RCPlanet
ASSOCIATED SC18 BODY SPEED TECH ASC21366
, Length:, 10.5" (268mm), Width:, 4.8" (121mm) behind front wheels, narrowest point, Width:, 5.8 (147mm) at rear wheels, widest point, Height:, 3.1" (80mm), ,
Team Associated brings short-course scale graphics to the SC18. All ...HiModel
E-TECH HEAD LOCK AVCS DIGITAL SERVO COMPATIBLE GYRO G105
• Operating voltage | DC 4.0V to 6.0V |
• Input signal | 1.0-2.0ms |
• Dimension | 27 x 28.5 x 18 mm |
• Weight | 15g |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: Compatible with analog and digital servos. Recommend use with ...HiModel
E-TECH 6.5G LIGHT WEIGHT HEAD LOCK AVCS GYRO G104
• Operating voltage | DC 4.5 ~ 6.0V |
• Input signal | 1.0-2.0ms |
• Dimension | 30x 18 x 8.3 mm |
• Weight | 6.5g |
, , , , , , Specifications:, , , , , , , , , , , Support digital servos., , ,
Includes/Requires: Includes:1 x Gyro. 1 x English/Chinese manual.HiModel
ART-TECH CESSNA182 3 CHANNEL ELECTRIC POWERED AIRPLANES RTF
Wing span | 980mm |
Length | 860mm |
Motor | 480, directly drive |
Airfoil | RAF 4838 |
Battery | 8.4v, 1000mah |
Radio | FM proportional, 3ch for beginner; |
Frequency Available | 35Mhz, 40Mhz. |
, , , , , , Specifications:, , , , , , , , , , , Weight 560gram, Scale appearance, great attention has been given to details, Very stable flight, easy to control, , ,
Features: The Cessna 182, one of the world most famous ...HiModel
MAIN WING SET FOR 3CH. ART-TECH CESSNA182 ELECTRIC POWERED AIRPLANES RTF
Includes/Requires:, , Includes:, with inner box packing for protacting,
HiModel
FRSKY 2.4G 5-CHANNEL TWO-WAY RECEIVER (NANO JST CONNECTOR) VD5M
Dimension | 21*16*5.8mm |
Weight | 2.0g |
Operating Voltage Range | 3.0V-7.2V |
Operating Current | 20mA |
Operating Range | >300M |
, , , , , , Specifications:, , , , , , , , , , , 2.4GHz Two Way Series, Number of Channels: 5, Bind procedure:, 1) Ascertain that the transmitter is in the PPM mode. Turn the transmitter off., 2) Turn on the transmitter while holding the F/S button on the transmitter module. Release the button. The RED LED on the transmitter module will flash, indicating the transmitter is ready to bind to the receiver., 3) Connect the provided binding cable to corresponding channels of VD5M (see 1.1 Compatibility chart for details), and connect battery to the receiver. LED on the receiver will flash, indicating the binding process is completed. Turn off both the transmitter and receiver, and disconnect the binding cable from VD5M., 4) Turn on the transmitter and connect the battery to the receiver. The RED LED on the receiver will indicate the receiver is receiving commands from the transmitter., The receiver/transmitter module binding will not have to be repeated, unless one of the two is replaced., Note: Make sure corresponding channels are connected by provided binding cable when working with the transmitter module., , ,
Features: Features 1) Lighter weight and physically smaller than D8R-II ...3 Reviews
HiModel
FRSKY 2.4G 6-CHANNEL RECEIVER (NANO JST CONNECTOR) TFR6M
Dimension | 31*23*7mm |
Weight | 3.4g / 2.7g (naked) |
Range | 3.5V~10V |
Operating Temperature Range | -10℃~60℃ |
Ground Range | >300m |
FASST 2.4G Air Systems (7CH Mode/Multi Mode) | 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, etc. |
, , , , , , Specifications:, , , , , , , , , , , Number of Channels: 6, Operating Voltage, Compatibility:, , ,
Features: Features: 1) Lighter weight and physically smaller, designed for ...ngHobbies
90 DEGREE FOV NANO CMOS CAMERA (NTSC)
Sensor type | CMOS 4.75mm x 3.55mm |
Resolution | 656x492 (NTSC) |
Signal processing | DSP |
Lines | 520TVL |
Sensitiivity | 0.008Lux/F1.2 |
Lens included | 90 degrees |
S/N Ratio | 48db |
Video out signal | Standard 1VPP/75ohm |
Dimensions | 9.5mm x 9.5mm x 20mm |
Weight | 4gr |
Power | 3.3V-6V |
White | Video Out |
Red | 3.3-6V in |
Black | Ground |
Specifications:, Scanning type: 2:1 Interlaced, Connection diagram:, Manual:, none,
This is the smallest FPV camera on the market today. ...ngHobbies
90 DEGREE FOV NANO CMOS CAMERA (PAL)
Sensor type | CMOS 4.75mm x 3.55mm |
Resolution | 786x576 (PAL) |
Signal processing | DSP |
Lines | 520TVL |
Sensitiivity | 0.008Lux/F1.2 |
Lens included | 90 degrees |
S/N Ratio | 48db |
Video out signal | Standard 1VPP/75ohm |
Dimensions | 9.5mm x 9.5mm x 20mm |
Weight | 4gr |
Power | 3.3V-6V |
White | Video Out |
Red | 3.3-6V in |
Black | Ground |
Specifications:, Scanning type: 2:1 Interlaced, Connection diagram:, Manual:, none,
This is the smallest FPV camera on the market today. ...Flying-Hobby
ROTOR TECH CARBON FLYBAR PADDLE (4MM) FOR 46-91 HELI
Flybar Dia. | 4mm |
Weight | less than 20g |
Flying-Hobby
ROTOR TECH 105MM LUMINOUS CARBON FIBER NIGHT TAIL BLADES
Length | 105mm |
Width | 30mm |
Root | 5mm |
Weight | 6.9g |
Bolt hole | 3mm |
Features:, , Specifications:, , Includes:,
Product description Carbon fiber tail blades. Uses LED type lights. ...Flying-Hobby
ROTOR TECH 620MM CARBON FIBER SYMMETRICAL MAIN BLADES
Length | 620mm |
Width | 59mm |
Weight | 135-140g |
Grip | >12mm |
Hole | 4-5mm |
Airfoil | Symmetrical |
Tip | Aeroflat |
Make | Carbon Fiber |
Common Application | 50 size RC Helicopters |
Specifications:, , Includes:, , RotorTech™ Standard Features:,
1x 3D/holographic decal sheet 4x 1mm thick washers 4x 2mm ...Flying-Hobby
ROTOR TECH 76MM CARBON FIBER TAIL BLADES
Length | 76mm |
Width | 23mm |
Grip | >=5mm |
Hole | 3mm |
Airfoil | Symmetrical |
Tip | Round |
Flying-Hobby
ROTOR TECH 85MM CARBON FIBER TAIL BLADES
Length | 85mm |
Width | 26mm |
Grip | >=5mm |
Hole | 3mm |
Common Application | .30 size RC Helicopters |
Features:, Unmatched carbon fiber craftsmanship and quality. Perfect spanwise and cordwise balance., Specification:, ,
Product description Recommended Blades and Battery's size for Heli SetupsFlying-Hobby
ROTOR TECH 115MM CARBON FIBER TAIL BLADES
Length | 115mm |
Width | 30mm |
Grip | >=5mm |
Hole | 3mm |
Common Application | 90 size and gas-powered RC helicopters |
Specification:,