ReadyMadeRC
Air Titan Kit (Hardware included) No Electronics
| ATTENTION | According to |
| Wingspan | 2520MM/ 99.2inch |
| Kits Airplane weight | 2.4kg(5.3IB) including all reinforcement parts |
| Extra Payload | 3.0kg-4.0kg (6.6IB-8.8IB)/ flight weight>6.0kg |
| Customized Motor for Airtitan | M60K/ Power 1500W |
| Testing static thrust | 5.5-6.0kg (6S, 15" Prop) |
| Propeller recommend | 15*6 / 15*7 |
| ESC | Advanced 80A OPTO (without Built-in BEC) |
| External UBEC | 5V/6A,5.5V/6A or 6V/6A (Switchable) |
| Material of fuselage and Wing | EPO |
| RMRC 6s batteries found here | 10,000 mAh |
| Main-wing | built- in 4PCS alloy aluminum plus 2PCS carbon tube through the Main-wing |
| Control surface of Aileron and Elevator | carbon tube reinforced, no need further DIY |
Breakdown for Transport:, This plane carries over the “gentle stall” characteristics of the Penguin, but super sized. No scary tip-stalls. Instead, it has super predictable flight characteristics. Tricycle landing gear with a steerable nose gear is included, along with a stable high wing design, plus a bottom camera port, and secondary top camera mounting area. The ARF version includes an 80A OPTO ESC, Massive 1500W motor, a switch mode 5-6V adjustable UBEC, and heavy duty metal geared servos for the ailerons, elevator, and steering. Hand launch is possible, but you might need to work out a bit before you try it (see beginning of video!). Like the Penguin, this airframe was designed with FPV in mind, but would also serve as a great plane to fly at the field if you just want something you can strap a GoPro to, or maybe even 10 of them since it won’t mind the weight. Available and ready to ship now at Ready Made RC, LLC, the best place to get ALL your FPV and RC equipment!, Specifications:, , Customized Brushless Power system:, Servos:, , Battery Recommendations:, , Flight Recomendations:, *Note : 5S with a 15*8 Prop is okay if your flight weight is less than 5.5kg. A 6S pack will however provide “better power", *Note: Flight weight of 5.5kg-6.0kg can meet most FPV requirements, and we recommend less than 6.0kg for most FPV pilots, High Quality Reinforcement :, , Horizontal stabilizer:,
UN1133 shipping regulations, the glue contained in t
his product
cannot
ship via Air service.
We will remove
the glue for Air or International orders.
Air Titan Kit with hardware included (No electronics)
Presenting the Air Titan from Finwing! These planes live up to their name, as they sport a wingspan that’s over 2.5 meters (99.2") and a massive amount of space inside for equipment and batteries. We ordered batteries specifically to go with this plane, and we’d recommend going with the 6s 10000mAh or 12400mAh batteries linked in the product listing along with a 15x8” APC prop. On our prototype model, it weighed over 12 lbs fully loaded and still was able to fly vertically with their power system. Yes…a 2.5M 12lb FPV plane that can fly vertical. It’s an amazing sight!
Does not include propeller.
We recommend
APC 15x8E
3PCS -
6kg
Torque/CM Metal gear servo (For Aileron and steerable landing gear)
1PCS - 2.5kg Torque/CM Metal Gear Servo (Elevator)
2PCS - 2.2kg Torque/CM Plastic Gear Servo (Rudder)
Recommend 5S-6S Lipo 10000mah (7S or more cells lipo battery is not advised)
and
12,400 mAh
Payload 3.0Kg equal to total flight weight approximately 5.5kg
Payload 4.0kg equal to total flight weight approximately 6.5kg
The heavier flight weight the better flying skills required.
is it possible to fly with 3S in serial or 4S lipo battery?
please check the FAQ
Stainless steel servo horn and Aluminium clevis
Air Titan Manual
Package Dimensions - 50x16x13"
Video Build Log by "RC Channel"
HER
E
ONLY ONE PLANE PER ORDER!
IF YOU WANT TO PURCHASE MULTIPLE PLANES YOU WILL NEED TO SUBMIT MULTIPLE ORDERS SO THE SHIPPING RATES ARE CALCULATED PROPERLY.
Check price and availability
Found 8 years, 8 months ago