HobbyWireless
FAT SHARK ATTITUDE SD FPV VIDEO GLASSES + TRANSMITTER KIT
| Power consumption at 7.4V | wired 150mA, wireless 300mA(wired/wireless) |
| Operating Frequencies | 5740 MHz, 5760 MHz, 5780 MHz, 5800 Mhz, 5820 MHz 5840 Mhz 5860 MHz |
| Power required | 7 - 13 V (2S/3S lipo battery) plug |
| Adjustable interpupillary distance | 59 - 69 mm. |
Details:, The Attitude SD came to stay., Specifications:, -90dBm 5.8G 7 channel receiver (new rx AWRX682), Includes:, 1x Attitude SD headset,
Based on the success of it's predecessors the Attitude SD ...HobbyWireless
ANTENNA SKEW PLANAR WHEEL RHCP 5.8 GHZ - SMA MALE
| Working frequency | 5645-5945 MHz |
| Polarization | Right Hand Circular |
| Weight | 5 grams |
| Package contents | 1x Skew Planar Wheel Antenna and right angle SMA adpter. |
Details:, The circularly polarized omnidirectional antenna ideal for use in the video transmitter. Combined with another Skew Planar Wheel at the receiver offers coverage in all directions, with moderate range (around 2Km). Combined with a, Features:, , Connection Type:, SMA Male (center pin), This is especially important in circular polarization. In a simple way: the difference between co-polar component (right hand circular in this case) and cross-polar (left hand circular) is the attenuation that will introduce the antenna to capture the reverse polarization, which will come from the reflected signal that we want to avoid to reduce multipath. In these antennas is bigger than 10dB in all cases, which means that the reflected signal will reach the emitter attenuated at least 10dB with respect to the desired signal, which is great to prevent that it interferes with the desired signal.,
Helical Axial Antenna in the receiver provides around 6Km range. ...HobbyWireless
AN5805 - HIGH GAIN WHIP ANTENNA 5.8 GHZ 5DBI - RPSMA
| transmitters and receivers | FPV585X |
| Product Characteristics | Band |
| Gain | 5dbi |
| Length | 20cm |
| Interface | RP-SMA (female) |
| VSWR | <1.5 |
| Input impedance | 50 ohm |
| Polarization | Vertical |
| Maximum Power | 10W |
| Length | 205mm |
| weight | 29g |
Details:, An excellent omni-directional antenna for use with our 5.8Ghz FPV systems., Note:, This antenna only works with,
This antenna features a tilt-and-swivel RP-SMA (female connector, no center ...HobbyWireless
AN5803 5.8GHZ 3DBI WHIP ANTENNA RP-SMA (FEMALE)
Fatshark . ..." />
| transmitters and receivers | FPV585X |
Details:, This is the replacement for 3dBi 5.8 GHz stock rubber duck antennas for 5.8 GHz,
FPV582X, R5800X, TXV585X and TXV582X, not compatible with ImmersionRC/Fatshark . ...HobbyWireless
5.8 GHZ BLUEBEAM ANTENNA WHIP SET - RHCP SMA MALE
| Weight | 8g (each antenna) |
| Connector | SMA connector |
Details:, The BlueBeam antenna set is a direct fit circularly polarized antenna replacements for your whip antennas., Note:, We recommend to using the BlueBeam antenna for receiver and transmitter for best results.,
These will greatly increase your video range and clarity. Place ...HobbyWireless
5.8 GHZ BLUEBEAM ANTENNA OMNI SET - RHCP SMA MALE
| Weight | 4g (each antenna) |
Details:, The BlueBeam antenna set is a direct fit circularly polarized antenna replacements for your whip antennas., Connector:, SMA connector, Note:, We recommend to using the BlueBeam antenna for receiver and transmitter for best results,
These will greatly increase your video range and clarity. Place ...BevRC
OMWAY 5.8G 400MW TX(COMPATIBLE WITH ALL 5.8G RXS WE SELL)
Fatshark/ImmersionRC(airwave/NexwaveRF) ..." />
| Frequency | 5.8G wide-band FM video/audio tx |
| Power | 400mw |
| Channels | 2 modes |
| Weight | 14g only |
| Sterieo audio | L/R audio channe; |
| Input Voltage | 7-16v |
Specatations:, 5740-5860MHz(7-channel),
This is the first 5.8G solution support both the Fatshark/ImmersionRC(airwave/NexwaveRF) ...BevRC
BEV BLUE 5.8G CLOVERLEAF ANTENNA SET(2 ANTENNAS,SMA,FOLDABLE)
| Frequency Range | 5725-5875Mhz |
| Impedance | 50ohm |
| VSWR | <1.3 |
| Gain | 2dBi |
| Polarization | Right hand circularly polarized |
| Max power input | 20W |
Spec:,
The new batch of CL antennas with foldable cable,easier to ...GetFPV
READY TO FLY QAV500 (RTF)
NOTE: This build does not include Lipos and charger. We recommend 3300mah 4s Nano-Tech Lipos available at HobbyKing., One of the order options includes for us to set up your FPV gear that you add to your order. To build a good FPV gear package, please consider the following components:, ImmersionRC 5.8 600mw Video TX,
Details This is a fully built QAV500 FPV Quadcopter frame. ...GetFPV
READY TO FLY QAV400 (RTF)
NOTE: This build does not include Lipos and charger. We recommend either 2200mah or 3300mah 4s Nano-Tech Lipos available at HobbyKing., One of the order options includes for us to set up your FPV gear that you add to your order. To build a good FPV gear package, please consider the following components:, ImmersionRC 5.8 600mw Video TX,
Details This is a fully built QAV400 FPV Quadcopter frame. ...GetFPV
TEAM BLACKSHEEP 5G8 PATCH (5DBI)
,
Details Designed by the godfather of circular polarization (IBCrazy, Video ...GetFPV
READY TO FLY QAV400 (RTF)
NOTE: This build does not include Lipos and charger. We recommend either 2200mah or 3300mah 4s Nano-Tech Lipos available at HobbyKing., One of the order options includes for us to set up your FPV gear that you add to your order. To build a good FPV gear package, please consider the following components:, ImmersionRC 5.8 600mw Video TX,
Details This is a fully built QAV400 FPV Quadcopter frame. ...GetFPV
READY TO FLY QAV500 (RTF)
NOTE: This build does not include Lipos and charger. We recommend 3300mah 4s Nano-Tech Lipos available at HobbyKing., One of the order options includes for us to set up your FPV gear that you add to your order. To build a good FPV gear package, please consider the following components:, ImmersionRC 5.8 600mw Video TX,
Details This is a fully built QAV500 FPV Quadcopter frame. ...GetFPV
READY TO FLY QAV400 (RTF)
NOTE: This build does not include Lipos and charger. We recommend either 2200mah or 3300mah 4s Nano-Tech Lipos available at HobbyKing., One of the order options includes for us to set up your FPV gear that you add to your order. To build a good FPV gear package, please consider the following components:, ImmersionRC 5.8 600mw Video TX,
Details This is a fully built QAV400 FPV Quadcopter frame. ...GetFPV
TEAM BLACKSHEEP DOMINATOR RX (5G8)
Note: compatibility with Airwave is provided, but the quality will not be desireable. We suggest the use of BOSCAM video transmitters. For instructions and supported frequencies please see: http://team-blacksheep.com/products/product:110,
Details This 5.8 receiver module is made specially for the ...