ReadyMadeRC
3DR UBLOX GPS WITH COMPASS KIT
Features and Specifications:,
This new design incorporates the HMC5883L digital compass, providing a ...ReadyMadeRC
3DR RADIO SET 433MHZ
| Supply voltage | 3.7-6 VDC (from USB or DF13 connector) |
| Transmit current | 100 mA at 20 dBm |
| Receive current | 25 mA |
| Serial interface | 3.3 V UART |
Select your frequency:, Frequency regulations vary by country, so consult your local airspace authority to find out which frequency is legal in your area., The 3DR Radio set includes:, , Specifications:, , *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
Kick your mission planning into real time with 3DR Radios, ...ReadyMadeRC
FRSKY V8FR-II 8 CHANNEL RECEIVER
,
FEATURES Compatible with all FrSky modules (V8_mode & D_mode), receive ...ReadyMadeRC
THE SQUID V2 - POWER CONNECTOR SOLUTION FOR QUADS - T PLUG
,
Introducing "The Squid" V2 power solution for quad copters from ...ReadyMadeRC
SASQUATCH LABS / HOVERTHINGS FLIP SPORT PRO
Product Features & Specs:, , Camera Equipment:, , Not recommended. It's a sport flyer, go fly it, have fun. :), Included in each build:, , Pro Model Features:, , Parts Required To Fly:, , Build and Tuning Documentation:,
Is it possible to improve on an already great design? ...ReadyMadeRC
SOCKET HEAD CAP SCREWS, M2.5 X 6MM (4PCS)
,
Metric Pan Head Phillips Machine Screw - 4 pcs per ...ReadyMadeRC
FRSKY - REPLACEMENT PR10 GIMBAL FOR TARANIS
,
Direct replacement gimbal for the FrSky Taranis transmitter. Works for ...ReadyMadeRC
FLIP SPORT CENTER PLATE (BLACK)
,
Replacement center plate for FLIP SPORT frame (black). Compatible with ...ReadyMadeRC
GEMFAN CARBON FIBER PROPELLER - 10 X 4.5 (2PCS, CW & CCW)
,
These Gemfan Carbon Fiber props are an excellent choice for ...ReadyMadeRC
VAS WRAITH - BASIC KIT
| ATTENTION | According to |
| Range | 9 miles round trip |
| Flight time | 12-20 minutes |
| Top Speed | 75mph |
| Recommended motor | 1600-1800 kV, 150-250 Watts |
| Recommended Battery | 3S 4000 – 3S 5000 mAh Lipo (or 4S 3000 with 1400 kV motor) |
| Build time | 4-6 hours |
Wraith:, , Recommended prop size: 7”, What’s included in the kits:,
UN1133 shipping regulations, the glue contained in t his product ...ReadyMadeRC
FRSKY - GPS SENSOR W/SMART PORT
| Current Draw | 80mA @5v |
| Date Rate | 1Hz |
| Time to fix | 30s cold |
| Speed Accuracy | Approx 0.1m/s |
Specifications:, , Compatibility:,
DC 4-10V 11.3g 40x20x9mm FrSky Smart Port enabled receivers (X8R, ...ReadyMadeRC
CELLPRO POWERLAB 6 V2 WITH EC5 INPUT CABLE, 1000W
| Pack capacity | 20 mAh to 360Ah |
| Voltage resolution | 78uV (16 bit) |
| Voltage tolerance | +/- 6mV |
| Charge current | +/- 1% |
| Capacity added to pack | +/- 1% |
| Percent capacity (“Fuel”) | +/- 5% (with accurate fuel table defined for battery being charged) |
More on the PowerLab Philosophy:, Power is important, but means little without other key features of SAFETY,RELIABILITY, FLEXIBILITY, and INTUITIVE OPERATION; the key elements that are painstakingly crafted into the Cellpro product line. The competition will come along with powerful chargers after we lead, but they will have trouble harnessing this power., SPECFIFICATIONS:, For Battery types:, Lithium Polymer (1s to 6s balanced, 1s to 2s unbalanced), Lithium Ion (1s to 6s balanced, 1s to 2s unbalanced), Lithium Manganese (1s to 6s balanced, 1s to 2s unbalanced), A123 (LiFePO4) (1s to 6s balanced, 1s to 8s unbalanced), NiCd (1s to 19s), NiMH (1s to 19s), 6v, 12v, 24v Lead Acid batteries (Flooded, Gel, AGM, SLA), Input voltage:, 10-32VDC, reverse polarity protected, Input current:, 1A to 40A, software limited, Power conversion:, Synchronous DC/DC converter, supports multiple switcher frequencies of 31.25 kHz, 62.5 kHz, 125 kHz; user selectable by preset, 85% to 93% efficiency depending on output current, Output battery charge current:, Adjustable range 10mA to 40A, limited by 40A input current*, Output battery discharge current:, Internal discharge 10mA to 8A, 50W max Regenerative discharge 10mA to 40A, 1000W max**, Continuous max output power:, 408W @ +12VDC input, 1000W @ +30VDC, Cell balancing:, Resolution 78uV (16 bit) for 1s-8s Li or A123 (LiFePO4) balanced charging, Voltage calibration:, Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV, Current calibration:, Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA, Measurement accuracy:, Serial data output:, 19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity, Data integrity:, Checksum, CRC checking, Cooling fans:, Single, 13 CFM, 50mm diameter, Heat sink:, Internal 120W,
POWER Welcome to PowerLab 6, the second offering in the ...ReadyMadeRC
CELLPRO (JST PA) POWERLAB 12" BALANCE PORT EXTENSION CABLE
,
The 12" extension cable plugs in between the Cellpro PowerLab ...ReadyMadeRC
EZUHF 4 CHANNEL LITE RECEIVER
| Power Requirements | 4.8v - 6v, 33mA |
Specifications:, , Includes:,
Featherweight Long-Range R/C receiver Ideal companion to the EzUHF transmitter. ...