HobbyKing
RMILEC RD4047P 10CH UHF Receiver (suits TS4047 TX Module)
Frequency Range | 400MHz to 470MHz |
F/S turn on condition | >0.99EBR |
Antenna gain | 2.15DBM |
Refresh rate | 40Hz |
Hopping rate | 40Hz |
Hopping cycle | 13Hz |
Recover time | 77mS |
Refresh rate | 66Hz |
Hopping rate | 66Hz |
Hopping cycle | 22Hz |
Recover time | 45mS |
Response Time | 4mS to 25mS |
PWM Output range | 0.5mS-2.5mS |
Recommend Supply Voltage | 3.5V to 8.4V |
Damage voltage | >15V |
Reverse breakdown voltage | >-15V |
Output ports withstand voltage | >12V |
Normal Current | <60mA |
Operating Temperature | –40 to +80 °C |
Low frequency Power supply noise filter | Include |
High frequency noise filter | Include |
RD4047P Receiver Specifications:, Sensitivity :, -112 DBM @0.1EBR(40Hz Refresh rate)(10Kbps low rate ), PWM Output accuracy:, 0.5uS step ERROR<20PPM, PWM output cycle:, 55Hz @Normal mode / 192Hz @Fast mode, PPM Output accuracy:, 0.5uS step ERROR<20PPM, PPM Output range:, 0.5mS-2.5mS Each channel, PPM output cycle:, 50Hz @ Normal mode & 1mS to 2mS Output, PPM sync pulse width:, 4mS to 16mS Automatic adjust @Normal mode / 4mS unchanging @Fast mode, RSSI output range:, 0-3.3V (RF signal weak <0.8V), Shutdown voltage:3V,
The RMILEC RD4047P 10CH UHF receiver offers the ultimate in range for your FPV model. It is designed for use with the RMILEC TS4047 transmitte module.
-111 DBM @0.1EBR(50Hz Refresh rate)
-110 DBM @0.1EBR(66Hz Refresh rate) (15Kbps high rate)
-108 DBM @0.1EBR(90Hz Refresh rate)
-104 DBM @0.1EBR(125Hz Refresh ...
Check price and availability
Found 5 years, 4 months ago
at
HobbyKing