RCTimer
TS-9018 MICRO SERVO 9G/1.5KG/0.10SEC
| *Model. | TS-9018 |
| *Size | 23.0 x 12.5x 30.0mm |
| *Operating Speed | 0.10sec/60o |
| *Stall Torque | 1.5 kg/cm |
| *Operating Voltage | 4.80-6 Volts |
| Package | 1 pcs |
*Weight:9g,
Specification Excellent quality servos, anyone that has used these is ...HobbyKing
SW4805-6PA SAILWINCH SERVO 6.13KG/45G/0.70
| Operating Temperature Range | -10°C ~ +60°C |
| Operating Voltage Range | 4.8~6V |
| Speed(4.8V) | 0.9sec/360 |
| Speed(6.0V) | 0.7sec/360 |
| Torque(4.8V) | 5.25kg.cm |
| Torque(6.0V) | 6.13kg.cm |
| Size | 40.5X20.2X38mm |
| Weight | 45g |
| Connector Wire Length | JR 265 mm |
Specs:, Turn:6T, Gears:, heavy duty resin (plastic),
SW4805-6PA sailwinch servo5 Reviews
Hobby-Lobby
UNIVERSAL IRON/OILITE BUSHING
,
Universal Iron/Oilite Bushing Universal Iron/Oilite BushingHobby-Lobby
DIGITAL SERVO AND RECEIVER CURRENT METER
| Configuration | 5S1P |
| Weight | 16.9 oz. |
| Dimensions | 39 x 42 x 133.2mm |
| Charge Rate | 1C (3.6A) |
| Continuous Discharge | 25C (90A) |
| Min Discharge Volts Per Pack | 15V |
| Max Burst Rate | 35C (126A) |
| Max Volts Per Cell | 4.2V |
| Max Volts Per Pack | 21V |
| Watt Hours | 66.6 |
Technical Specifications:, 25C 5S 3600mah 18.5v LiPO Specs:, Battery Type:, Lithium Polymer (LiPO),
Digital Servo and Receiver Current Meter Hangar 9's new Digital ...Hobby-Lobby
MN48 MINI SERVO
| Bearing | Single |
| Bushing Or Bearing | Bearing |
| Gear Type | Plastic |
| Height | 1.02 in (25.9mm) |
| Length | 1.30 in (33.0mm) |
| Size Category | Minis and Micros |
| Speed (at 4.8V) | .15 - .19sec |
| Torque (at 4.8V) | 40 - 99 oz-in |
| Type | Analog |
| Weight | 0.8 oz (22.7g) |
| Width | 0.58 in (14.7mm) |
MN48 Mini Servo Highlights:, Ultra precise centering and movements, Technical Specifications:, MN48 Mini Servo Specs:, Application:, 20- to 40-size Aircraft, Speed:, 0.18 sec/60° @ 4.8V; 0.15 sec/60° @ 6.0V, Torque:, 48 oz-in (3.5kg-cm) @ 4.8V,
MN48 Mini Servo RC has never been more affordable to ...HobbyKing
HOBBYKING BL-83601 DIGITAL BRUSHLESS MG HV 14.5KG / 0.13 / 56G
| Voltage | 6.0v / 7.4v |
| Weight | 56.4g |
| Gear Train | Full Titanium Alloy |
| Motor | Brushless |
Specs:, Speed:, 0.16sec/60deg (6.0v) - 0.13sec/60deg (7.4v), Torque:, 10.4kg.cm (6.0v) - 14.5kg.cm (7.4v), Size:, 40mm x 20mm x 37.5mm, Casing:, alloy heatsink Centre, Ball Bearing:3, Lead:, 300mm HD with Universal/JR Plug,
The Hobbyking Brushless series use low drain brushless motors for ...HobbyKing
TURNIGY TGY-5513MD METAL GEAR DIGITAL SERVO 12KG / 0.18SEC / 54.5G
| Model | TGY-5513MD |
| Dead band | 2us |
| Working frequency | 1520us / 330Hz |
| Operating voltage | 4.8~6.0V |
| Operating speed (4.8V) | 0.20sec/60° |
| Operating speed (6.0V) | 0.18sec/60° |
| Stall torque (6.0V) | 12.25kg.cm |
| Connector wire length | 265mm |
| Dimensions | 40.5x20.2x44.2mm |
| Weight | 54.5g |
Stall torque (4.8V):, 11.89kg.cm (165.15 oz/in),
The Turnigy TGY series offers excellent performance and quality at ...5 Reviews
HobbyKing
TURNIGY TGY-R5180MG 180 DEGREE METAL GEAR ANALOG SERVO
| Weight | 12g |
| Torque | 2.0kg.cm (6.0v) |
| Voltage | 4.8-6.0v |
| Type | Analog Micro |
| Gear Train | Meta |
| Lead Length | 180mm |
| Plug | JR/Futaba |
Specs:, Size:, 23.2mmx12.0mmx21.6mm, Speed:, 0.12sec/60deg (4.8v) - 0.10 sec/60deg (6.0v), Ball Bearing:No,
Turnigy metal gear analog mini servo with 180 degree stop ...5 Reviews
HobbyKing
FUTABA SERVO ARM SET
,
Futaba Servo Arm Set *Color may vary from photo.5 Reviews
HobbyKing
DIGITAL SERVOLESS RETRACTABLE SYSTEM (1PC)
| Working voltage | 4.5~5.5V |
| Speed | 0.7s/60deg 4.8v - 0.55/60deg 6v |
| Idle current | 3mA |
| Angle limit | 90 degree when retracted |
| Operating temp | -10~50C |
| Shaft size | 3mm |
| Mounting area size | 35mm x 33mm |
| Length | 67mm |
Features:, Robust landing gear strut and mounting bracket,
The easiest way to put retracts in your plane. No ...5 Reviews
HobbyKing
HOBBY KING S1 SERVO DOCTOR W/ GYRO SENSOR
| Input voltage | 8~12V (2S lipo or 9V 2A DC power supply) |
| Accuracy | 1us +/- 10% |
| Weight | 21g |
| Size | 69x33x11mm |
| Operating temperature | -10~50°C |
Specifiaction:, Output voltage: 5V, Output current: 1A,
Hobbyking S1 servo tester is specifically designed to accurately measure ...5 Reviews
HobbyKing
TURNIGY 3 CHANNEL SERVO SPEED/DIRECTION REGULATOR
: 3g, : 1 servo Channel., : 3 Channels., : Travel Speed & Travel Time in both directions.,
A fully adjustable 3 channel-out Servo Regulator which can be ...5 Reviews