HobbyKing
TURNIGY NANO-TECH 5000MAH 6S 25~50C LIPO PACK
| Capacity | 5000mAh |
| Dimensions | 163x49x48mm |
| Balance Plug | JST-XH |
| Discharge Plug | HXT4mm |
Voltage:, 6S1P / 6 Cell / 22.2V, Discharge:, 25C Constant / 50C Burst, Weight:, 769g (including wire, plug & case), Suited to the following models: 6S: MIKADO LOGO500, ALIGN T-REX550/600, GAUI X5, Outrage 550, Hirobo SDX6S x 2: MIKADO LOGO600SE, HENSELEIT TDR, RJX X-TREME90EP, Rave 90 ENV FBL, Avant eAurora90, JR Airskipper E12, Kasama Srimok 90E, HIROBO Shuttle Plus+2, HIROBO Eagle3 EP, JR Vibe 90SG E12, Joker 3,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
GWS PG-03 PIEZO GYRO/FUTABA
| Input Voltage | 4.8V~6.0 V |
| Current Consumption | 10mA |
| Operation Temp | -5~60C |
Specification:, Dimension:, 26.0x27.0x11.3 mm (1.02x1.06x0.45 in ), Weight:, 7.0 g (0.285oz) with Plastic Case, Gain Adjustment:, Single rate, non-remote, Applicable R/C System:, Futaba, JR,Hi-tec, Sanwa / Airtronics,Multiplex, GWS,
5 Reviews
HobbyKing
TURNIGY NANO-TECH 2200MAH 6S 25~50C LIPO PACK
| Capacity | 2200mAh |
| Dimensions | 119x35x46mm |
| Balance Plug | JST-XH |
| Discharge Plug | XT60 |
Voltage:, 6S1P / 6 Cell / 22.2V, Discharge:, 25C Constant / 50C Burst, Weight:, 353g (including wire, plug & case), Suited to the following models:, MIKADO LOGO400, ALIGN T-REX500, GUAI EP425/550/X5, Compass Atom 500, MSH Protos500, JR Vibe 500E,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
S24011 HEAVY DUTY HIGH SPEED SERVO 24.7G / 2.4KG / .08SEC
| Torque | 2.40kg |
| Speed | 0.08sec / 60deg |
| Weight | 24.7g (33.3oz) |
| Voltage | 4.8-6v |
| Plug | JR type |
Features:, High speed of 0.08s/60deg @ 4.8V,
S24011 24.7g / 2.4kg / .08sec Standard Heavy Duty High ...2 Reviews
HobbyKing
TURNIGY NANO-TECH 2650MAH 6S 35~70C LIPO PACK
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!Spec.Capacity: 2650mAhVoltage: 6S1P / 6 Cell / 22.2VDischarge: 35C Constant / 70C BurstWeight: 417g (including wire, plug & case)Dimensions: 146x44x33mmBalance Plug: JST-XHDischarge Plug: 4mm bullet-connector Suited to the following models: MIKADO LOGO400, ALIGN T-REX500, GUAI EP425/550/X5, Compass Atom 500, MSH Protos500, JR Vibe 500E* The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.Advantages over traditional Lipo batteries.Power density reaches 7.5 kw/kg.Less Voltage sag during high rate discharge, giving more power under load.Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.Greater thermal control, pack usually doesnt exceed 60degCThickness swelling during heavy load doesnt exceed 5%, com,
5 Reviews
HobbyKing
TURNIGY NANO-TECH 3000MAH 6S 25~50C LIPO PACK
| 6S x 2 | Compass Atom 6HV |
: 3000mAh, : 6S1P / 6 Cell / 22.2V, : 25C Constant / 50C Burst, : 447g (including wire, plug & case), : 153x46x35mm, : JST-XH, Discharge Plug:, 4mm bullet-connector, Suited to the following models:, 6S: MIKADO LOGO400, ALIGN T-REX500, GUAI EP425/550/X5, Compass Atom 500, MSH Protos500, JR Vibe 500E,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
TOWERPRO MG996R 10KG SERVO 55G / 10KG / .20SEC
: JR (Fits JR and Futaba),
This is essentially an upgraded version of the famous towerpro ...5 Reviews
HobbyKing
VIGOR SERVO .12SEC / 1.8KG / 9G
| Operating Voltage | 4.8-6.0V |
| PWM Input Range | Pulse Cycle 20±2ms, Positive Pulse 1~2ms |
| STD Direction | Counter Clockwise / Pulse Traveling 1500 to 1900µsec |
| Torque | ¡Ù1.6 kgf.cm (22.22 oz/in) at 4.8V, ¡Ù1.8 kgf.cm (25 oz/in) at 6V |
| Operating Speed | 0.14 sec/ 60° at no load at 4.8V, 0.12 sec/ 60° at no load at 6V |
| Weight | 9g (0.32 oz) |
| Size | 23 x 11.8 x 25.6 mm |
| Plug Available | FUT, JR |
| Special Feature | Carbon Fiber Gears, Ball Bearing |
5 Reviews
HobbyKing
CAR CIGARETTE LIGHTER ADAPTER FOR BATTERY CHARGERS
| Outside diameter | 5.49mm |
| Inside diameter | 2.52mm |
| Outside diameter | 5.49mm |
| Inside diameter | 2.12mm |
| Max current | 12A, 25V |
NOTE:, Please ignore the labels that say 'Futaba' and 'JR'. For some reason the factory believed you can charge your transmitter with a 12V car power supply.,
Car cigarette lighter adapter for 12v chargers. Adapter includes two ...5 Reviews
HobbyKing
HOBBYKING X-1000 ADVANCED HEAD-MOVEMENT-TRACKER GYRO
| Power | 8V to 12V DC power supply. Some |
| Size | 25mmX35mm |
| Weight | 20g |
| Range for measuring | +-90 degree/second rotational speed movement. |
| Channels | X axis- channel 7 Y axis-channel 8 |
| Graupner | (MC20, MC24, MX22) |
| JR and other transmitters without programmable channel | (9303, 9X) |
Specifications:, Default Setting:, FUTABA:, (FF-7, FF-8, FF-9, T9Z, T12MZ, T14MZ), Multiplex transmitter:, (Royal Evo, Cockpit SX, mc4000),
X-GYRO 1000 is a two axis head tracking system, based ...5 Reviews
HobbyKing
TURNIGY MG90S METAL GEAR SERVO 1.8KG / 13.4G / 0.10SEC
| Weight | 13.4g |
| Dimension | 22.8*12.2*28.5mm |
| Operating voltage | 4.8-6.0V |
| Temperature range | 0- 55deg |
Stall torque:, 1.8kg/cm (4.8V) - 2.2kg/cm (6.0V), Operating speed:, 0.10sec/60degree(4.8v) - 0.08sec/60degree(6.0V), Servo Plug:, JR (Fits JR and Futaba),
5 Reviews
HobbyKing
GWS PG-02 PIEZO GYRO/FUTABA
| Dimension | 28.5 x 26.5 x 11mm |
| Power supply | 4.8~6V |
| Current drain | 30mA (At 4.8V) |
| Operating temperature | -5~+50C |
Specification:, Weight:, 11g(Gyro only) 13g (with gyro mount), Gain adjustment:, Dual-Gain (Remote control), Applicable R/C systems:, Futaba, JR, Hi-Tec, Sanwa/Airtronics Multiplex, GWS,
5 Reviews
HobbyKing
TOWERPRO MG946R 12KG 55G / 12KG / .20SEC
: JR (Fits JR and Futaba),
Higher torque version of the MG995. Good for slow trainers, ...5 Reviews
HobbyKing
HXT 9866 DIGITAL METAL GEAR 45G / 7.2KG / .09SEC
| Weight | 45g |
| Dimensions | 40.5 x 20 x 37mm |
| Torque | 7.2kg-cm |
| Speed | .09sec/60deg @ no load |
| Running Current | 700mA |
| Stall current | 1200mA |
| Horn Gear Spline | 25segments (same as Futaba) |
| Connector Wire | 300mm |
| Connector Housing | Universal (JR/Futaba) |
| Bearing | Yes |
| Gear Type | Alloy / Steel |
5 Reviews
HobbyKing
HXT 9844 DIGITAL METAL GEAR 45G / 8.6KG / .17SEC
| Weight | 45g |
| Dimensions | 40.5 x 20 x 37mm |
| Torque | 8.6kg-cm |
| Speed | .17sec/60deg @ no load |
| Running Current | 610mA |
| Stall current | 1200mA |
| Horn Gear Spline | 25segments (same as Futaba) |
| Connector Wire | 300mm |
| Connector Housing | Universal (JR/Futaba) |
| Bearing | Yes |
| Gear Type | Alloy / Steel |
5 Reviews