HiModel
HIMODEL (APLUS, ALIGN) 3-PIN/2S FEMALE TO POLYQUEST MALE ADAPTOR CABLE
Polyquest Male Adaptor ..." />
| Length | 15cm (including connectors) |
, , , , , , Specifications:, , , , , , , , , , , HiModel (Aplus, Align) 3-pin/2S Female to Thunder Power Male Adaptor Cable, Compatible with most of chargers from E-sky, RC-Power, Maxpro, Smart plus, Dynam and HiModel etc., , ,
Features: HiModel (Aplus, Align) 3-pin/2S Female to Polyquest Male Adaptor ...Flying-Hobby
BALANCING ADAPTOR BOARD FOR POLYQUEST
,
EAC123 PB-6 connection cable set for Lithium battery pack (2S~6S) ...HobbyKing
POLYQUEST 5400MAH 2S RLP RACING LIPO PACK
| Capacity | 5400mAh |
| Voltage | 7.4V |
| Constant dis | 18C |
| Dimension(mm) | 137 * 46.5 * 24mm |
| Weight | 288g (including plug/case everything..) |
5 Reviews
ReadyMadeRC
CELLPRO POWERLAB-TO-THUNDERPOWER (MOLEX) OR POLYQUEST (YEONHO)
,
This adapter supports one battery pack at a time and ...Hobby-Lobby
EXTREME POWER ANALYZER
Jason Says: "How did I live before this. Battery fuel gauge, check. Balancer, check. Watt Meter, check. This thing does it all." A Watt-Meter, Voltage Checker and Cell Balancer all in one economical package Don't go to the flying field without one. Check the charge on a pack before or after a flight, balance an out of balance pack and check the Amps, Volts and Watts of your power system all with this one easy to use device. To use with Thunder Power or Flight Power packs, order adapter SRC510 . To use with PolyQuest (Enerland) or Hyperion packs, order adaptor SRC513 . The Power Analyzer has three functions: Watt Meter: Measures current (Amps), voltage (Volts), power (Watts) and charger (Amp-hours). Voltage Checker: Check the individual cell voltages of 1 to 6 cell lithium battery packs. Handles all types of lithium batteries (LiPo, LiIon, LiFe). Cell Balancer: Integrated balance circuit will balance your pack without connection to a charger. Battery pack will be equalized to the lowest cell voltage of the pack. (*1) 0V minimum with auxiliary power (*2) 50A continuous, 100A peak, assumes device attached to connections at or below temperature of 35°C with adequate air flow. 100A operation time depends on ambient temperature and wiring temperature. In Watt-Meter mode, you can calibrate all values to zero by pressing "SELECT" button for more than 3 seconds. Power Analyzer PDF Instruction Manual Technical Specifications: Extreme Power Analyzer Specs: Voltage: 0-60V (*1), Resolution 0.01V Current: 0-100A peak (*2), Resolution 0.1A Power: 0-6000 W, Resolution 0.1W Cell Count: 1-6 Cells Battery Type: LiPo, LiIon, LiFe Dimensions: 4.06 1.95 x.79" (103 x 49.5 x 20mm) Net Weight: 3.7 oz. (105g) Display: 16 Character x 2 row LCD, ,
Jason Says: "How did I live before this. Battery fuel ...HobbyKing
TURNIGY 10XC TP/PQ BALANCE ADAPTOR BOARD
Polyquest balance adaptor board for the ..." />
Packs Supported:, PolyQuest, ThunderPower, Flight Power and any others using TP/PQ style balance leads.,
This is a 2~6S Thunderpower/Polyquest balance adaptor board for the ...HobbyKing
FATBOY 8 TP/PQ BALANCE ADAPTOR BOARD
Polyquest balance adaptor board for the ..." />
Packs Supported:, PolyQuest, ThunderPower, Flight Power and any others using TP/PQ style balance leads.,
This is a 2~6S Thunderpower/Polyquest balance adaptor board for the ...HobbyKing
BM-6 CELL VOLTAGE MONITOR 2-6S LIPO (NEW VERSION)
| Voltage display resolution | 0.001V |
| Voltage Detection precision | 0.005V |
| Cell Voltage display range | 1.50-4.99V |
| Total Voltage display range | 3.00 ~29.94V |
| Alarm cell voltage | 2.00 ~ 4.00V |
| Current loading of test | 8 mA |
| Weight | 12g |
| http | //www.chargery.com/doc/Chargery%20BM6%20specification.pdf |
Specifications:, Battery range:, 2S-6S Lipo/Li-ion/LiFe, Pins distance:, to suit JST-XH type balance plug. (also Polyquest etc), Size:, 80 * 25 * 12 (L*W*T, mm ),
Users manual download;5 Reviews
ReadyMadeRC
HITEC H4 DC/DC MULTI-CHARGER 4 PORT MICRO PROCESSOR CHARGER
| Stock# 44152 | Flight Power/Thunder Power Battery Adapter |
| Stock# 44153 | PolyQuest/HP Battery Adapter |
| Stock# 44154 | Molex EH Balancing Adapter |
| Stock# 44155 | Molex XH Balancing Adapter |
| Stock# 44178 | Universal Balancing Board |
Input Voltage Range:, DC 12 - 18 Volts DC, Required Input Amperage:, 40 Amps / 500 Watts, Charger Circuit Power:, , Discharge Circuit Power:, 10 watts x 4 or 20 watts x 2 Using Channel Bridge Function, Charge Current Range:, , Discharge Current Range:, 0.1 - 2.0 Amps per Channel or 0.1 - 4A Using Channel Bridge Function, LiPo,LiFe & LiIon Balancing Current Drain:, 200mA per Cell, LiPo,LiFe & LiIon Cell Count:, 1 - 6 Cells, Maximum NiCd/NiMh Cell Count:, 1 - 15 Cells, Lead Acid (Pb) Cells / Voltage:, 2 - 20 Volts, Dimensions (W x D x H):, 8.1" x 6.4" x 2.0", Weight:, 3.2 lbs,
Its sleek, aluminum design, easy-to-read backlit graphic display and four ...HobbyKing
CY- B6 PLUS BALANCER CONNECTOR
Polyquest, ..." />
,
For use with CY-B6 Balancer Specially designed to balance Polyquest, ...5 Reviews
HobbyKing
VIEWPRODUCT | FEMALE JST-XH
Polyquest 3S (10cm) Listing is for ..." />
,
Female JST-XH <-> Male Polyquest 3S (10cm) Listing is for ...HobbyKing
VIEWPRODUCT | MALE JST-XH
Polyquest 5S (10cm) Listing is for ..." />
,
Male JST-XH <-> Female Polyquest 5S (10cm) Listing is for ...