *1;

•  RC receiver connecting wires *1;

•  Velcro double sided tape * 2;

•  Some related wire.

•  Instruction manual* 1;

6. Technical Specification and working requirement

7. Application

1. Normal / Traditional fixed-wing planes;

2. Delta-winged planewith rudder;

3. Delta-winged plane without rudder;

4. Plane without aileron;

5. V-tail plane with aileron;

6. V-tail plane without aileron;

8. Remote control system requirement

•
Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems；

•
Graupner/JR PPM 8, PPM 12, SPCM mode；

•
MPX PPM8, PPM 12 with UNI mode

•
Any remote control system using the standard of 1.5 ms neutral position.

FY-31AP - Download installation & operation manual

FY-31AP - Download the latest firmware

HORNET OSD

The Hornet- OSD overlays flight telemetry information onto your video image. The telemetry information displayed includes flight altitude, flight speed, flight direction, and home direction and so on. You also can save the telemetry information to a MICRO SD card (
sold separately
), then realizing trace playback via FYGCS. The Hornet-OSD can be connected to the FY-21AP, FY-31APand FY-3ZT systems to display autopilot telemetric data, or to a GPS receiver to display positioning data.

Hornet-OSD automatically adapts to either PAL or NTSC video input and confirms if there is a MICRO SD card or not. The adaptive processes are within about 20 seconds.

Once the input video is detected even if there is interruption to the video signal, the telemetry data of the Hornet- OSD will continue to be transmitted via the video stream.

Hornet-OSD Download manual

Hornet-OSD - Download the latest firmware

Application

Hornet-OSD  can directly connect to the data output port of FY-21AP, FY-31AP or FY-3ZT, or separately connect to the output port of GPS module, and then overlay the flight data information to the video signal. The application figure is shown as below.

(
Note
：The modules in the imaginary line frame means that you can choose any one of these modules to connect )

Introduction for the flight State of FY-21AP / FY-31AP / FY-3ZT

Name

Introduction

RC

Manual Flight. Autopilot deactivated.

ABM

Auto balance mode

FAF

RTL

Auto Return Mode

ACM

Auto Circle Mode

Interface introduction

1

Attitude measurement error coefficient（refer to the prompt）

11

2

12

Horizon position display

3

13

4

14

5

Flight mode

15

6

16

7

17

The battery power consumed

8

18

‘Radar’ aircraft Position relative to ‘Radar’ Home position

9

The quantity of satellite used for positioning

19

‘Radar’ Home position

10

Display Modes Selection

A. All Information Displayed.

B. Partial Display with Artificial Horizon.

C. Radar Positioning Function.

D. Brief Mode.

E. Remove All Information.

FIRMWARE UPDATE PROCEDURE.
(each step must to be followed in the following order)

1.) Download the firmware upgrade rar file from the website.
2.) Login into ADMINISTRATOR in win 7
3.) Unzip all files into a folder on desktop
4.) Now plug the USB cable in the USB slot.
5.) DO NOT connect the 31AP yet.
6.) Open the upgrade program and choose the correct port. (At this time the 31AP sould not be connected.)
7.) Click "Open Port". this should change the button to "Close port".
8.) CONNECT the USB cable to the 31AP on the UART port. success will display
9.) Click on " Read the version number" to see the current installed firmware
10.) Download the latest firmware
11.) Click n the "Select Fimware button" and find the downloaded latest version file wich should have .bin at the end of the name.
12.) Click on the button " Start Upgrade" then you get the message "Firmware upgrade success"  KEEP YOUR FY31AP CONNECTED FOR ANOTHE 90 SECONDS
13.) Unplug your the USB cable from FY31AP and close the port.
14.) If you want to check if the firmware was updated, then reboot your PC and follow the steps 1-9. (we don't know why, but it works).

Found 11 years, 9 months ago