HobbyKing
TURNIGY PLUSH 6A /.8BEC/6G SPEED CONTROLLER
| Model | Plush 6A |
| BEC | Linear |
| BEC Output | 5v/.8A |
| Lipo Count | 2cell Guarenteed (3 cell capable but not warranted) |
| NiMH | 5-6 |
| Programability | Programming card or Radio Controller |
| Size | 24x12x6mm |
Continuous Current: 6A, Burst: 8A, Weight: 6g,
Plush 6amp Brushless Speed Controller A tight package, with plenty ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 2200MAH 6S 25~50C LIPO PACK
TURNIGY nano-tech lithium polymer ..." />
| Capacity | 2200mAh |
| Dimensions | 119x35x46mm |
| Balance Plug | JST-XH |
| Discharge Plug | XT60 |
Voltage:, 6S1P / 6 Cell / 22.2V, Discharge:, 25C Constant / 50C Burst, Weight:, 353g (including wire, plug & case), Suited to the following models:, MIKADO LOGO400, ALIGN T-REX500, GUAI EP425/550/X5, Compass Atom 500, MSH Protos500, JR Vibe 500E,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
TURNIGY 4000MAH 6S 40C LIPO PACK
| Minimum Capacity | 4000mAh |
| Configuration | 6S1P / 22.2v / 6Cell |
| Constant Discharge | 40C |
| Peak Discharge (10sec) | 50C |
| Pack Weight | 694g |
| Pack Size | 149 x 50 x 43mm |
| Charge Plug | JST-XH |
| Discharge plug | 5.5mm Bullet-connector |
5 Reviews
HobbyKing
TURNIGY NANO-TECH 5000MAH 3S 45~90C LIPO PACK
TURNIGY nano-tech lithium polymer ..." />
: 5000mAh, : 3S1P / 3 Cell / 11.1V, : 45C Constant / 90C Burst, : 425g (including wire, plug & case), : 150x48x27mm, : JST-XH, Discharge Plug:, 4mm Bullet-connector,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 4000MAH 5S 45~90C LIPO PACK
TURNIGY nano-tech lithium polymer ..." />
| 5S x 2 | MIKADO LOGO500SE/600/600SE, ALIGN T-REX600, Century Swift 620SE, Synergy E9 |
: 4000mAh, : 5S1P / 5 Cell / 18.5V, : 45C Constant / 90C Burst, : 583g (including wire, plug & case), : 159x50x36mm, : JST-XH, Discharge Plug:, 4mm Bullet-connector, Suited to the following models:,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
TURNIGY 7MM HEX SOCKET SCREWDRIVER
Turnigy 7mm Hex Socket Screwdriver Ultra strong steel tip, wont ..." />
,
Turnigy 7mm Hex Socket Screwdriver Ultra strong steel tip, wont ...5 Reviews
HobbyKing
TURNIGY 5MM HEAT SHRINK TUBE - BLACK (1MTR)
Turnigy 5mm Heat Shrink Tube - BLACK (1mtr)" />
,
Turnigy 5mm Heat Shrink Tube - BLACK (1mtr)5 Reviews
HobbyKing
TURNIGY 2810 EDF OUTRUNNER 3200KV FOR 55/64MM
Turnigy 2810 EDF Outrunner 3200kv for 55/64mm 3200 Includes 2 ..." />
| Specs | Kv- |
| Dimensions | 46 x 28mm |
| Shaft | 2.3/3.0mm |
| Voltage | 11.1V |
| Weight | 59g |
| No-load current | 1.0A |
| No-load RPM | 35720 |
| Load current | 13.2A |
| Load RPM | 30300 |
| Thrust | 370g |
| Mounting Hole Bolt Circle | 18mm |
| Mtg. Hole Number & Size | 4 x M2.5 |
5 Reviews
HobbyKing
TURNIGY NANO-TECH 850MAH 3S 25~40C LIPO PACK
TURNIGY nano-tech lithium polymer ..." />
| Capacity | 850mAh |
| Dimensions | 63x32x25mm |
| Balance Plug | JST-XH |
| Discharge Plug | Mini-JST |
Voltage:, 3S1P / 3 Cell / 11.1V, Discharge:, 25C Constant / 40C Burst, Weight:, 69g (including wire, plug & case), Suited to the following models:, ALIGN T-Rex250,GAUI EP-255,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
TURNIGY 1800A SERVO 8G/1.5KG/.10SEC (3-PACK)
TURNIGY 1800A 3 ..." />
| Model | TGY-1800A |
| Speed | 0.10sec |
| Torque | 1.5kg/cm |
| Size | 22x11.7x24.3mm |
Voltage:6v, Weight:8g,
Save money and shipping weight with the TURNIGY 1800A 3 ...5 Reviews
HobbyKing
TURNIGY K-FORCE 150A OPTO 2-6S BRUSHLESS ESC
Turnigy K-Force series are based on an all new ..." />
| Output | Continuous 150A, |
| BEC | None. |
| 2 Pole | 210,000rpm |
| 6 Pole | 70,000rpm |
| 12 Pole | 35,000rpm |
| Weight | 125g. |
| *Multiple protection features | Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection |
Specification:, Input Voltage:, 2-6 cells lithium battery or 5-18 cells NIMH battery., Control Signal Transmission:, Optically coupled system., Size:, 88mm (L) * 55mm (W) * 15mm (H).,
The Turnigy K-Force series are based on an all new ...5 Reviews
HobbyKing
TURNIGY 4MM LONG SHAFT FLAT HEAD SCREWDRIVER
Turnigy 4mm long shaft Flat Head Screwdriver Ultra strong steel ..." />
,
Turnigy 4mm long shaft Flat Head Screwdriver Ultra strong steel ...5 Reviews
HobbyKing
TURNIGY G110 BRUSHLESS OUTRUNNER 295KV (1.10 GLOW)
| RPM | 295kv |
| Max current | 55A |
| No load current | 10V/1.2A |
| Current capacity | 65A/15sec |
| Internal resistance | 0.03 ohm |
| Diameter of shaft | 8mm |
| Dimensions | 79x63mm |
Battery:, 8~9S Cell /29.6~33.3V, Weight:, 485g (not including connectors),
Designed to be a direct swap out for your 1.10 ...5 Reviews
HobbyKing
TURNIGY 3~8S VOLTAGE DETECTOR
Turnigy Voltage Detector is very accurate and easy to use. ..." />
| Operating Voltage | 9~33.6V |
Weight:6g,
Turnigy Voltage Detector is very accurate and easy to use. ...5 Reviews
HobbyKing
TURNIGY 3000MAH 3S 40C LIPO PACK
| Spec. Minimum Capacity | 3000mAh |
| Configuration | 3S1P / 11.1v / 3Cell |
| Constant Discharge | 40C |
| Peak Discharge (10sec) | 50C |
| Pack Weight | 278g |
| Pack Size | 145 x 43 x 21mm |
| Charge Plug | JST-XH |
| Discharge plug | 4mm Bullet connector |
5 Reviews