SDSHobby
IMPORTED FIBER TAPE 3CM*20M WITH TEMPERATURE RESISTANCE 150℃
Specifications:, Width:, 3CM, Length:, 0 Meters, Features:,
Made of reinforced fiber material, coming with strong tension and ...SDSHobby
IMAX QUATTRO B6 COMPACT BALANCE CHARGER WITH BUILT-IN AC POWER（EURO TYPE）
| Specifications | AC Input |
| DC Input | 11-18V |
| Max.charge Power | 50W |
| Charge Current Range | 0.1-5.0A |
| Discharge Current Range | 0.1-1.0A |
| Current Drain for Balancing Li-po | 300mA/cell |
| NiCd/NiMH Battery Cell Count | 1-15cells |
| Li-ion/Polymer Cell Count | 1-6cells |
| Pb Battery Voltage | 2-20V |
| Net Weight | 575g |
| Dimension | 135x144x36mm |
Circuit Power:, Max.discharge Power: 5W,
SDSHobby
IMAX B6 DUO BALANACE CHARGER (400W )WITH THIN FILM BUTTON-RED
| Operating Voltage Range | DC11.0-18.0V |
| Max.Charge Power | 2*200W |
| Max.Discharge Power | 2*25W |
| Charge Current Range | 0.1-10.0A |
| Discharge Current Range | 0.1-5.0A |
| Current Drain for Balancing Li-Po/lon/Fe | 200mA/cell |
| Li-ion/Fe/Polymer Cell Count | 1-6cells |
| Nicd/Nimh Battery Cell Count | 1-18cells |
| Pb Battery Voltage | 2V-24V |
| Dimension | 200*135*57mm |
Specification:, Circuit Power:,
SDSHobby
IMAX B6 ULTIMATE 200W TOUCH SCREEN COMPACT BALANCE CHARGER
| Operating voltage range | DC 11. 0-18.0 Volt |
| Circuit power | Max. Charge power 200Watts |
| Charge current range | 0.1-10.0A |
| Discharge current range | 0.1-5.0A |
| Current drain for balancing Li-Po/Ion/Fe | 300mA/cell |
| Li-ion/Fe/Polymer cell count | 1-6cells |
| NiCd/NiMH battery cell count | 1-18cells |
| Pb battery voltage | 2-20V |
| Net weight | 607g |
| Dimension | 150x116.3x53mm |
Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically., Processing time limit:, You can also limit the maximum process time to avoid any possible defect,
Specifications Max. Discharge power 25Watts Introduction IMAX ultimate employs the ...SDSHobby
IMAX B6 DIGITAL MULTIFUNCTIONAL BALANCE CHARGER （PAPER BOX)
| Voltage level | 1.2V/cell |
| Allowable fast charge current | 1C-2C (Depends on the performance of |
| Discharge voltage cut off level | 0.85V/cell (NiCd), 1.0V/cell(NiMH) |
| Voltage level | 3.6V/cell |
| Max.charge voltage | 4.1V/cell |
| Allowable fast charge current | 1C or less |
| Min. discharge voltage cut off level | 2.5V/cell or higher |
| Voltage level | 3.7V/cell |
| Max.charge voltage | 4.2V/cell |
| Allowable fast charge current | 1C or less |
| Discharge voltage cut off level | 3.0V/cell or higher |
| Voltage level | 3.3V/cell |
| Max.charge voltage | 3.6V/cell |
| Allowable fast charge current | 4C or less |
| Discharge voltage cut off level | 2.0V/cell or higher |
| Voltage level | 2.0V/cell |
| (Lead-acid) Max.charge voltage | 2.46V/cell |
| Allowable fast charge current | 0.4C or less |
| Discharge voltage cut off level | 1.75V/cell or higher |
Operating voltage range:, DC11.0-18.0 Vult AC100-240V,50/60Hz, Circuit Power:, MAX.charger power 50W ;Max. discharger power 5W, Charge current range:, 0.1-5.0A, Dicharge current range:, 0.1-1.0A, Current drain for balacing Li-poer:, 300mAh/cell, NiCd/NiMh:, 1-15 cell, Li-ion/Pulymer:, 1-6 series, Pb battery voltage:, V or 20V, Weight:, 580 g, Dimension:, 133mm x 87mm x 33mm,
iMax B6 1 to 6cells LiPo Balance / NiMH / ...SDSHobby
IMAX B6PRO MULTIFUNCTIONAL BALANCE CHARGER
| -Lilon/Lipo/LiFe | 1-6cells |
| -Nicd/NiMH | 1-15 cells |
| -Lead acid(Pb) | 2-20V |
| -Charge Rate | 0.1A-5A |
| -Discharge | 0.1A-1A |
SDSHobby
JST PLUG + T PLUG A+B WITH18AWG SILICONE CABLE L60MM
Specifications for Silicone Cable:, Cable Length:, 60mm, Cable Type:, 18AWG, Cores of Copper Wire:, 150 Cores,
SDSHobby
KDS-N300 3.0KG/21G DIGITAL SERVO/ SWASHPLATE SERVO WITH PLASTIC GEARS FOR KDS450SD, KDS450BD HELICOPTER
| Output Torque | 2.4kg.cm at 4.8V, 3.0 kg.cm at 6.0V; |
| Speed | 0.07sec/ 60 |
| Dimension | 23x12x27.5mm |
| Working Voltage | DC 4.5 |
| Working Frequency | 1520us/333Hz |
| Bearing | double bearings |
| Motor | 12MM Coreless motor |
| Weight | 21g |
| Application | could be used as swashplate servo for KDS450SD, KDS450BD Helicopter or other 450 series helicopter |
Specifications:,
° at 4.8V, 0.06sec/60 ° at 6.0V; 〜 6.0 VSDSHobby
KDS ADAPTOR POWER 12.6V (OUTPUT) WITH EURO STANDARD PLUG
Specifications:, Input Voltage:, AC100-240V, 50/60HZ, Output Voltage:, DC 12.6V, Output Current:, DC 1.5-2A,
SDSHobby
KRY FILE/KEY FILE 10PCS/SET WITH LENGTH 140MM
Specifications:, Material:, high tensile tool steel and rubber handle, Length:, 140mm,
10 kinds of small and exquisite design can meet different ...SDSHobby
KV3300 FSD BRUSHLESS INRUNNER MOTOR FOR 450PRO RC HELICOPTER
| KV (rpm/v) | 3300 |
| Shaft Diameter (mm) | 3.15 |
| Total Weight (g) | 100 |
| Max. Power (w) | 550 |
| Running-Light Current (A) | 1.5 |
| Resistance (KΩ) | 0.033 |
| Application Fields | model helicopters |
| Cells Ni-Cd/Ni-MH | 9S-14S |
| Cells Li-Po | 3S-5S |
| ESC | ≤35A |
Specifications:, Motor Diameter (mm): 28, Motor Length (mm): 34, Shaft Length (mm): 17, The number of Poles: 6, Running Current (A):25, Max. Current (A): 35,
Recommend Equipments (need to buy separately)SDSHobby
KV3835-FSD 450A RC MODEL HELICOPTER OUTRUNNER BRUSHLESS MOTOR
| Running-Light Current(A) | 1.9 |
| Ni-Mh or Ni-Cd Battery(cell) | 9-12s |
| Lipo Battery(cell) | 3-4s |
| Running Current (A) | < 28 |
| Shaft Diameter(mm) | 3.175 |
| Resistance | 0.0240 |
Specification:, : 3835, Max Permissible Current (A): 38, Weight(g): 55, The Number of Poles: 6, :93%, :550W,
KV(RPM/V) Efficiency Max power