HiModel
E-SKY V3 LAMA CO-AXIAL EP HELICOPTER RTF 40MHZ
| Main rotor diameter | 340mm; |
| Weight | 215g |
| Length | 360mm |
| Power System | 180 motor*2 |
| Transmitter | 4 ch |
| Mix controller | 4 in 1 controller (W/gyro, mixer, ESC, receiver); |
| Servo | 8g, 1.3kg/cm, 0.12s/60 |
| Battery | 7.4V 800mAh Li-polymer Battery |
| Transmitter Mode | Model I ( Throttle on right hand) and Model II ( Throttle on left hand) optional. |
, , , , , , Specifications:, , , , , , , , , , , ( Please specify Mode of transmitter in the remark field when placing an order ), , ,
Features: LAMA V3 which is with double-blade-sharing-one-axis structurer and with ...HiModel
35MHZ E-SKY HONEY BEE KING 2 ELECTRIC HELICOPTER RTF (YELLOW) EK1H-E017A
| (3).Main blade diameter | 600mm |
| (4).Tail blade diameter | 130mm |
| (6).Main drive gear | 140T |
| (7).Drive gear rate：9 | 140T |
, , , , , , Specifications:, , , , , , , , , , , [Specification]:, (1).Length：535mm, (2).Height：225mm, (5).Motor gear:9T, (8).Weight：470g(with 1000mAh,11.1V);, , ,
Features: 1).Adopted CCPM (Collective cyclic pitch mixing) system, make rolling, ...HiModel
E-SMART ELECTRIC 3D HELICOPTER (CARBON FIBER & METAL VERSION) W/MOTOR EK5H-E002
| (4).Main blade diameter | 1185mm; |
| (5).Tail blade diameter | 220mm; (6).Engine Drive Gear |
| (7).Main Drive Gear | 120T; |
| (9).Empty weight | 1600g; |
| Type | EK5-0007 |
| Motor weight | 305g |
| Motor Length | 63.5mm |
| Motor Diameter | 43.0mm |
| Shaft diameter | 5mm |
| No load current | 5.0A |
| Max current | 50A |
| Speed controller requirement | 80A |
| (1).Lithium Battery | 6S2P |
| (2).Brushless motor | 1200RPM/V |
| (3).Transmitter | 6 channel or more(Helicopter system) |
| (4).Receiver | 6 channel or more |
| (5).Gyro | 1pcs |
| (6).servo | Above 38g,4pcs |
| (7).Speed Controller | 70A or above |
, , , , , , Specifications:, , , , , , , , , , , 【Specification:】, (1).Length：1070mm;, (2).Height：370mm;, (3).Width：210mm;, (8).Gear ratio:1:12:4.62;, 【Brushless motor specification:】, KV: 1200, 【Recommended Power and Radio Equipment(Not included in kit):】, , ,
Features: This is the carbon fiber and metal version of ...HiModel
BLACK HAWK CCPM 450 3D HELICOPTER W/MOTOR,35A ESC HP-450EP
| Manufacturer code | HP-450EP |
, , , , , , Specifications:, , , , , , , , , , , Fully assembled and ready to install your 6 channel heli radio(CCPM), gyro, and 2100mAh to 2200mAh LiPo Battery., LENGTH：630MM, WIDTH：120MM, HIGHT：230MM, LENGTH FOR MAIN ROTOR BLADE：300MM, LENGTH FOR TAIL ROTOR BLADE：55MM, WEIGHT：370G, , ,
Features: - Fully Assembled. - Fiberglass main frame - Includes ...HiModel
T-REX 450SE(CDE) KIT +NEW 430L3550+35G ESC + 2100MAH LIPO (SILVER KX015046TA)
| ●Length | 650mm |
| ●Height | 230mm |
| ●Main Rotor | 680/700mm |
| ●Tail Rotor | 150mm |
| ●Motor Gear | 13T/11T |
| ●Main Gear | 150T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(without power system) | 365g |
| ●Weight(including power system) | 690g |
, , , , , , Specifications:, , , , , , , , , , , ●Drive Gear Ratio:1:11.5:4.24/1:13.6:4.24, , ,
Features: 【Arrived with 80% pre-assembled】 T-Rex 450 Superior Edition (eCCPM) ...HiModel
T-REX 450XL(HDE) KIT + 430L3550 MOTOR +25A ESC
| ●Length | 650mm |
| ●Height | 230mm |
| ●Main Rotor | 680/700mm |
| ●Tail Rotor | 150mm |
| ●Motor Gear | 15T/13T/11T |
| ●Main Gear | 150T |
| ●Autorotation Tail Drive Gear | 109T |
| ●Tail Drive Gear | 22T |
| ●Weight(without power system) | 330/355g |
| ●Weight(including power system) | About 620-670g |
, , , , , , Specifications:, , , , , , , , , , , ●Drive Gear Ratio:, 1:10:4.95/1:11.5:4.95/1:13.6:4.95, , ,
Features: 【Kits Packing】 Product package: a T-REX 450XL helicopter's kit, ...HiModel
M2 X 12 CAP SCREWS FOR SJM400 V2 SJ20011
| Manufacturer code | SJ20011 |
, , , , , , Specifications:, , , , , , , , , , , M2 x 12 Cap screws for SJM400 V2, , ,
Features: M2 x 12 Cap screws for SJM400 V2 Includes/Requires: ...HiModel
FLYBAR MIXING ARM FOR SJM400 AL1026
| Manufacturer code | AL1026 |
, , , , , , Specifications:, , , , , , , , , , , Flybar mixing arm for SJM400 3D Electric helicopter, , ,
Features: Flybar mixing arm for SJM400 3D Electric helicopter. Includes/Requires: ...HiModel
MAIN FRAME BOARD LINK FOR SJM400 AL1027
| Manufacturer code | AL1027 |
, , , , , , Specifications:, , , , , , , , , , , Main frame board link for SJM400 3D Electric helicopter, , ,
Features: Main frame board link for SJM400 3D Electric helicopter. ...HiModel
TAIL BOOM KNIGHTHEAD LINK FOR SJM400 AL1038
| Manufacturer code | AL1038 |
, , , , , , Specifications:, , , , , , , , , , , Tail boom knighthead link for SJM400 3D Electric helicopter, , ,
Features: Tail boom knighthead link for SJM400 3D Electric helicopter. ...HiModel
BOARD OVER MAIN FRAME FOR SJM400 FG1003
| Manufacturer code | FG1003 |
, , , , , , Specifications:, , , , , , , , , , , Board over main frame for SJM400 3D Electric helicopter, , ,
Features: Board over main frame for SJM400 3D Electric helicopter.HiModel
FG BOARD UNDER MAIN FRAME FOR SJM400 PRO ELECTRIC HELICOPTERS FG3002-F
| Manufacturer code | FG3002-F |
, , , , , , Specifications:, , , , , , , , , , , FG board under main frame for SJM400 Pro Electric Helicopters, , ,
Features: FG board under main frame for SJM400 Pro Electric ...HiModel
CF LANDING SKID FOR SJM400 PRO ELECTRIC HELICOPTERS FG3003-C
| Manufacturer code | FG3003-C |
, , , , , , Specifications:, , , , , , , , , , , CF landing skid for SJM400 Pro Electric Helicopters, , ,
Features: CF landing skid for SJM400 Pro Electric HelicoptersHiModel
LINKAGE OF TAIL PITCH-ADJUSTING DEVICE FOR SJM400 V2 AL2033
| Manufacturer code | AL2033 |
, , , , , , Specifications:, , , , , , , , , , , Linkage of tail pitch-adjusting device for SJM400 V2, , ,
Features: Linkage of tail pitch-adjusting device for SJM400 V2HiModel
MAIN ROTOR BLADE CENTER FOR SJM400 AL1017
| Manufacturer code | AL1017 |
, , , , , , Specifications:, , , , , , , , , , , Main rotor blade center for SJM400 3D Electric helicopter, , ,
Features: Main rotor blade center for SJM400 3D Electric helicopter. ...