HobbyKing
HK-500GT PINION GEAR 5MM/13T (ALIGN PART # H50060)
,
HK-500GT Pinion Gear 5mm/13T (Align part # H50060)5 Reviews
HobbyKing
GWS PG-02 PIEZO GYRO/FUTABA
| Dimension | 28.5 x 26.5 x 11mm |
| Power supply | 4.8~6V |
| Current drain | 30mA (At 4.8V) |
| Operating temperature | -5~+50C |
Specification:, Weight:, 11g(Gyro only) 13g (with gyro mount), Gain adjustment:, Dual-Gain (Remote control), Applicable R/C systems:, Futaba, JR, Hi-Tec, Sanwa/Airtronics Multiplex, GWS,
5 Reviews
HobbyKing
TURNIGY R/C UNIVERSAL MAIN BLADE BALANCER (CARBON FIBER)
,
Turnigy R/C Universal Main Blade Balancer (Carbon Fiber)5 Reviews
HobbyKing
EC-135 COAX EUROCOPTER W/ 2.4GHZ TX & LIPO (LARGE 450 SIZE)
| Main Rotor Diameter | 450mm (17.7 inch) |
| Length | 490 mm (19.29 inch) |
| Height | 260 mm (10.23 inch) |
| Flying Weight | 380g (13.4 oz) |
| Servo | 2 x 9g servos |
Specifications:, Driven system:, 2 x 370 carbon brush motor, Battery:, 7.4V 1000mAh Lipo battery, Control system:, 4CH 2.4GHz Transmitter, Required:, 8 x AA Batteries for the Transmitter,
A big 450 size heli thats fantastic looking, and is ...3 Reviews
HobbyKing
ULTRA-THIN PRISMATIC PRE-CUT STICKER 342X43MM (4 PAIRS)
| Dimensions | 342x43mm |
5 Reviews
HobbyKing
ROTORTECH LUMINOUS 40-50 SIZE NIGHT BLADE POWER PACK ONLY
,
Power pack for RotorTech 40-50 night blades.HobbyKing
TURNIGY 4MM BALL END REAMER
,
Turnigy 4mm Ball End Reamer Ultra strong steel tip, and ...5 Reviews
HobbyKing
FRENZY 600BD V2 EP 3D HELICOPTER KIT (BELT DRIVE)
| Control System | 120° CCPM ( |
| Rotor Blade Length | 600mm-620mm |
| Length | 1220mm |
| Height | 445mm |
| Width | 234mm |
| Gear ratio | 8.6 |
| Main gear | 85T |
| Main rotor diameter | 1345~1365mm |
| Tail rotor diameter | 242mm |
| Main rotor length | 600~620mm |
| Flying weight | Approx 3750g |
| Tail rotor drive system | Belt Drive |
| Servos | 4 (standard size) |
| Radio Gear | Gyro/Rx |
| ESC | 100A or bigger |
| Blades | 600mm ~ 620mm |
Type:, Type:, 600 Class EP 3D Pro Helicopter, Key Features:, Strong yet lightweight G-10 side frames, Product Spec:, Pinion gear:, 10T (suit 5mm motor shaft), Motor:, 600 Class 850kv~900kv motor, Battery:, 22.2v 6S1P 3300mah or bigger, Rx Battery :, (UBEC with 2 Cell Lipoly),
An amazing quality kit, with excellent features and an advance ...HobbyKing
FPV TILT CAMERA MOUNT WITH LANDING GEAR
| Skid width | 190mm |
| Skid length | 290mm |
| Camera mount area width | 110mm |
| Camera mount area height | 100mm |
| Material | Fibre Glass |
| Required | 1 x 9g Servo |
Spec:, Height:, 185mm (to mounting plate), Dry Weight:, 188g (not including servo),
The HobbyKing FPV tilt camera mounting system is a simple ...5 Reviews
HobbyKing
HELICOPTER UNIDIRECTIONAL STARTER (DETATCHABLE)
| Features | Blue aluminum base |
| Overall length | 260mm |
Requires:, Standard aircraft starter,
Steel shaft with 6mm uni directional ball hex One way ...5 Reviews
HobbyKing
RJX X-50 FLYBARLESS HEAD KIT FOR 8MM MAIN SHAFT
,
RJX X-50 Flybarless Head Kit for 8mm Main Shaft *This ...5 Reviews
HobbyKing
MAIN BLADES HOLDER FOR ALIGN T-REX600 & 50 SIZE HELI
,
Main blades Holder for Align T-rex600 & 50 size heli