ReadyMadeRC
5.8 GHZ SKEW PLANAR WHEEL WHIP ANTENNA (RHCP) (RIGHT ANGLE)
| http | //www.rcgroups.com/forums/showpost.php?p=18484051&postcount=786 |
ATTENTION: It has come to my attention that there is a minor, fixable incompatibility with some Airwave based receivers. The standard 5.8GHz receivers may require a minor modification to fix a problem where the receiver tries to put a small DC bias voltage on the antenna. Please see this forum thread post for the (relatively easy) fix:, , Radiation pattern:,
This amazing creation is built by Alex Greve (IBCrazy). The ...ReadyMadeRC
RP SMA MALE TO SMA MALE ADAPTER
Note: different web pages list the "gender" of SMA and RP-SMA connectors differently. Please look closely at the pictures to determine if this fits the application.,
RP-SMA Male to SMA Male Adapter.ReadyMadeRC
TRANSMITTER CABLE (LARGE PLUG)
Total cable length of 12", terminated in two male servo connectors: one with video, power, and ground for video, and one with audio, power, and ground for audio. Note that this cable will supply the battery voltage directly to the components, so if your cameras require 5v you will need to insert a regulator in the line before it gets to the camera.,
This is a 4-wire camera lead compatible with many different ...ReadyMadeRC
15" (38CM) A/V CABLE WITH RIGHT ANGLE CONNECTORS
,
The perfect solution for those short runs in your ground ...ReadyMadeRC
IRC STYLE MALE TO READYMADERC MALE AUDIO/VIDEO CONNECTOR
,
Great for adapting the standard ReadyMadeRC camera connectors to plug ...ReadyMadeRC
PENGUIN V2 TRANSPARANCY
This heavy duty transparency allows the user to install an HD camera outside the plane for best view. With this transparency, it is possible to have a totally clear view off of the front of the plane with the HD camera mounted on top. This also allows the user to use a GoPro Hero camera inside the waterproof case, while having a protected camera and transmitter inside the canopy. Allows flying through clouds without getting cameras wet. :),
Includes a mounting location on the top of the canopy ...ReadyMadeRC
1500MW 1300MHZ TRANSMITTER BLACK EDITION READYMADERC INTL
| Weight of transmitter with heat sink case, not including wires or antenna | 87g |
| Weight with bare module without heat sink, not including wires or antennas | 37g |
| bare module dimensions | 70*37*7mm |
| CH4 | 1080MHZ |
| CH5 | 1120MHZ |
| CH6 | 1160MHZ |
| CH7 | 1200MHZ |
| CH8 | 1240MHZ |
| CH9 | 1280MHZ |
| CHH | 1320MHZ |
| CHC | 1360MHZ |
| CHd | 1258MHZ |
Frequencies:, *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
WE'VE OPENED UP A WHOLE NEW FREQUENCY FOR LEGAL USE ...ReadyMadeRC
1000MW 1300MHZ TRANSMITTER - NEW CUSTOM READYMADERC US VERSION
| Output Power | 1000mW (see above) |
| Nominal output impedance | 50 ohms |
| Operating voltage | 10.5-13V DC (will function at lower power at lower voltages listed above) |
| Supply current | 500mA (maximum) |
| Sub carrier frequency | 6.5MHz |
| Dimension | 45 x 28 x 9mm |
| Weight (transmitter only) | 22g |
| Includes | Transmitter |
*Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
WE'VE OPENED UP A WHOLE NEW FREQUENCY FOR LEGAL USE ...ReadyMadeRC
800MW* 1300MHZ TRANSMITTER - NEW CUSTOM READYMADERC US VERSION
| Weight with case and antenna | 3.4oz. |
High quality 800mW* 1300MHz transmitter. Not the cheap copies available on eBay and from other overseas sources. Although the manufacturer calls this an 800mW transmitter, and other retailers sell it stating it's that power level, they actually put out 600mW of power (including the ones from the other vendors). We take the time to verify the ratings from the manufacturers. Do the other dealers? :), *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
WE'VE OPENED UP A WHOLE NEW FREQUENCY FOR LEGAL USE ...ReadyMadeRC
400MW 1300MHZ TRANSMITTER - NEW CUSTOM READYMADERC US VERSION
| Weight with case and antenna | 3.2oz. |
| Weight with bare module and antenna | 1.7 oz. |
Channel Selection:, 9: 1280MHz, d: 1258MHz, *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
WE'VE OPENED UP A WHOLE NEW FREQUENCY FOR LEGAL USE ...ReadyMadeRC
200MW 1300MHZ TRANSMITTER - NEW CUSTOM READYMADERC US VERSION
| Weight with bare module and antenna | TBD |
Channel selection:, DIP switch 4, "off" for 1280MHz, "on" for 1258MHz., *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
WE'VE OPENED UP A WHOLE NEW FREQUENCY FOR LEGAL USE ...ReadyMadeRC
1000MW 900MHZ TRANSMITTER - US VERSION
| Output Power | 1000mW |
| Nominal output impedance | 50 ohms |
| Operating voltage | 10.5-13V DC (will function at lower power at lower voltages listed above) |
| Supply current | 500mA (maximum) |
| Sub carrier frequency | 6.5MHz |
| Dimension | 50 x 25 x 7mm |
| Weight (transmitter only) | 10g |
| Includes | Transmitter |
*Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
A high quality, low weight, high powered transmitter in the ...ReadyMadeRC
RMRC - 900MHZ 1000MW TRANSMITTER - INTL VERSION
| Output Power | 1000mW |
| Nominal output impedance | 50 ohms |
| Operating voltage | 10.5-13V DC (will function at lower power at lower voltages listed above) |
| Supply current | 500mA (maximum) |
| Sub carrier frequency | 6.5MHz |
| Dimension | 50 x 25 x 7mm |
| Weight (transmitter only) | 10g |
Includes:, , Frequencies:, , *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
THIS IS THE INTERNATIONAL VERSION, ANYONE IN THE US SHOULD ...