HobbyKing
TURNIGY NANO-TECH 2200MAH 3S 35~70C LIPO PACK
| Discharge Plug | XT60 |
: 2200mAh, : 3S1P / 3 Cell / 11.1V, : 35C Constant / 70C Burst, : 199g (including wire, plug & case), : 115x35x27mm, : JST-XH, Suited to the following models:, ALIGN T-REX450, E-flite Blade 450 3D, BEAM E4, MSH Protos Mini, Furion 450, ThunderTiger E325/Mini Titan SE, Caliber 450V, CALIBER 400, RAVE 450, GAUI 330S,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
YAK 54 1.5M MONSTER 3D KIT ONLY V2 EPO
| Wingspan | 1500mm (59in) |
| Length | 1210mm (47.6in) |
| Wing area | 43.9dm2 |
| Wing load | 50.1g/dm2 |
| Flying weight | 2400g |
| ESC | 60A (Not Included) |
| Propeller | 14x7 |
| Required | TX & RX |
Motor:, 3740 Brushless outrunner 700kv (Not Included), Battery:, 3300mah 14.8V 4S lipo (Not Included), Servos:, 17g x 5 (Not Included), Channels:, 4 or 6 with ail/elev on 2channel each,
The YAK54 required a large 37 series outrunner and 60A ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 130MAH 1S 25~40C LIPO PACK (KYOSHO, EFLITE, PARKZONE ETC)
| Capacity | 130mAh |
| Dimensions | 39x12x7mm |
| Balance Plug | JST-XH |
| Discharge Plug | JST-XH |
Voltage:, 1S1P / 1 Cell / 3.7V, Discharge:, 25C Constant / 40C Burst, Weight:, 3.8g (including wire, plug & case), Suited to the following models:, E-flite MCX, MCX2, MSR,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
710MM MS COMPOSIT 3D NIGHT MAIN BLADES
| Length | 710mm |
| Width | 58mm |
| Grip | 12mm |
| Hole | 4mm |
5 Reviews
HobbyKing
107MM MS COMPOSIT 90 SIZE 3D NIGHT TAIL BLADE
| Length | 107mm |
| Grip | 5mm |
| Hole | 3mm |
5 Reviews
HobbyKing
MINIMOA 2MTR R/C GLIDER EPO W/ MOTOR, ESC, SERVOS PLUG-N-FLY
| Wing span | 2000mm/78.7in |
| Length | 980mm/38.6in |
| Weight | 720g/25.4 oz |
| ESC | 20A |
| Servo | 9gx4 |
| Required | Your own TX & RX |
Specification:, Motor:, 1200kv brushless outrunner, Battery:, 11.1V 2200mAh 3S Lipo,
This famous German glider designed in 1935 is almost a ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 2650MAH 6S 25~50C LIPO PACK
: 2650mAh, : 6S1P / 6 Cell / 22.2V, : 25C Constant / 50C Burst, : 399g (including wire, plug & case), : 149x44x31mm, : JST-XH, Discharge Plug:, 4mm Bullet-connector, Suited to the following models:, MIKADO LOGO400, ALIGN T-REX500, GUAI EP425/550/X5, Compass Atom 500, MSH Protos500;JR Vibe 500E,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
T-45 R/C EPO JET (KIT)
| Specifications | Wing Span |
| Length | 880mm |
| Flying weight | ~610g |
| Ducted fan | 64mm Fan unit (included) |
| Battery compartment | 90x46x46 (MAX) |
| Motor | B2040 Brushless inrunner (to suit 64mm EDF fan unit) |
| ESC | 30A |
| Servo | 3 x 9g |
| Radio | Your own Tx/Rx |
Radio Channels: 4, Required:, Battery 1500mah 3s1p,
The T-45 Is an aircraft carrier capable training jet still ...5 Reviews
HobbyKing
FRENZY 600BD V2 EP 3D HELICOPTER KIT (BELT DRIVE)
| Control System | 120° CCPM ( |
| Rotor Blade Length | 600mm-620mm |
| Length | 1220mm |
| Height | 445mm |
| Width | 234mm |
| Gear ratio | 8.6 |
| Main gear | 85T |
| Main rotor diameter | 1345~1365mm |
| Tail rotor diameter | 242mm |
| Main rotor length | 600~620mm |
| Flying weight | Approx 3750g |
| Tail rotor drive system | Belt Drive |
| Servos | 4 (standard size) |
| Radio Gear | Gyro/Rx |
| ESC | 100A or bigger |
| Blades | 600mm ~ 620mm |
Type:, Type:, 600 Class EP 3D Pro Helicopter, Key Features:, Strong yet lightweight G-10 side frames, Product Spec:, Pinion gear:, 10T (suit 5mm motor shaft), Motor:, 600 Class 850kv~900kv motor, Battery:, 22.2v 6S1P 3300mah or bigger, Rx Battery :, (UBEC with 2 Cell Lipoly),
An amazing quality kit, with excellent features and an advance ...HobbyKing
TZ-V2 .50 SIZE NITRO 3D HELICOPTER KIT (TORQUE TUBE)
| Length | 1250mm |
| Height | 429mm |
| Width | 231mm |
| Gear ratio | 8.27 |
| Pinion gear | 10T |
| Main gear | 85T |
| Main rotor diameter | 1345~1365mm |
| Tail rotor diameter | 242mm |
| Main rotor length | 600~620mm |
| Flying weight | Approx 3850g |
| Tail Rotor Drive System | Torque Tube |
| Radio Gear | Gyro/Rx |
| Rx Battery | (UBEC with 2 Cell Lipoly) |
Product Spec:, Type:, .50 size glow powered 3D Pro Helicopter, Control System:, 120° or 140° CCPM (140° Optional), Key Features:, Strong yet lightweight G-10 side frames,
The V2 .50 is a Nitro .50 size helicopter that ...5 Reviews
HobbyKing
TZ-V2 .90 SIZE NITRO 3D HELICOPTER KIT (TORQUE TUBE)
| Length | 1360mm |
| Height | 455mm |
| Width | 185mm |
| Gear ratio | 8.27 |
| Pinion gear | 11T |
| Main gear | 91T |
| Main rotor diameter | 1523~1563mm |
| Tail rotor diameter | 265mm |
| Main rotor length | 680~710mm |
| Flying weight | Approx 4600g |
| Control System | 120° CCPM |
| Rotor Blade Length | 680-710mm |
| Tail Rotor Drive System | Torque Tube |
| Radio Gear | Gyro/Rx |
| Rx Battery | (UBEC with 2 Cell Lipoly) |
Product Spec:, Type:, .90 size glow powered 3D Pro Helicopter, Key Features:, Strong yet lightweight G-10 side frames,
The V2 .90 is a Nitro .90 size helicopter that ...5 Reviews
HobbyKing
FRENZY 600TT V2 EP 3D HELICOPTER KIT (TORQUE TUBE)
| Control System | 120° CCPM |
| Rotor Blade Length | 600mm-620mm |
| Length | 1220mm |
| Height | 440mm |
| Width | 234mm |
| Gear ratio | 8.6 |
| Main gear | 86T |
| Main rotor diameter | 1345~1365mm |
| Tail rotor diameter | 242mm |
| Main rotor length | 600~620mm |
| Flying weight | Approx 3800g |
| Tail rotor drive system | Torque Tube |
| Radio Gear | Gyro/Rx |
| ESC | 100A or bigger |
| Blades | 600mm ~ 620mm |
Type:, Type:, 600 Class EP 3D Pro Helicopter, Key Features:, Strong yet lightweight G-10 side frames, Product Spec:, Pinion gear:, 10T (suit 5mm motor shaft), Motor:, 600 Class 850kv~900kv motor, Servos:4, Battery:, 22.2v 6S1P 3300mah or bigger, Rx Battery :, (UBEC with 2 Cell Lipoly),
An amazing quality kit, with excellent features and an advance ...5 Reviews
HobbyKing
HOBBYKING J3 CUB - PLUG AND FLY (YELLOW)
| Wingspan | 1030mm |
| Fuselage length | 715mm |
| ESC | A-ZTW20A BEC ESC |
| Servo | 4 x 9g PZ-15178 |
| Motor | GC-1300kv |
| Battery compartment size | 70x40x32mm |
| Required | Your TX & RX |
Specs:, Battery:, 11.1V 3S 800~1200mah lipoly,
The HobbyKing J3 Cub is a faithful representation of this ...5 Reviews
HobbyKing
HOBBYKING J3 CUB - KIT (YELLOW/BLUE)
| Wingspan | 1030mm |
| Fuselage length | 715mm |
| ESC | 20A (Required) |
| Servo | 4 x 9g (Required) |
| Battery compartment size | 70x40x32mm |
| Prop | 8.5x9 (Included) |
| Required | 20A ESC |
Specs:, Motor:, 24xx Bell Motor 1200~1300kv (Required), Battery:, 11.1V 3S 800~1200mah lipoly, Note:, The Turnigy Bell 2409-18T 1200kv is a perfect motor for this model.,
The HobbyKing J3 Cub is a faithful representation of this ...5 Reviews
HobbyKing
SKYFUN JET (KIT ONLY)
| Wingspan | 875mm |
| Length | 700mm |
| Height | 170mm |
| Motor Mount Holes | 19mm or 16mm |
| Motor Mount Holes | 19mm or 16mm |
| ESC | 25A (Required) |
| Servo | 2 x 9g (Required) |
| Prop | 6 x 4 (2 included) |
| Motor | Turnigy 2836-2350kv |
| ESC | Turnigy Plush 60A |
| Battery | 1800mAh |
| Prop | 6x4 Sports |
Specification:, Dry Weight:, 302g (No Electronics), Motor:, 28xx-1800kv Brushless Outrunner (Required), Required:, 28xx-1800kv Brushless Outrunner, Note:, For a more powerful setup try the following.,
The Skyfun can be used by novice and advanced pilots ...5 Reviews