SDSHobby
XQ POWER S3008D 8.5KG/48.5G ADVANCED DIGITAL SERVO FOR RC CAR WITH TITANIUM GEARS & BALL BEARING
| l Weight | 48.5g(1.71oz) |
| l Dimension | 40.2 x 20.1 x 29.4mm |
| l Speed | 0.09sec/60 degree(4.8V); 0.07sec/60 degree(6.0V) |
| l Torque | 7kg/cm(4.8V); 8.5 kg/cm (6.0V) |
| l Operating Voltage | 4.8V-6V |
| l Rotation Angle | 110 degree (when 900~2100 μ sec) |
| l Motor Type | Coreless Motor |
| l Bearing Type | Dual Ball Bearings |
| l Gear Type | Titanium Gears |
| l Splash Water Resistance | YES |
Parameters:,
SDSHobby
HOBBYWING XROTOR 40A BRUSHLESS ESC FOR MULTICOPTER/MULTI-ROTOR-ASIA & PACIFIC AREA VERSION
Features:, Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signal), Specifications:,
Using Multicopter special program, fast throttle response, surpasses all kinds ...SDSHobby
HOBBYWING XROTOR 20A BRUSHLESS ESC FOR MULTICOPTER/MULTI-ROTOR-ASIA & PACIFIC AREA VERSION
Features:, Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signal), Specifications:,
Using Multicopter special program, fast throttle response, surpasses all kinds ...SDSHobby
HOBBYWING XROTOR 10A BRUSHLESS ESC FOR MULTICOPTER/MULTI-ROTOR-ASIA & PACIFIC AREA VERSION
Features:, Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signal), Specifications:,
Using Multicopter special program, fast throttle response, surpasses all kinds ...SDSHobby
POWER HD-3688MG MICRO DIGITAL SERVO 3KG 29G 25T WITH METAL GEAR FOR HELICOPTER LOCK TAIL INSTEAD OF FUTABA S925
| Dimension | 35*15.1*29.5mm |
| Weight (without Servo Arms) | 29 ± 1g |
| Torque | 2.5 kg-cm (4.8V), 3.0 kg-cm (6.0V) |
| Speed | 0.07 sec/60 degree (4.8V), 0.06 sec/60 degree (6.0V) |
| Operating Voltage | 4.8V-6V |
| Rotation Angle | 165 degree (when 800-2200 μ sec) |
| Horn gear spline | 25T* |
| Gear Materials | copper & aluminum |
| Motor Type | coreless motor |
| Bearing | 2PCS |
| Case Material | aluminum & ABS |
| Splash Water Resistance | yes |
| Dead Band | 2μs |
| Typical applications | helicopter lock tail, instead of Futaba S925, ALIGN DS520 DS525M |
Parameters:, Applications:,
Φ 5.77mm Suitable for RC airplane, carSDSHobby
POWER HD-2214S MICRO DIGITAL SERVO 1.2KG 14G 25T WITH METAL GEAR FOR RC AIRPLANE & CAR
| Dimension | 23*12.3*25.6mm |
| Weight (without Servo Arms) | 14.2 ± 0.2g |
| Torque | 0.8 kg-cm (4.8V), 1.2 kg-cm (6.0V) |
| Speed | 0.08 sec/60 degree (4.8V), 0.06 sec/60 degree (6.0V) |
| Operating Voltage | 4.8V-6V |
| Rotation Angle | 150 degree (when 700-2300 μ sec) |
| Horn gear spline | 25T* |
| Gear Materials | copper & aluminum |
| Motor Type | core motor |
| Bearing | 1PCS |
| Case Material | aluminum & ABS |
| Splash Water Resistance | yes |
| Dead Band | 2μs |
Parameters:, Applications:, Suitable for RC airplane, car,
Φ 4.8mmSDSHobby
POWER HD-1250MG MICRO ANALOG SERVO 3.5KG 25G WITH METAL GEAR FOR RC FIXED WING AIRPLANE & CAR & BOAT
| Dimension | 31*16.3*29.5mm |
| Weight | 25.0 ± 1g |
| Torque | 3.0 kg-cm (4.8V), 3.5 kg-cm (6.0V) |
| Speed | 0.14 sec/60 degree (4.8V), 0.12 sec/60 degree (6.0V) |
| Operating Voltage | 4.8V-6V |
| Rotation Angle | 145 degree (when 800-2200 μ sec) |
| Horn gear spline | 21T |
| Gear Materials | copper & plastic |
| Motor Type | core motor |
| Bearing | 1PCS |
| Case Material | ABS |
| Dead Band | 4~5μs |
Parameters:, Splash Water Resistance: no, Applications:, Suitable for RC Fixed Wing airplane,,
car and boatSDSHobby
POWER HD-1900MG MICRO ANALOG SERVO 1.5KG 14G WITH METAL GEAR FOR ALIGN 450 HELICOPTER & EPO AIRPLANE
| Dimension | 23*12.2*27.7mm |
| Weight | 14 ± 1 g |
| Torque | 1.2 kg-cm (4.8V), 1.5 kg-cm (6.0V) |
| Speed | 0.11 sec/60 degree (4.8V), 0.08 sec/60 degree (6.0V) |
| Operating Voltage | 4.8V-6V |
| Rotation Angle | 165 degree (when 800-2200 μ sec) |
| Horn gear spline | 20T* |
| Gear Materials | copper & plastic |
| Motor Type | coreless motor |
| Bearing | none |
| Case Material | ABS |
| Dead Band | 4~5μs |
Parameters:, Splash Water Resistance: no, Applications:, Suitable for RC airplane,
Φ 4.82mmSDSHobby
POWER HD-1900PG MICRO ANALOG SERVO 1.7KG 11G WITH METAL GEAR FOR KT & EPO & TRAINER AIRPLANE
| Dimension | 23.4*12.1*25.4mm |
| Weight | 11 ± 1 g |
| Torque | 1.2 kg-cm (4.8V), 1.7 kg-cm (6.0V) |
| Speed | 0.09 sec/60 degree (4.8V), 0.07 sec/60 degree (6.0V) |
| Operating Voltage | 4.8V-6V |
| Rotation Angle | 165 degree (when 800-2200 μ sec) |
| Horn gear spline | 20T* |
| Gear Materials | copper & plastic |
| Motor Type | coreless motor |
| Bearing | none |
| Case Material | ABS |
| Dead Band | 4~5μs |
Parameters:, Splash Water Resistance: no, Applications:, Suitable for RC airplane,
Φ 4.82mmSDSHobby
FVT 60A BRUSHLESS ESC/SPEED CONTROLLER (SWALLOW SERIES) FOR RC AIRPLANE WITH SBEC & USING BIHELI PROGRAM
| Safety arming feature | Regardless the throttle stick position, the motor will not spin after battery connected. |
| Throttle calibration function | Throttle range can be calibrated to be compatible with different transmitters. |
| Full protection | Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection. |
| Output | Continuous 60A, Burst 80A up to 10 seconds |
| Input Voltage | 2-6cells lithium battery or 5-18 cells NiCd/NiMh battery |
| SBEC | 5A / 5V (switch mode) |
| Refresh rate of the throttle signal | 50Hz to 432Hz |
| Size | 84mm*29mm*22mm |
| Weight | 63g |
Features:, Multiple program methods supported: transmitter stick, USB link Program Card. Very easy to program the ESC at home or at the flying field., Specifications:, Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM. (BLM = Brushless Motor),
It can be comparable with HobbyWing platinum series; With copper ...SDSHobby
FVT 40A BRUSHLESS ESC/SPEED CONTROLLER (SWALLOW SERIES) FOR RC AIRPLANE WITH SBEC & USING BIHELI PROGRAM
| Safety arming feature | Regardless the throttle stick position, the motor will not spin after battery connected. |
| Throttle calibration function | Throttle range can be calibrated to be compatible with different transmitters. |
| Full protection | Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection. |
| Output | Continuous 40A, Burst 50A up to 10 seconds |
| Input Voltage | 2-6cells lithium battery or 5-18 cells NiCd/NiMh battery |
| SBEC | 5A / 5V (switch mode) |
| Refresh rate of the throttle signal | 50Hz to 432Hz |
| Size | 84mm*29mm*22mm |
| Weight | 61g |
Features:, Multiple program methods supported: transmitter stick, USB link Program Card. Very easy to program the ESC at home or at the flying field., Specifications:, Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM. (BLM = Brushless Motor),
It can be comparable with HobbyWing platinum series; With copper ...SDSHobby
FVT 30A BRUSHLESS ESC/SPEED CONTROLLER (SWALLOW SERIES) FOR RC AIRPLANE WITH BEC & USING BIHELI PROGRAM
| Safety arming feature | Regardless the throttle stick position, the motor will not spin after battery connected. |
| Throttle calibration function | Throttle range can be calibrated to be compatible with different transmitters. |
| Full protection | Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection. |
| Output | Continuous 30A, Burst 40A up to 10 seconds |
| Input Voltage | 2-4cells lithium battery or 5-12 cells NiCd/NiMh battery |
| BEC | 3A / 5V (linear mode) |
| Refresh rate of the throttle signal | 50Hz to 432Hz |
| Size | 55mm*28mm*9mm |
| Weight | 25g |
Features:, Multiple program methods supported: transmitter stick, USB link Program Card. Very easy to program the ESC at home or at the flying field., Specifications:, Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM. (BLM = Brushless Motor),
It can be comparable with HobbyWing platinum series; With copper ...SDSHobby
POWER HD-AR1202MG ANALOG ROBOT SERVO WITHOUT WING 3.5KG/60G 25T WITH METAL GEAR & 2 BEARINGS
| Dimension | 40.5*20*38mm |
| Weight (without Servo Arms) | 60 ± 2g |
| Torque | 12 kg-cm (4.8V), 13.5 kg-cm (6.0V) |
| Speed | 0.22 sec/60 degree (4.8V), 0.20 sec/60 degree (6.0V) |
| Operating Voltage | 4.8V-6V |
| Rotation Angle | 165 degree (when 800-2200 μ sec) |
| Horn gear spline | 25T*Φ5.8mm |
| Gear Material | copper |
| Motor Type | core motor |
| Bearing | 2pcs |
| Case Material | ABS |
| Splash Water Resistance | yes |
| Dead Band | 4~5 μs |
Parameters:,
SDSHobby
POWER HD-AR3606HB ANALOG ROBOT SERVO 6.7KG/40G 25T 360DEGREE WITH 2 BEARINGS
| Dimension | 40.5*20*38mm |
| Weight (without Servo Arms) | 40 ± 2 g |
| Torque | 6.0 kg-cm (4.8V), 6.7 kg-cm (6.0V) |
| Speed | 0.16 sec/60 degree (4.8V), 0.14 sec/60 degree (6.0V) |
| Operating Voltage | 4.8V-6V |
| Rotation Angle | 360 degree (when 800-2200 μ sec) |
| Horn gear spline | 25T* |
| Gear Material | plastic |
| Motor Type | core motor |
| Bearing | 2pcs |
| Case Material | ABS |
| Splash Water Resistance | yes |
| Dead Band | 4~5 μs |
Parameters:,
Φ 5.8mmSDSHobby
FVT 6A 4 IN 1 BRUSHLESS ESC/SPEED CONTROLLER (EAGLE SERIES) FOR RC MULTICOPTER WITH BEC & USING BIHELI PROGRAM
| Multiple program methods supported | transmitter stick, |
| Output | Cont. Current 6A, Burst Current 8A up to 10 seconds. |
| Input Voltage | 3S Lipo or 5-9 cells NiMH. |
| BEC | 1A/5V & linear mode BEC. |
| Size | 35*28*3.5mm |
| Weight | 16g |
| User Program-able | Yes |
| ESC Software | BIHELI |
Features:, : Regardless the throttle stick position, the motor will not spin after battery connected., : Throttle range can be calibrated to be compatible with different transmitters., : Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection., Specifications:, Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM. (BLM = Brushless Motor),
Four (4) speed controllers in 1 board, only 1 pair ...