HobbyKing
TURNIGY TRACKSTAR 25A 1/18TH SCALE BRUSHLESS CAR ESC
Cont. Current | 25A |
Burst Current | 90A |
Car Size | 1/18th |
L-BEC | 5V / 1A Output |
Size | 30 x 26.1 x 13.8mm |
Motor Plugs | 3.5mm Bullet type |
Battery Plug | Required |
On/Off Switch | Yes |
Reverse | Yes |
Specification:, Battery:, 2-3 Cell Lipo / 4-12 Cell Ni-XX, Motor Type:, Sensorless Brushless, Weight:, 26g (Including wires),
The Turnigy TrackStar 1/18th scale 25amp car ESC is the ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR 100A 1/10TH SCALE SENSORED BRUSHLESS CAR ESC
Cont. Current | 100A |
Burst Current | 200A |
Car Size | 1/10th |
Battery | 2-3 Cell Lipo |
L-BEC | 5.0V / 2A Output |
Size | 40.5 x 37.5 x 24mm |
Weight | 45g |
Battery Plug | Required |
On/Off Switch | Yes |
Reverse | Yes |
Thermal Overload Protection | Yes |
Battery Terminals | 12AWG size |
Motor Terminals | 12AWG size |
Specification:, Motor Type:, Sensored or Sensorless Brushless,
The Turnigy TrackStar 1/10th scale 100amp car ESC is the ...5 Reviews
Hobby-Lobby
PILOT-1 PA-12 1/8 SCALE ARF RC PLANE
Manufacturer | Piper Aircraft Corp |
Wingspan | 10.8 m (35 ft 5 in) |
Length | 6.86 m (22 ft 6 in) |
Height | 2.08 m (6 ft 10 in) |
Weight, empty | 454 kg (1,000 lb) |
Weight, gross | 793 kg (1,750 lb) |
Top Speed | 184 km/h (115 mph) |
Engine | Lycoming O-235-C, 100 hp |
Includes pre-bent and assembled landing gear, fiberglass cowl, steerable tail wheel, windshield and side glass, wing struts, wheels and hardware pack. For 4-channels: Ailerons (2 channels), Elevator, Rudder and Throttle. A radio with end point, exponential, and rudder mixing is recommended., Technical Specifications:, Length:, 38-1/2", Wingspan:, 53-1/4", Flying Weight:, 34 oz., Controls:, Ailerons (2 servos), Elevator, Rudder, Throttle, Wing Area:, 360 sq. in.,
A great flying Piper that isn't a J-3 53-1/4" wingspan, ...HobbyKing
TURNIGY 1/10 4WD BRUSHLESS SCT4 ARR
Length | 530mm |
Width | 295mm |
Height | 220mm |
Wheel Base | 330mm |
ESC | HK 45A |
Battery Tray | 167mm(L) x 50mm(W) |
Features:, Adjustable camber, caster and shock mounting positions, Specs:, Motor:, HK 3100KV brushless (3650 size), Required:, 2CH radio system (transmitter and receiver),
The Turnigy 1/10 4WD Brushless Short Course Truck is ready ...5 Reviews
ReadyMadeRC
STROBON NAVIGATION STROBE (RED) WITH WIRE
,
It’s really a powerful strobe with low power consumption (50mA ...ReadyMadeRC
HIMAX 2815-1400 BRUSHLESS INRUNNER (TWINSTAR)
,
• Designed as direct replacement for Speed 400/480 can motors ...HobbyKing
X3748-1000 BRUSHLESS OUTRUNNER (HELI)
RPM/v | 1000kv |
Max Watts | 950w |
Resistance (MΩ) | 150 |
Idle Current | 4.2A |
Required ESC | 60A |
Weight | 188g |
Shaft | 5mm |
Connectors | 4mm Bullet |
Specs:, Max Votage:4S,
X3748-1000 Brushless Outrunner (Heli) *Limited Stock5 Reviews
HobbyKing
REAR SHOCK SPRING (2PCS/BAG) - A2030, A2031 AND A2033
,
Rear Shock Spring (2pcs/bag) - A2030, A2031 and A2033Hobby-Lobby
GOLDBERG GENTLE LADY GLIDER ARF
Wingspan | 79 in (2005 mm) |
Wing Area | 674 in |
Weight | 32-36 oz |
Wing Loading | 7-8 oz |
Length | 41 in (1040 mm) |
Technical Specifications:, Goldberg Gentle Lady Glider ARF Specs, Requires:, 2-channel radio with 2 servos & hi-start,
Perfect company for a lazy afternoon If "easy" and "relaxing" ...Hobby-Lobby
PILOT-1 CHAMP 1/8 SCALE ARF RC AIRPLANE
The model comes with all main components pre-built and pre-covered with all hinges pre-slotted and ready to glue. Landing gear is pre-bent and ready to install. Fiberglass cowl is pre-finished to match the color of the airplane. Complete step-by-step photo illustrated instructions assure that even a novice builder will be successful. Assembly will take about 6-8 hours. For 4-channel control: Ailerons (2 servos), Elevator, Rudder and Throttle., Technical Specifications:, Length:, 32", Wingspan:, 52", Flying Weight:, 34 oz., Controls:, Ailerons, Elevator, Rudder, Throttle, Wing Area:, 362 sq. in.,
Classic Civilian Aircraft from Pilot-1 52" wingspan, 32" long, 362 ...Hobby-Lobby
PILOT-1 WACO YKS-6 1/4 SCALE ARF (OVERSIZE)
Our airplane has a 100” wingspan and is 74” long with a 2496 sq. in. wing area (that’s over 17 sq. ft. of wing area). At 20-22 lbs. flying weight, it has a low wing loading typical of a Waco. We included lots of scale detail to bring the model to life: corrugated ailerons, working doors, scale aluminum wheel hubs, airfoiled aluminum wing struts, scale rib spacing and scale outline and colors., *Note:, The two HUGE boxes that this product comes in makes it an Oversize Shipment that has to be delivered by Truck Freight. The additional shipping charge is $250.00. This product is NOT available for shipment outside of the United States and Canada., Technical Specifications:, Length:, 74", Wingspan:, 100", Flying Weight:, 20 - 22 lbs., Controls:, Ailerons, Elevator, Rudder, Throttle, Wing Area:, 2496 sq. in.,
Big scale Golden Age biplane WACO (Weaver Aircraft Company) of ...ReadyMadeRC
EAGLE EYES FPV STATION WITH PLASTIC CASE
, for live PC display of telemetry and firmware update. Note | A standard USB "Mini-B" cable required for these features, but not included. |
FPV Station provides all of the following features:, , Here are the specifications:, ,
EagleEyes TM FPV Station Shipments after May 8 2012 will ...ReadyMadeRC
EASY STAR/SKY SURFER/BIXLER ADJUSTABLE MOTOR MOUNT
Position 1 | stock height up to a 6" prop. |
Position 2 | (+) 0.41" for up to a 7" prop. |
Position 3 | (+) 1.0" for up to an 8" prop. |
Total Weight | 20g |
Three step installation:, , Included:, 1 - Motor Base Tube and Motor Plate, 4 motor screws and 4 mount screws., Notes:, A 35mm outrunner motor will only fit in Position 3 (+ 1.0"). 28mm outrunners will work in any of the three positions. The stock thrust angles are retained in all 3 positions. If a change in thrust angle is desired, simply add a small washer between the motor base and motor plate at the appropriate locations., Compatible Motors:, , Acceptable bolt patterns (units in mm):, 16x16, 16x19, 19x19, 19x25, 25x25,
This CNC machined aluminum two piece mount is designed to ...HobbyKing
FOKKER DR.I TRIPLANE EPO R/C PLANE (PNF)
Wing Span | 800mm |
Length | 670mm |
Flying Weight | 750~900g |
Servo | 3x4.3g 1x9g |
Motor | TURNIGY 2410-890Kv |
ESC | 20A Brushless |
Propeller | 9x4 Slow Fly |
LiPo Battery | 1000~1300mAh 3S (max size |
LiPo Battery | 1000~1300mAh 3S (max size |
5 Reviews