HiModel
CORONA 8-CHANNEL 2.4G SPREAD SPECTRUM/FASST COMPATIBLE RECEIVER R8FA
| Operating voltage range | 4 - 10V |
| Operating current | 70mA @ FASST 7ch mode normal and 110mA max. |
| Latency | 7mS for high speed PPM (HS), 14mS for low speed PPM (LS) @ FASST multi-channel mode |
| Sensitivity | about -96dBm |
, , , , , , Specifications:, , , , , , , , , , , 80mA @ FASST multi-channel mode normal and 110mA max., 8ms for high speed PPM (HS), 16mS for low speed PPM (LS) @ FASST 7ch mode, channel number: 8, , ,
Features: Compatibility: CORONA 2.4G Spread Spectrum FASST compatible receiver is ...HiModel
2.4G 6-CHANNEL MICROLITE DSM2 /DSMX RECEIVER SBUS610E (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 6-Channel and 1 SBUS output Full-Range DSM2 Receiver and 1 SBUS output |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 50x30x13mm |
| ◆ Voltage Range | 3.6-9.6v |
| ◆ Antenna Length Main RX | 30mm*2 |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 8g, Binding Procedure, 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 6channels ◆ 1channels SBUS output ◆ ...3 Reviews
HiModel
2.4G 3-CHANNEL MICROLITE DSM2 /DSMX RECEIVER S3100E (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 3-Channel Full-Range DSM2 Receiver （1 S.BUS output） |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 29x16x7mm |
| ◆ Voltage Range | 3.6-10v |
| ◆ Antenna Length Main RX | 29mm |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 3g, Binding Procedure, 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 3channels ◆ 1channels S.BUS output（1S.BUS output） ...3 Reviews
HiModel
2.4G 6-CHANNEL MICROLITE ADMS RECEIVER DM610E
| Type | 6 CH Parkflyer |
| Modulation | ADMS |
| Dimension(WxLxH) | 18.5x43.5x9.2mm |
| Weight | 4.0g |
| Input Voltage Range | 3.6-10.0V |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, , ,
Features: Features: -6 channel parkflyer receiver -ADMS modulation system -2.4G ...HiModel
2.4G DSM2 SATELLITE RECEIVER FOR 3-AXLE GYRO (MB 3GX, VBAR ETC.)
, , , , , , Specifications:, , , , , , , , , , , 2.4G DSM2 Satellite Receiver for 3-axle Gyro, , ,
Features: Satellite receiver for 3-axis gyros like MB 3GX, VBAR ...HiModel
SMA PLUG TO RP-SMA JACK ADAPTER
| Typical application | plug your current system to your new video Tx instead of buying a new antenna. |
, , , , , , Specifications:, , , , , , , , , , , SMA Plug to RP-SMA Jack Adapter, Refer to here for connector type diagram, Golden plated., , ,
Includes/Requires: Includes: 1x SMA Plug to RP-SMA Jack Adapter * ...HiModel
SPRINGRC 2.4GHZ 6-CHANNEL MINI RECEIVER RG661A
| Channel number | 6 channels |
, , , , , , Specifications:, , , , , , , , , , , Receiver type：RG661A (the receiver using same sticker on top as RG661, but with an additional sticker on the back indicating "Model: SM-RG661A"., Voltage：4.8--6V, Weight：6g, Size：34*20*14mm, Antenna length：14cm, Note: The receiver GR661A does not compatible with previous old version transmitter TG661, and only compatible with the latest version TG661A., , ,
Features: This receiver only work with transmitter SPRINGRC 2.4Ghz 6-Channel ...HiModel
2.4GHZ 3-CHANNEL DSSS RECEIVER FOR N-4Q TRANSMITTER XY300
| ●TYPE | XY300 |
| ●Measurement | 38 x 25 x 16mm |
| ●Net weight | 10g / 0.35oz |
, , , , , , Specifications:, , , , , , , , , , , Specifications:, * This receiver only compatible with DSSS version N-4Q radio (the latest version N-4Q radio now using FHSS technology instead), , ,
Includes/Requires: Includes: 1 x 3-channel 2.4G receiver DSSS 1 x ...2 Reviews
HiModel
2.4GHZ 3-CHANNEL FHSS RECEIVER FOR N-4Q TRANSMITTER XY3000
| ●TYPE | XY300 |
| ●Measurement | 38 x 25 x 16mm |
| ●Net weight | 10g / 0.35oz |
, , , , , , Specifications:, , , , , , , , , , , Specifications:, * This receiver only compatible with FHSS version N-4Q radio., , ,
Includes/Requires: Includes: 1 x 3-channel 2.4G receiver FHSS 1 x ...HiModel
2.4GHZ 6-CHANNEL RECEIVER FOR N-6H TRANSMITTER XY600
| ●TYPE | XY600 |
| ●Measurement | 39 x 25 x 16mm/ 1.51 x 0.99 x 0.63 in |
| ●Net weight | 10g / 0.35oz |
, , , , , , Specifications:, , , , , , , , , , , Specifications:, ●Channel number: 6, * This receiver only compatible with, 2.4Ghz Transmitter N-6H, and, 2.4Ghz Transmitter N-8C, , , ,
Includes/Requires: Includes: 1 x 6-channel 2.4G receiver 1 x binding ...1 Reviews
HiModel
2.4GHZ 3-CHANNEL COLOR LCD TRANSMITTER AND RECEIVER SET TG-04C (BLACK)
| 1) RF range | 2.4000- 2.4835Ghz ISM band |
| 2) Code Type | FSK |
| 3) RF Power | less than 20 Dbm |
| 4) TX current | 150mA typical |
| 5)Modulation signal | 1-3CH, standard PPM pulse width control signal |
| 6) Working voltage | DC 4.8V to 6.0V |
| 1) Frequency band | 2.4000- 2.4835Ghz ISM band |
| 2) Working voltage | DC 4.8V to 6.0V |
| 3) RX current | 30mA typical |
| 4) RX sensitivity | -110dBm typical |
| 5) Demodulate output signal | standard 1-4ch, signal pulse width 1.0 to 2.0ms |
| 7) Control distance | more than 100m on the opining ground. |
| Transmitter color | Black |
, , , , , , Specifications:, , , , , , , , , , , Specifications:, A. TX module:, 7) Automatic selects and change frequency (frequency hopping) after turn on the TX, B. RX module:, 6) LED indicator light for RX sensitivity and frequency ind, , ,
Features: Feature: 1.Be used for RC Car and RC Boat. ...HiModel
WFT06X-A 2.4GHZ 6-CHANNEL RADIO SET W/2 RECEIVERS
| Model | FT06X-A |
| Use in | airplane, HDE helicopter, fixed-pitch helicopter, car, boat |
| Band | 2.400GHz-2.483GHz |
| Output power | ≤100mW |
| Current drain | ≤160mA |
| Modulation | PPM |
| RF module | Set-in |
| Power | 9.6-12V |
| Dual rate range | 100%~125% |
| Mix | Flaperon (Ch 6 and Ch 1 mix) |
| Reverse switch | Ch 1 aileron, Ch 2 elevator, Ch 3 throttle, Ch 4 rudder, Ch 6 Flap/pitch |
| Low voltage warning | battery voltage ＜8.8V, LED glitters and buzzer buzzes once a second; |
, , , , , , Specifications:, , , , , , , , , , , WFT06X-A 2.4GHz 6-Channel Radio Set W/2 receivers, V-tail (Ch 4 and Ch 2 mix), Elevon (Ch 1 and Ch 2 mix), HDE helicopter (Ch 3 to Ch 4 and Ch 6 mix), HDE helicopter (Ch 3 to Ch 6 mix), battery voltage ＜8.3V, LED glitters and buzzer buzzes twice a second., Charge jack, Simulator jack, , ,
Includes/Requires: Includes:1 x transmitter 2 x 6-ch receivers 1 x ...HiModel
WFT07 2.4GHZ 7-CHANNEL RADIO SET W/ WFR07S RECEIVER （10 MODEL MEMORY)
| Model | WFT07 |
| Applications | helicopters,airplane,vehicles,boat |
| Band | 2.4Ghz DSSS(spread Spectrum)+Frequency Hopping |
| Output Power | ≤100mW |
| Current drain | ≤190mA |
| Power | 3.7V-6V |
| Transmitter manual language | English |
, , , , , , Specifications:, , , , , , , , , , , Stick mode: Mode 1 (throttle on right hand) and mode 2 (throttle on left hand) is optional, mode 2 will be sent by default if not specified., *This transmitter uses 3.7V-6V power supply, TX battery higher than 6V may burn the radio and NOT covered by warranty., , ,
Features: ● Large dot matrix LCD.Resolution of 132×64. ● 10class ...13 Reviews
HiModel
2.4GHZ JR DSX3 3-CHANNEL DSM RACING RADIO SYSTEM W/RD350
| Receiver | DSX3 3-Channel DSM |
, , , , , , Specifications:, , , , , , , , , , , Specifications:, , ,
Features: Includes/Requires: Includes: 1 x JR DSX3 transmitter 1 x ...1 Reviews
HiModel
2.4GHZ 8-CHANNEL LCD TRANSMITTER AND RECEIVER SET N-8C
| ●TYPE | N-8C |
| ●Code format | PCM |
| ●Frequency | 2.4G |
| ●DC | 9.6V,≤200mA |
| ●Measurement | 320*240*120mm(Packing measurement） |
| ●Net weight | 995g |
| Channel number | 8 channels |
| Size | 50 x 33 x 16mm |
| Weight | 16.8g/ 0.59 oz |
, , , , , , Specifications:, , , , , , , , , , , Specifications:, Specs of the receiver:, * Plain carton packing., Binding instruction, , ,
Features: Electronic trim， electronic reverse， mode1 and mode2 switch， trainer ...4 Reviews