ReadyMadeRC
RIGHT ANGLE 2.5MM 4 CONDUCTOR PLUG
| For the 6 foot connectors with bare/green/blue/white connectors | Bare = ground |
| For the 12 inch connectors (no longer stocked) | Black = Ground |
ReadyMadeRC
JUMPER CABLE (VIDEO) FOR CAMERA AND TRANSMITTER CABLES
,
This is a female to female JR style servo jumper ...ReadyMadeRC
FUTABA STYLE SERVO Y-CABLE (ALSO AUDIO SPLITTER FOR RMRC CABLES)
,
This is a Futaba style servo y-cable. Can be used ...ReadyMadeRC
CAMERA CABLE (3-WIRE SUPER COMPACT)
The wiring order on the camera connector as delivered will fit the following cameras directly:, RMRC-520, RMRC-420XV, RMRC-MINI, RMRC-PICO, DPC-171/KX-171,, It will fit the following cameras by simply rearranging the wiring order (User responsible for verifying compatibility):, SN777 , KX-131, KX-191, Others?, PLEASE NOTE: This cable feed the voltage directly, so if you're powering your system with a 12V battery and you have a 5V camera , you need to either use a regulator before the cable or power the camera with a separate power source.,
This is a super small 3-wire camera lead compatible with ...ReadyMadeRC
433MHZ NAGOYA DUAL BAND SWIVEL ANTENNA W/SMA CONNECTOR
| Frequency | 144/430MHz |
| Gain | 2.15db / 3.0db |
| Max power | 10Watts |
| V.S.W.R | Less than 1.5 |
| Impedance | 50 OHM |
| Connector | SMA |
| Length | Retracted 135mm / Extended 370mm Weight |
Specifications:,
An excellent choice for high quality SMA mounted 433MHz antennas. ...ReadyMadeRC
FATSHARK BATTERY FOR GOGGLES (7.4 WH)
Includes:,
Shaped to stay put in the elastic strap, with higher ...ReadyMadeRC
FAT SHARK PREDATOR V2 250 VIDEO GLASSES W/TRANSMITTER AND CAMERA
| FOV (field of view) | 25 degrees diagonal |
| Interpupillary (IPD) distance | 63.5mm (fixed) |
| Optional diopter lens inserts | -2, -4, -6 dpt Image size |
| Power supply | 7 - 13 V (2S/3S supply) |
| Weight | 150g |
| Note | Fat Shark headsets use Airwave brand RF modules. |
Includes:, , Goggles Optics:, , Audio:, Stereo (optional headphones available, User Controls:, , Electrical:, , Power consumption (@7.4V nominal):, 300mA wireless mode, Antenna:, , Mechanical:, , Interface:, , Operating Frequencies:, , *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
FatShark quality on a budget! Backed by the quick shipping ...ReadyMadeRC
HITEC - HS-7985MG
| Motor Type | Coreless |
| Bearing Type | Dual Ball Bearing |
| (4.8V/6.0V) | 0.16 / 0.13 |
| . (4.8V/6.0V) | 144 / 172 |
| (4.8V/6.0V) | 10.4 / 12.4 |
| Size in Inches | 1.57 x 0.78 x 1.45 |
| Weight ounces | 2.18 |
| Weight grams | 61.80 |
Product Description:, The new HS-7985MG High Torque Digital Servo has the added benefit of our new G2 second generation programmable digital circuit. This circuit has twice the resolution of our original circuit while adding programmable overload protection. The technology doesn’t stop at the circuit board, with a high performance coreless motor, dual ball bearing supported output shaft, bushing supported gear shafts and our Heavy Duty Metal gear train the HS-7985MG was designed to withstand the stress of larger high performance aircraft and on/off road vehicles., Features:, , Programmable Features:, , Specifications:, Size in Millimeters:, 39.88 x 19.81 x 36.83,
G2 Digital Circuit Coreless Motor Dual Ball Bearing Supported Output ...ReadyMadeRC
HS-81
Motor Type:, 3 Pole, Bearing Type:, None, Speed (4.8V/6.0V):, 0.11 / 0.09 sec @ 60 deg., Torque oz./in. (4.8V/6.0V):, 36 / 42, Torque kg./cm. (4.8V/6.0V):, 2.6 / 3.0, Size in Inches:, 1.17 x 0.47 x 1.16, Size in Millimeters:, 29.72 x 11.94 x 29.46, Weight ounces:, 0.58, Weight grams:, 16.44,
A popular servo for smaller airplanes, heli’s, boats, cars and ...ReadyMadeRC
HS-785HB SAIL WINCH SERVO
Motor Type:, 3 Pole, Bearing Type:, Dual Ball Bearing, Speed (4.8V/6.0V):, 1.68 / 1.38, Torque oz./in. (4.8V/6.0V):, 153 / 183, Torque kg./cm. (4.8V/6.0V):, 11.0 / 13.2, Size in Inches:, 2.32 x 1.14 x 1.96, Size in Millimeters:, 58.93 x 28.96 x 49.78, Weight ounces:, 3.88, Weight grams:, 110,
The HS-785HB sail winch servo with its large drum wheel ...ReadyMadeRC
HS-485HB
Motor Type:, 3 Pole, Bearing Type:, Top BB, Speed:, 0.20 , 0.17 sec @ 60 deg., Torque:, 72 / 89 (4.8v / 6.0v), : Heli's and Aircraft up to 72” or up to 12lbs when using just one servo per control surface., : Be aware that high vibration gas (not glow) engines combined with large contol surfaces and large thows (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs., Warning:, Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.,
HS-485HB updates the very popular HS-475HB by adding more torque ...ReadyMadeRC
900MHZ 1/2 WAVE 2DBI ANTENNA W/SMA MALE CONNECTOR
,
High quality 916MHz 1/2 Wave Dipole Antenna with an SMA ...ReadyMadeRC
LOW PASS FILTER FOR 1.3GHZ ANTENNAS
| Features | Low insertion loss |
ReadyMadeRC
30DB ATTENUATOR WITH SMA CONNECTORS
| Frequency | 0-18GHz |
| VSWR | 1.35 |
| Power (Avg) | 2W @ 25C |
| Power (Peak) | 500W |
| Impedance | 50 Ohms |
| Attenuation Accuracy | +/- 0.75 dB |
Specifications:,
A great tool for testing the performance of equipment. Place ...ReadyMadeRC
VAS - 5.8 GHZ SKEW PLANAR WHEEL WHIP ANT (RHCP) SINGLE, STRAIGHT
| http | //www.rcgroups.com/forums/showpost.php?p=18484051&postcount=786 |
ATTENTION: It has come to my attention that there is a minor, fixable incompatibility with some Airwave based receivers. The standard 5.8GHz receivers may require a minor modification to fix a problem where the receiver tries to put a small DC bias voltage on the antenna. Please see this forum thread post for the (relatively easy) fix:, Radiation pattern:,
This amazing creation is built by Alex Greve (IBCrazy). The ...