SDSHobby
HSP 1/10TH SCALE ELECTRIC POWERED RALLY MONSTER(MODEL NO.:94170)
Specifications | Length |
Width | 250mm |
Height | 160mm |
Wheelbase | 275mm |
Gear Ratio | 1ï1⁄4š8.038 |
Ground Clearance | 26mm |
Wheel Diameter | 86mm |
Wheel Wldth | 32mm(Front)40mm(rear) |
Motor Brand | RC540 |
SDSHobby
ROLL CAGE A
. Included | 1pcs* roll cage A, 2pcs*joint rods for body mount |
SDSHobby
GASOLINE TANK COVER ACCESSORY
suitable for engine (item number | GE85035, GE85036, GE85071, GE85111 |
Application:,
ï1⁄4Œ GE85112)SDSHobby
HSP FLAT HEAD SCREW 3*16 10PCS FOR ITEM NUMBER CN94122/ CN94155/ CN94166/ CN94188 OF 1/10 HSP CAR
,
This Part can use for CN94122/CN94155/CN94166/CN94188SDSHobby
HSP BALL END A 4PCS FOR ITEM NUMBER CN94122 OF 1/10 HSP CAR
,
This Part can use for CN94122SDSHobby
HSP 1/8 SCALE BRUSHLESS ELECTRIC OFF-ROAD TRUGGY RTR (MODEL NO.:94886E9) WITH 2.4G RADIO, 2400KV MOTOR, 9.6V 3600MAH BATTERY
Length | 550mm |
Width | 440mm |
Height | 198mm |
Wheelbase | 370mm |
Ground Clearance | 42mm |
Gear Rate | 12.224 |
Chassis Material | 6061 aluminum |
Radio Control | 2.4G 3 channels |
Brushless Motor | 2400KV |
ESC | 80A with fan |
Battery | 9.6V 3600mAh Battery |
Technical Parameters:, Package Contents:,
Electric Off-Road Truggy 94886E9 .4G 3 channels Radio Control Brushless ...SDSHobby
HIGH-STRENGTH NYLON 2ND GENERATION INNER FRAME (A PAIR)
This item can be used on these cars, item number | CG260A |
CG290SC, also it can be used on Japanese HPI 1 | 5 gasoline cars. |
Application:,
ï1⁄4Œ CG260B ï1⁄4Œ CG260S ï1⁄4Œ CG260T ï1⁄4Œ CG290 ï1⁄4Œ CG290S ...SDSHobby
LEOPARD SENSORLESS BRUSHLESS COMBO FOR 1/10 CAR (60A+13T)
Leopard 60A Brushless ESC V2 | Forward /Brake or Forward/ Brake/ Reverse |
Input | 2-3S LiPo, 4-8S Ni-MH/Ni-Cd |
Resistance | 0.001 Ohms every phase |
Continuous /Burst Current | 60Amp/90Amp |
Linear Mode BEC | 5V 2Amp |
Input | 2S-3S LiPo |
2S LiPo, On-Road | ≥9.0T Off-Road≥10.0T |
3S LiPo, On-Road | ≥10.0T Off-Road≥13.0T |
Overheat Protection | yes |
Size (L*W*H) | 51.6*30*27.4mm (2.03*1.18*1.08in) |
Weight (without wire) | 78g (2.75oz) |
Sensored /Sensorless | sensorless |
No Load Current @7.2V | 1.2A |
Suitable for Motor | 13T |
Max current | 51A |
KV value | 3000KV |
Resistance (Ω) | 0.0246Ω |
Battery range | 1-3S |
Diameter | 36mm |
Motor length | 50mm |
Max Temperature | 150 |
Extend shaft Diameter | 3.165mm |
Length of extend shaft | 15mm |
Weight | 176g |
Connector Type (Banana Connector) | 3.5mm |
Suitable for Motor:, Poles: 2P,
Leopard 60A Brushless ESC : Leopard Brushless Motor for Car ...SDSHobby
2.4G 1/8 25CXP 4WD NITRO OFF-ROAD TRUCK RTR W/GO ENGINE, FOUR-WHEEL DRIVE
Gear Rate.....................L26.8 | 1; H17.1 |
Remote control system | 2.4G Radio |
Technical Parameters:, Length.........................510 mm, Feature:, 1. Powerful 25CXP engine with pull-starter,
Width...........................435 mm Height..........................230 mm Wheelbase..................350 mm Wheel Diameter..........154*85 mm Weight..........................4800g ...SDSHobby
1/10 SCALE RC BRUSHLESS ELECTRIC OFF-ROAD BUGGY CAR RTR #102451 WITH 2.4G RADIO, 4WD SYSTEM, 3900KV MOTOR, 7.2V 3000MAH BATTERY
Technical Parameters:, Gear Rate...................................11.5:1, Features:, Notes:, The servo must be set at the neutral position before assembly. Firstly, turn on the transmitter and receiver in succession; then pull the trim tabs to the neutral position, and turn off the receiver and transmitter, the servo will be at neutral position,
Length.........................................405mm Width...........................................240mm Height.........................................130mm Wheelbase.................................275mm Wheel Diameter..................................88mm*34mm (R)/ 88mm*31mm (F) Tread(F/R)................................. ...