HobbyKing
RMILEC TS4047 10CH 2.5W UHF Module System w/Receiver (Futaba module)
Hardware frequency Range | 400MHz to 470MHz |
Frequency stability | 2.5ppm |
Output low-pass Filter | NONE |
Frequency Range | 415Mhz-445Mhz |
Step frequency | 480Khz |
Step frequency | 30Khz |
Low rate | 40Hz @10Kbps |
High rate | 66Hz @15Kbps |
RF interface impedance | 50 Ohm |
Supply Voltage | 8.4V to 16V |
Reverse battery protection | NONE |
Logic Voltage | 3-12V |
Frequency Range | 400MHz to 470MHz |
F/S turn on condition | >0.99EBR |
Antenna gain | 2.15DBM |
Refresh rate | 40Hz |
Hopping rate | 40Hz |
Hopping cycle | 13Hz |
Recover time | 77mS |
Refresh rate | 66Hz |
Hopping rate | 66Hz |
Hopping cycle | 22Hz |
Recover time | 45mS |
Response Time | 4mS to 25mS |
PWM Output range | 0.5mS-2.5mS |
Recommend Supply Voltage | 3.5V to 8.4V |
Damage voltage | >15V |
Reverse breakdown voltage | >-15V |
Output ports withstand voltage | >12V |
Normal Current | <60mA |
Operating Temperature | –40 to +80 °C |
Low frequency Power supply noise filter | Include |
High frequency noise filter | Include |
Included in box:, TS4047 transmitter module (Futaba style), TS4047 Module Specifications:, Channel :70, Frequency Range:, 433.05MHz -434.79MHz, Channel:70, Low Output Power:, 30DB -31DB Peak (0.9W-1.2W), High Output Power:, 33DB -34DB Peak (1.9W-2.5W), Current:, 330mA/520mA (@50 Ohm load,12V Supply Voltage), Temperature:, 50 to 70 Degrees Celsius, RD4047P Receiver Specifications:, Sensitivity :, -112 DBM @0.1EBR(40Hz Refresh rate)(10Kbps low rate ), PWM Output accuracy:, 0.5uS step ERROR<20PPM, PWM output cycle:, 55Hz @Normal mode / 192Hz @Fast mode, PPM Output accuracy:, 0.5uS step ERROR<20PPM, PPM Output range:, 0.5mS-2.5mS Each channel, PPM output cycle:, 50Hz @ Normal mode & 1mS to 2mS Output, PPM sync pulse width:, 4mS to 16mS Automatic adjust @Normal mode / 4mS unchanging @Fast mode, RSSI output range:, 0-3.3V (RF signal weak <0.8V), Shutdown voltage:3V,
The RMILEC TS4047 10CH 2.5W UHF Module System offers the ultimate in range for your FPV model. It can be used with any Futaba style module transmitter. This package includes the TS4047 UHF transmitting module, RD4047P UHF 10CH receiver and all necessary hardware.
RD4047P 10CH receiver
Transmitter module antenna
Antenna rack
All necessary hardware/wire leads
- Band 1
- Band 2
250mA/440mA (@No-load,12V Supply Voltage)
950mA/1.6A (@RF Short circuit,12V ...
Check price and availability
Found 5 years, 3 months ago
at
HobbyKing