SDSHobby
FSD 2826-14 KV1250 OUTRUNNER BRUSHLESS MOTOR FOR AIRCRAFT RC PLANE RC MODEL
| Running-Light Current(A) | 0.6 |
| Ni-Mh or Ni-Cd Battery(cell) | 6-9s |
| Lipo Battery(cell) | 2-3s |
| Running Current (A) | < 9 |
| Shaft Diameter(mm) | 3.175 |
| Max pull (kg) | 0.65 |
| Propeller(IN) | < 10 |
| Resistance | 0.1380 |
Specification:, : 1250, Max Permissible Current (A): 13, Weight(g): 45, The Number of Poles: 14, :93%, :150W,
KV(RPM/V) × 7 Efficiency Max powerSDSHobby
A123 LI-FE BATTERY 4 CELLS 13.2V 2300MAH 30C FOR RC MODEL AIRPLANES WITH DEANS PLUG
| Voltage | 13.2V |
| Capacity | 2300mAh |
| Max Charging Current | 5C /11.5A |
| Max Continuous Discharging Current | 30C /69A |
| Max Burst Discharging Current | 60C /138A |
| Weight | 316g |
| Size | L68*W50*H50mm |
| Application | RC Airplanes |
| Connector Type | Deans Plug and Balance Chargeable Plug |
Specifications:, ,
SDSHobby
K-019 TURBO GLOW PLUG STORAGE BOX-RED COLOR
| Two colors are available | red and blue |
Feature:,
CNC machined 6061 with anodizing color There is a magnet ...SDSHobby
TX 2700MAH 7.4V 2S1P LI-PO BATTERY FOR TRANSMITTER
Specifications:, Capacity:, 700MAH, Voltage:, 7.4V, Max Working Current:, 13.5A (5C), Max Burst Current:, 1.5A (8C), Plug Type:, FUTABA male (with 15CM JST converting cable), Suitable Transmitter:, Futaba 12FG,T8FG; Walkera DEVO4, DEVO7E, Dimension:, 110*30*14mm, Net Weight:, 96g,
SDSHobby
ROVAN BAJA TURN-OFF SWITCH #63024
| Step 1 | Replay the previous turn-off cable with the 63024 cable after opening the engine case. |
| Step 3 | Put these cables in order according to your needs |
Installation Instruction:, Step 2: Mounting the control board in the battery case with double-side adhesive tape and connect the signal cable to the channel of receiver,
SDSHobby
SHOULDER-MOUNTED BRACKET/HOLDER FOR FPV DISPLAYER
Features:,
Designed with 2 slots, the holder makes the displayer can ...SDSHobby
12V BEC FOR FPV
Features:, Output Port:, 12V , 30W (JST male), Input Port:, 4S-8S (JST female), Net Weight:, 10g,
High transfer efficiency, low heat Equipped with 3M double-sided adhesive ...SDSHobby
PROLUX PX1323BK 12 IN 1 FLEXIBLE HEXAGON SCREW DRIVERS
Package Lists:, Hexagon Screw Drivers:, H1.5, H2.0, H2.5, H3.0 (Metric), Straight Screw Drivers:, 1.5, 2.5, Phillip Screw Drivers E:, PH00, PH0,
H0.50 ′′, H1/16 ′′, H5/64 ′′, H3/32 ′′ (Imperial) The ...SDSHobby
FVT PROGRAM CARD FOR SKY I SERIES BRUSHLESS ESC
Specifications:, Size:, 92* 52 * 6mm, Weight:, 6g, Input Voltage:, 4.8-6V (Extra battery pack will need only if there is no output BEC for ESC),
SDSHobby
HOBBYWING SKYWALKER QUATTRO 25AX4 4-IN-1 BRUSHLESS ELECTRIC SPEED CONTROLLER ESC FOR QUADCOPTERS
| Safety arming feature | Regardless the throttle stick position, the motor will not spin after battery connected |
| Throttle calibration function | Throttle range can be calibrated to be compatible with different transmitters |
| Multiple program methods supported | transmitter stick, LED Program Card. Very easy to program the ESC at home or at the flying field. |
| Full protection | Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection. |
Specification:, ESC in the Quattro:, 4 in 1, Output:, Continuous 25A, Burst 30A up to 10 seconds, Input Voltage:, -4S Lipo or 5-12 cells Ni-MH, BEC:, 3A / 5V Switch mode BEC, Refresh rate of the throttle signal:, 50Hz to 432Hz, Max Speed:, 10000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM (BLM = Brushless Motor), Size:, 70mm*62mm*11mm, Weight:, 112g, Features:, 1. Brake:, on/ off, . Battery Type:, Lipo/ Ni-MH, 3. Cut-off Mode:, soft-cut/ hard-cut, 4. Cut-off Threshold:, Low/ Medium/ High, 5. Start Mode:, normal/ soft/ super soft, 6. Timing:, Low/ Medium/ High,
Four (4) speed controllers in 1 board, only 1 pair ...SDSHobby
HIGH QUALITY 100 METER HEAT SHRINKABLE TUBING DIA. =5MM (RED, BLACK ,BLUE,YELLOW COLOR)
| Type | 5mm |
| Color | Red, Black ,Blue,Yellow |
| Length | 100 meter |
| Material | PVC |
| Working Temperature | -55 to 125 Celsius Degree |
| Temperature Resistance | 105 Celsius Degree |
| Shrink Ratio | ≥48±5%, 2 |
| Nominal Voltage | 300V |
Specifications:, Application:, The heat shrinkable tubing is mainly used for wire connection, solder joint protection, electronic device protection and insulation treatment, metal surface protection etc.,
SDSHobby
HIGH QUALITY 200 METER HEAT SHRINKABLE TUBING DIA. =4MM (RED, BLACK ,BLUE,YELLOW COLOR)
| Type | 4mm |
| Color | Red, Black ,Blue,Yellow |
| Length | 200 meter |
| Material | PVC |
| Working Temperature | -55 to 125 Celsius Degree |
| Temperature Resistance | 105 Celsius Degree |
| Shrink Ratio | ≥48±5%, 2 |
| Nominal Voltage | 300V |
Specifications:, Application:, The heat shrinkable tubing is mainly used for wire connection, solder joint protection, electronic device protection and insulation treatment, metal surface protection etc.,
SDSHobby
HIGH QUALITY 1 METER HEAT SHRINKABLE TUBING DIA. =7MM (BLACK COLOR)
| Type | 7mm |
| Color | Black |
| Length | 1 meter |
| Material | PVC |
| Working Temperature | -55 to 125 Celsius Degree |
| Temperature Resistance | 105 Celsius Degree |
| Shrink Ratio | ≥48±5%, 2 |
| Nominal Voltage | 300V |
Specifications:, Application:, The heat shrinkable tubing is mainly used for wire connection, solder joint protection, electronic device protection and insulation treatment, metal surface protection etc.,
SDSHobby
HIGH QUALITY 1 METER HEAT SHRINKABLE TUBING DIA. =6MM (RED, BLACK ,BLUE,YELLOW COLOR)
| Type | 6mm |
| Color | Red, Black ,Blue,Yellow |
| Length | 1 meter |
| Material | PVC |
| Working Temperature | -55 to 125 Celsius Degree |
| Temperature Resistance | 105 Celsius Degree |
| Shrink Ratio | ≥48±5%, 2 |
| Nominal Voltage | 300V |
Specifications:, Application:, The heat shrinkable tubing is mainly used for wire connection, solder joint protection, electronic device protection and insulation treatment, metal surface protection etc.,
SDSHobby
HIGH QUALITY 1 METER HEAT SHRINKABLE TUBING DIA. =5MM (RED, BLACK ,BLUE,YELLOW COLOR)
| Type | 5mm |
| Color | Red, Black ,Blue,Yellow |
| Length | 1 meter |
| Material | PVC |
| Working Temperature | -55 to 125 Celsius Degree |
| Temperature Resistance | 105 Celsius Degree |
| Shrink Ratio | ≥48±5%, 2 |
| Nominal Voltage | 300V |
Specifications:, Application:, The heat shrinkable tubing is mainly used for wire connection, solder joint protection, electronic device protection and insulation treatment, metal surface protection etc.,