HobbyKing
GWS R6 NII 6CH FM NARO RECEIVER 35MHZ
| Weight | 7.6~8.2g |
| Ant Length | 50cm |
| System | FM (PPM) Single Conversion |
| Voltage | 3.6~7.2v |
| Current Drain | 7mA |
| Size | 20x30x9.5mm |
| Range | 300mtr+ |
| http | //www.gwsus.com/english/product/receiver/r6n.htm |
Channels: 6,
GWS R6 NII 6Ch FM Naro Receiver The R-6NII has ...5 Reviews
HobbyKing
CORONA 2.4GHZ 8CH RECEIVER (V2 DSSS)
| Size | 46mm*25mm*16mm |
| Voltage | 4.8 V - 6V |
| range | more than 2100m |
| Operating current | 30 MA |
| Sensitivity | -100dbm |
| Latency | 22ms |
5 Reviews
HobbyKing
FRSKY DF 2.4GHZ COMBO PACK FOR FUTABA W/ MODULE & RX
| Futaba | 3PM, 3PK, 7U, 8U, 9C, 10C, 9Z, FN-Series, T10C, FC-18, FC-28. |
| Hitec | Optic 6, Eclipse 7, Prism 7 |
| WFLY | WFT09, WFT-08 |
| Operating voltage | 3.5~10.0V |
| Power consumption | 100mA |
| Resolution | 3072 |
| Latency | 22ms |
| Analog voltage | 0~3.3V |
| Range | 1.5km-2.5km |
| Dimensions | 55 x 25 x 14 mm |
| Weight | 12.4g |
| Version | 2.0 |
| Operating voltage | 6.0V-13.0V (can handle 3S!) |
| Power consumption | 50mA |
| Resolution | 3072 (11bit) |
| Dimensions | 58.5x37.5x22mm |
| Version | 2.0 |
Features:, Advanced Continuous Channel Shifting Technology (ACCST is our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., V8FT:, Receiver Specification:, Number of channels: 8, Module specification:, Output Power:: 60mW, Included:, 1 x 8-channel transmitter module DFT,
FrSKY ACCST technology is proven, approved by many model associations, ...5 Reviews
HobbyKing
X8R 2.4GHZ 8CH RECEIVER
,
The time to upgrade is now. The X8R 2.4ghz receiver ...5 Reviews
HobbyKing
GWS BE-FOUND
| Model | BF-1 |
| [Normal Operation Voltage] 4.8V~7.2V (Max Voltage | 10.0V) |
5 Reviews
HobbyKing
CORONA SYNTHESIZED RECEIVER 6CH 35MHZ (V2)
| http | //www.corona-rc.com/index.php?option=com_content&task=view&id=26&Itemid=56 |
5 Reviews
HobbyKing
FUTABA 6EX 2.4GHZ FAAST RADIO SYSTEM W/R617FS RECEIVER (MODE 2)
| Specifications | Transmitter; |
| Power Supply | 9.6V |
| Current Drain | 170mA |
| Size | 1.6 x 1.1 x .35" (40 x 27 x 9mm) |
| Power Requirement | 4.8 - 6V |
| Current Drain | 80mA (at no signal) |
Programming Features:, Trainer function-transmitter can be master or student, compatible with other Futaba systems, Weight: 7g, Includes:, Futaba 6EX Transmitter,
Six model memory Servo reversing End point adjustment Airplane or ...5 Reviews
HobbyKing
X8 R4 4CH 2.4GHZ RECEIVER (MINI JST PLUG)
| Weight | 2.8g |
Size:, 36 X 14 X 3mm (1.97 X 1.02 X 0.39 inch),
2.4GHz receiver for Assan X8 systems. Compatible with all X8 ...5 Reviews
HobbyKing
HOBBY KING 2.4GHZ 4CH TX & RX V2 (MODE 2)
Note:, Only HK-T6A receiver is comptible with HK-T4A transmitter.,
HobbyKing 2.4Ghz 4Ch Tx & Rx V2 (Mode 2)(THROTTLE ON ...5 Reviews
HobbyKing
CORONA SYNTHESIZED RECEIVER 6CH 72MHZ (V2)
| http | //www.corona-rc.com/index.php?option=com_content&task=view&id=26&Itemid=56 |
5 Reviews
HobbyKing
ORANGERX R100 SATELLITE RECEIVER
| Frequency | 2.4Ghz DSSS (DSM2 Compatible) |
| Size | 21x14x2mm |
| Wire Length | 210mm |
Spec:,
Extend your range and increase your link robustness with the ...5 Reviews
HobbyKing
CORONA 2.4GHZ 6CH RECEIVER (V2 DSSS)
| Size | 46mm*25mm*16mm |
| Voltage | 4.8 V - 6V |
| range | more than 2100m |
| Operating current | 30 MA |
| Sensitivity | -100dbm |
| Latency | 22ms |
| Resolution | 10bit |
5 Reviews
HobbyKing
X8 R6 6CH 2.4GHZ RECEIVER (SHORT ANTENNA)
Size:, 50 X 26 X 10mm (1.97 X 1.02 X 0.39 inch), Weight:8g,
2.4GHz receiver for Assan X8 systems. Compatible with all X8 ...5 Reviews
HobbyKing
X8 2.4GHZ COMBO PACK FOR JR W/ MODULE & RX
| RF Module | X8J |
| Note | Does not fit the MC-24 radio. |
JR: 347,388,783,U8,PCM10,PCM10S,PCM10SX,PCM10IIs,8103,9303, Receiver :, X8R6, X8R7 Mini receiver, Accessories :, Binding plug, Voltage protector,
Assan 2.4Ghz Combo Pack. Includes 1 RF Transmitter and two ...5 Reviews