Flying-Hobby
T-REX 600E PRO DFC FUTABA 6J 2.4G RTF COMBO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 1174mm |
| ● Height | 319mm |
| ● Width | 210mm |
| ● Main Blade Length | 600mm |
| ● Main Rotor Diameter | 1347mm |
| ● Tail Rotor Diameter | 260mm |
| ● Motor Drive Gear | 13T |
| ● Main Drive Gear | 112T |
| ● Autorotation Tail Drive Gear | 131T |
| ● Tail Drive Gear | 34T |
| ● Weight(With Motor) | 2290g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Specification(T-REX 600E PRO DFC) :, ●Features, Specification(T-REX 600E PRO DFC) :, ● Drive Gear Ratio: 1:8.61:3.85, Accessories:, ●T-REX 600E PRO DFC Kits Set X1, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
T-REX 600E PRO DFC 1 Castle ICE2 HV 80 Brushless ...Flying-Hobby
KDE DIRECT THRUSTED METAL BEARING BLOCKS - T-REX 500 PRO
Note: the Thrusted Metal Bearing Block design utilizes high-end CNC machining to produce tight and accurate tolerances throughout the part, giving you the best quality upgrade product on the market. With the addition of the thrust-bearings to support all axial loads, more power will be available for hard pitch-pumps, 3D maneuvers, and autorotations; as well as protecting the integrity of the radial bearings. The new design incorporates bearing-retaining button head socket head cap screws and updated machining for easier installation and durability., Includes:, - Two (2) TREX 500 PRO Series Aluminum Thrusted Metal Bearing Blocks, Finish:, Clear anodize, mirror-polish CNC gloss, Weight:, 10 g ea. (design is FEA optimized for maximum strength and minimum weight),
Product description - Two (2) Radial Ball Bearings 8 x ...Flying-Hobby
DS415M DIGITAL SERVO
| ●Stall torque | 2.0kg.cm(4.8V) |
| ●Motion speed | 0.1sec/60°(4.8V) |
| ●Rating voltage | DC 4.8-6.0V |
| ●Temperature range | -20°C~+60°C |
| ●Dimension | 22.9 x 12 x 25.8mm |
| ●Weight | 13.9g |
Instruction:, ●Faster speed with high torque performance, allowing helicopter to perform with faster and higher precision., Specification:, Accessories:, ●Servo rudder piece x 2,
●High rigidity, shock resistant metal gears with high strength composite ...Flying-Hobby
FUTABA S3050 DIGITAL STANDARD HIGH TORQUE BB MG SERVO
| Operating Voltage | 4.8-6.0 Volts |
| Operating Temperature Range | -20 to +60 Degree C |
| Motor Type | 3-Pole Motor |
| Potentiometer Drive | Indirect Drive |
| Bearing Type | Dual Ball Bearings |
| Gear Type | All Metal Gears |
| Connector Wire Length | 12" |
| Weight | 1.6oz. (49g) |
Control System:, +Pulse Width Control 1520usec Neutral, Required Pulse:, 3-5 Volt Peak to Peak Square Wave, Operating Speed (6.0V):, 0.16sec/60 degrees at no load, Stall Torque (6.0V):, 90.2 oz/in. (6.3kg.cm), Operating Angle:, 45 Deg. one side pulse traveling 400usec, 360 Modifiable:No, Direction:, Counter Clockwise/Pulse Traveling 1520-1900usec, Dimensions:, 1.6" x 0.8"x 1.5" (41 x 20 x 38mm),
Flying-Hobby
KBDD 70 MM TAIL BLADES - NEON GREEN
| Color | Neon Green |
Flying-Hobby
OUTRAGE RECEIVER TRAY ASSEMBLY - VELOCITY 50
,
Use for OUTRAGE 50 Nitro/fusion 50 1 x Gyro Tray ...Flying-Hobby
SOCKET SCREW(20)
| FEATURES | Steel construction |
| INCLUDES | Twenty M2x8mm socket screws |
| REQUIRES | Installation onto helicopter |
Flying-Hobby
DS525M DIGITAL SERVO
| ●Stall torque | 2.4kg.cm(4.8V) |
| ●Motion speed | 0.08sec/60°(4.8V) |
| ●Rating voltage | DC 4.8-6V |
| ●Temperature range | -20°C~+60°C |
| ●Dimension | 35.1 x 15.1 x 29mm |
| ●Weight | 29g |
| Working Frequency | 330Hz |
Instruction:, ●Coreless Motor Design for fast speed, high efficiency, and low power consumption., Specification:, Accessories:, ●Servo rudder piece x 2,
●10 Bits signal resolution for smooth movements. ●Response time of ...Flying-Hobby
APLUS 1000MAH-20C 4S1P
| Suggest For | SJM180 . |
| *Standard Discharge Rate | 20C(20A) |
| *MAX Discharge Rate | 25C(25A) |
| *Size | 70 x 35 x 22 mm |
| *Weight | 105g (With Wire) |
Guarantee:, ,
* APLUS batteries are guaranteed by manufacture during first 3 ...